Safescan 1250 Manual - Change The Printer Baudrate
www.safescan.com
8
Baudrate
9600
(default)
19200
38400
115200
57600
1200
(required for
coin counter)
2400
4800
FEED
FEED
FEED
FEED
FEED
FEED
FEED
FEED
CHANGE THE PRINTER BAUDRATE
Once you are in the setting for the baudrate adjustment, the desired value can be selected by pressing FEED. Every time
you press FEED, the applicable value will be printed. Keep pressing FEED until “1200” is printed. The baudrate setting
sequence is a loop and is as follows:
3.
Every time you press SET, the printout will show which parameter is selected, plus its current setting. The next step shows
how to change the setting.
Baudrate
Data Bit
Parity
Handshake
Language
Font
Sensor
Density
Black Mark
Direction
Union
SET
SET
SET
SET
SET
SET
SET
SET
SET
A.
Press both the SET and FEED
button
C.
Release the SET button
B.
Release FEED while still pressing
SET
ON
SET
FEED
+
Click
The printout will now show Exit Set mode. The settings have been saved.
PLEASE NOTE: When the changes are not saved, the printer will go back to default settings after it has been switched off.
For detailed operating instructions please refer to the Safescan TP-230 user manual, included with the printer.
ENGLISH