Summary of RVS-770616N
Page 2: What’S In The Box?
What’s in the box? • 2 color ccd side cameras w/infra-red weather proof cameras • 1 color ccd w/infra-red weather proof camera • 1 digital 7" tft lcd color monitor with universal mount/stand and wire • 1-66' camera cable for backup camera • 2-33' camera cable for side cameras • 1 remote control • 1 ...
Page 3: Table Of Contents
3 table of contents introduction................................................................................... 4 safety information.................................................................... 5-7 before beginning installation ...................................................... 8 inst...
Page 4: Introduction
Rear view safety 4 introduction congratulations on purchasing a rear view backup camera system. With this manual you will be able to properly install and operate the unit. The backup camera system is intended to be installed as a supplement aid to your standard rear view mirror that already exists i...
Page 5: Safety Information
5 reverse with confidence ™ safety information please read the entire manual and follow the instructions and warnings carefully. Failure to do so can cause serious damage and/or injury, including loss of life. Be sure to obey all applicable local traffic and motor vehicle regulations as it pertains ...
Page 6: Installtion
Rear view safety 6 installtion • electric shock or product malfunction may occur if this product is installed incorrectly. • use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction. • take special care when cleaning the monitor. • make ...
Page 7: Safety Information
7 reverse with confidence ™ safety information in no event shall seller or manufacturer be liable for any direct or consequential damages of any nature, or losses or expenses resulting from any defective product or the use of any product. If you have questions about this product, contact: customer s...
Page 8
Rear view safety 8 before beginning installation before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot or moving parts and electrica...
Page 9: Installation Guide
9 reverse with confidence ™ installation guide camera 1. Attach camera bracket close to rear marker lights, centered on vehicle. 2. Attach camera to bracket using screws provided and adjust the angle. Cable 1. Be sure to position the cable properly. The aviation camera cable uses aircraft grade conn...
Page 10: Wiring Camera & Monitor
Rear view safety 10 wiring camera & monitor • when installing a one (1) camera setup, connect camera extension cable from the rear view camera to port # labeled “backup” (most systems port 3) connect red 12v+ wire to igni- tion power source and black wire 12v- to chassis ground. Do not use white and...
Page 11: Wiring Camera & Monitor
11 reverse with confidence ™ wiring camera & monitor • audio works on two ports of multiplexer and positive triggers must be triggered for audio to operate. #3 port labeled “backup” (blue trigger) #2 port labeled “dvd” (white trigger). • when installing a two (2) camera setup, use ports #3 and #2 an...
Page 12: Installation Diagram
Rear view safety 12 installation diagram figure 1.1 figure 1.2 figure 1.3 figure 1.4 connection of u bracket connection of flushmount bracket on select models.
Page 13: Installing The Monitor
13 reverse with confidence ™ installing the monitor 1 2 3 4 5 10m extension cable 20m extension cable m u lt ip le xe r monitor camera 3 camera 1 1. Dc12v-24v (red) 2. Ground (black) 3. Port #3 (blue) 4. Port #2 (white) 5. Port #1 (yellow) 3 amp fuse video out 20m extension cable camera 2.
Page 14: Monitor Operation
Rear view safety 14 monitor operation menu rev cam ▼ ▼ power on / off menu/ selection button camera selection down arrow up arrow rotation imager (exit when in menu mode) • to turn on the monitor, press “on” button. • to adjust brightness, press “menu” 1 time and use arrows • to adjust contrast, pre...
Page 15: Splitting & Splicing
15 reverse with confidence ™ splitting & splicing installing & splitting embedded monitor installing sun shield: put shade cover on the display. Installing back cover: put the monitor with shade cover in the back cover (only for embedded monitor) splitting back cover: hold monitor with 2 hands and d...
Page 16: Positioning
Rear view safety 16 positioning rear & side cameras positioning.
Page 17: Multiplexer
17 reverse with confidence ™ multiplexer port #1 port #2 port #3 or dvd backup.
Page 18: Monitor Dimensions
Rear view safety 18 monitor dimensions with sun shade 5.25” 7” some models power on/off menu/ selection button camera selection down arrow up arrow rotation imager (exit in menu mode) power video select down/up menu mirror/normal image.
Page 19: Monitor Specifications
19 reverse with confidence ™ monitor specifications tft lcd digital monitor screen size 7” dot resolution 800 h x 480 v display format 16:9 / 500:1 display brightness 400cd/m 2 viewing angle u:50° / d:60° / r:70° video input 3 channel video source 1vp-p, 75 Ω power supply dc 12v-24v (+/- 10%) power ...
Page 20: Rear Camera Dimensions
Rear view safety 20 rear camera dimensions 3” 3.25” rear camera.
Page 21: Rear Camera Specifications
21 reverse with confidence ™ rear camera specifications camera 1/4” sharp® color ccd picture elements 250,000 pixels gamma correction image sensor r=0.45 to 1.0 600 tv lines pal:500h x lens 582v, ntsc: 510h x 492v 2.1mm view angle sync system 130° internal synchronization infrared distance usable il...
Page 22: Side Camera Dimensions
Rear view safety 22 side camera dimensions side camera 2 .5 ” 3.5 ” 1 .8 5 ” .8 65 ”.
Page 23: Side Camera Specifications
23 reverse with confidence ™ side camera specifications camera 1/4” sharp® color ccd picture elements 250,000 pixels gamma correction image sensor r=0.45 to 1.0 420 tv lines pal:500h x 582v ntsc: 510h x 492v lens 2.1mm view angle 120° sync system internal synchronization infrared distance 30 feet (9...
Page 24: Troubleshooting
Rear view safety 24 troubleshooting monitor display blue screen & displays no signal • do a hard reset, unplug all cables and power cables from multiplexer (silver box) leave out for 1 minute and then re-connect them. • check to ensure that the con- nection to the camera is tight. • verify camera ca...
Page 25: Warranty
25 reverse with confidence ™ warranty one year warranty rear view safety, inc. Warrants this product against material defects for a period of one year from date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. Rear view safety, inc. Is not respon...
Page 26: Disclaimer
Rear view safety 26 disclaimer rear view safety and/or its affiliates does not guarantee or promise that the user of our systems will not be in/part of an accident or otherwise not collide with an object and/or person. Our systems are not a substitute for careful and cautious driving or for the cons...
Page 27
If you have any questions about this product, contact: rear view safety, inc. 1797 atlantic avenue brooklyn, ny 11233 800.764.1028 better cameras. Better service. It’s our guarantee. 23.