SAFERA PCU6.1-F Installation Manual - page 11
21
20
Connect the power supply Ⓓ to the Sensor unit Ⓐ: indicator light panels ❽ are
lit in purple.
Press the adjustment mode but-
ton ❼: indicator light panels ❽
start blinking purple-blue.
2
1
Without extinguisher unit Ⓔ:
With optional extinguisher unit Ⓔ:
Ensure that the connection hub Ⓕ is
connected between sensor unit Ⓐ and
power supply Ⓓ.
When the indicator light panels ❽ start blinking yellow-green, you need to cali-
brate the system. Choose from the two options:
Check that the indicator light for normal activity ❹ blinks every five seconds.
Option 1:
Cooker and oven are connected
to the Power Control Unit Ⓒ.
1
2
Option 2:
Only cooktop is connected to
the Power Control Unit Ⓒ.
Turn on the biggest cooker plate with
maximum power and press the OK-
button ❷. When you hear
a sound signal, turn off the
cooker.
ѧ HINT
With induction cooker, use a compat-
ible dish.
Turn on the oven and press the child
proof lock button ❶. When you hear
a sound signal, turn off the
oven.
Ⓒ
Ⓒ
Ⓒ
tai
or
Put back the fuses for the cooker
and the oven. The Power Control
Unit Ⓒ will now contact the Sen-
sor unit Ⓐ which gives a sound signal
(•••).
3
ѧ HINT
You can re-start the installation pro-
cess from step 3/6 point 3 anytime
by pressing the adjustment mode
button ❼ for five seconds until you
hear the signal.
ON
Installation - Step 3/6
Set up the wireless connection
Installation - Step 4/6
Calibrate the system