Ucit basic/live dash cam vehicle video recorder desktop viewer user guide 2015 jun v 1.1.
Introduction this user guide will walk you through how to use and operate the desktop viewer software for your ucit 2 camera system. Note: this is a windows application. Table of contents a. Downloading the desktop software…………………………………1 b. Removing and inserting the micro sd card into camera system...
A. Downloading the desktop software 1. Go to our website: www.Safetytrack.Net 2. Hover over the support tab at the top and select camera installation and user manuals. 3. One of the first items listed is the ucit 2 channel system. You will see desktop sd card player. Click this link and you will star...
Insertion: to replace the micro sd card, push the sd card into the slot until you hear a “click”. Let go as you will hear a second “click” telling you that card is in position. Install the tamper proof locking bracket included with your camera. C. Inserting into computer: 1. Once you have recovered ...
D. Launching the viewer software viewer layout: after clicking the software icon you will see the screen above. 1- close application 11- vehicle speed 2- minimize application 12- volume control 3- playback 13- playback control 4- calendar 14- rear view camera 5- backup 15- forward view camera 6- sna...
E. Playback play back is of course used to playback the video recorded on to the sd card. Once you select playback, icon number 3 in section d, you will enter the playback window. Step 1: select “removable storage” and choose the proper drive your sd card is in. Once the drive is selected video data...
Depending on the configuration of your sd card. You may see up to 3 different types of events. Two of them will not be overwritten (push button and g-sensor). 1. Record start - this is general continuous recorded video. This is captured when the camera system receives power. This video can be overwri...
F. Backup here you can save recorded files to your pc. This is done by clicking on backup, number 5 in section d. The backup window will appear like the one below. Step 1: assuming you want to backup a video(s) from your micro sd card to your pc, you will just need to select the drive your micro sd i...
Note: if you backup by original format of micro sd card (*sd), the file recorded with location of gps, speed and g-sensor. (carbox player is used to playback these type of backups.) if backup by the format of (*.Avi), the file recorded date, video and audio. Step 4: backup path: select your backup des...
1- video quality: adjust the video quality to high, normal or low. High is of course recommended for the best video quality. You can adjust to normal or low to have more space on your micro sd card. The higher the quality of video the more storage space it uses. 2- video frame rate: this gives you a...
Very low, low, normal, high, very high. Set the settings according to the night conditions. Example: set to very high if you want the ir’s to provide light to the lens at the slightest sign of darkness. 11- audio recording: choose on or off to enable or disable audio recording. 12- daylight savings ...
I. Calendar and snapshot calendar: choosing the calendar icon (#4) allows you to view a calendar and see how far back the video recording goes back. These days and times will be highlighted once you have started to playback video. This also makes it more convenient in finding a video from a particula...
