Ucit basic/live 4 camera vehicle video recorder desktop viewer user guide 2016 jun v 1.1 4.
Introduction this user guide will walk you through how to use and operate the desktop viewer software for your ucit 4 camera system. Note: this is a windows application. Table of contents a. Downloading the desktop software…………………………………3 b. Removing and inserting the sd card…………………………..……3-4 c. Inse...
A. Downloading the desktop software 1. Go to our website: www.Safetytrack.Net 2. Hover over the support tab at the top and select camera installation and user manuals. 3. One of the first items listed is the ucit 4 channel system. Under “basic” you will see desktop sd card player. Click this link and...
Insertion: to replace the sd card, push the sd card into the slot until you hear a “click”. Let go as you will hear a second “click” telling you that card is in position. (fig.4) be sure to close the door once the card is in place. (fig.5) twist the silver knob clockwise to tighten the knob down on ...
D. Launching the viewer software viewer layout: after opening the carbox application you will see a screen similar to above. 1. Compass 7. Tool bar (abcde) a. Snapshot 2. Vehicle speed 8. Video playback tools b. Configuration 3. G-sensor 9. Gps/google maps c. Backup 4. Volume 10. Video time finder d....
E. Playback play back is used to playback the video recorded on to the sd card. Once you select playback (section d, no. 7, letter d on page 5), you will enter the playback window. Step 1: select “removable storage” and choose the proper drive your sd card is in. Once the drive is selected video dat...
Depending on the configuration of your sd card. You may see up to 3 different types of events. Two of them will not be overwritten (push button and g-sensor). 1. Record start - this is general continuous recorded video. This is captured when the camera system receives power. This video can be overwri...
Step 1: assuming you want to backup a video(s) from your sd card to your pc, you will just need to select the drive your sd is in under “removable storage”. Step 2: to the left of the id # you will see a white box. Check the video(s) you want to backup by clicking in the box. Step 3: after you have ...
First you will want to select the drive that your micro sd card is in at the top left of the window. This will unlock the fields to configure the micro sd card. 1- video format: choose between d1 or cif format. D1 being the higher quality format, this is recommended unless you are trying to save stora...
4- car information: easily identify vehicle information. Vehicle license plate number, model, vin etc. Can be input here to identify this information quickly. 5- uimode: this will adjust the size of the viewer window. 6- password: this is a feature of the sd card encryption, to prevent others from a...
H. Format when you receive your camera system it will be formatted to the default settings. If you want to clear/format the sd card from all video data be sure to select the correct drive under “removable storage” then click format. If you want to clear the formatting and restore to full disk space ...
Gps: (section d, no. 9 on page 5). This image of a globe will open up a side window to display gps google maps location of the vehicle in relation to the video being played back. Video time finder: (section d, no. 10 on page 5). This allows you to narrow your search to a particular hour and minute i...
