Safesight SC0301 User Manual - 3. Monitor Wiring Harness
SafesightSC0301‐SC3102Backupcamerasystem
www.qualitymobilevideo.com
Page3
3. Monitor wiring harness
ThisDCpowerconnectorplugsintothemonitor’spowerinputononeend,andsplitsinto
twobarewiresontheother
Note:Intheeventthatthemonitorwillnotrespondpleasemakesureitisreceivinga
videofeed.Thismonitorwillnotturnonwithoutreceivingavideosignal
3.1 Identifying the bare wires
4. Backup Camera
Thecamerahasasinglepigtailwithtwodifferentinputsattheendofthecord,ablackfor
powerandyellowforvideo.Thecameraalsocomeswithinfraredlightsfornighttimeuse.
Note:Infraredlightsoncameraarenotvisiblebythenakedeyebutprovideablack
andwhitepictureatnight.
4.1 Identifying the inputs
Bare Wire color
Connection
Red
Positive + 12 volts – connect this to an
electric terminal controlled by ignition
Black
Negative – 12 volts – connect this to vehicle’s
(metal) body/ clean ground
Input Color
Input Function
Yellow Input
Primary video input
Black DC Power
Connector
This is the DC power connector;
the center pin is positive
12volts. The outer shield is
negative 12 volts.