Safety Basement SB-VR007 Instruction Manual - Charging
PRODUCT MANUAL
Mi6 Mini Voice Recorder : SB-VR9000
Page 3
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Page 3
PRODUCT MANUAL
RolyPoly Voice Recorder : SB-VR007
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
CHARGING
Before you use your voice recorder, you
should charge it for several hours.
You can do this by connecting it to your
computer’s USB port, or use awall adapter
that you can puchase separately. Hint:
Charge faster via wall adapter.
CONNECTING TO A PC
You do not need to download any drivers to connect your device to a PC or Mac.
Simply connect the USB cable to your recorder. Connect the other end directly to a USB
port on your PC. Do not use a hub.
In a few moments, your PC will automatically connect to the voice recorder. The first
time, it may install standard drivers. This is normal. Your voice recorder will charge while
connected, and you can also access the files on it.
You can now use the voice recorder as you would any external drive or USB flash drive.
Remember to EJECT your device before pulling the USB cable out.
This end to computer
USB port. Charge for
about 3 hours