1. DL manuals
  2. Safety Vision
  3. Monitor
  4. SV-LCD70A
  5. Owner's Manual

Safety Vision SV-LCD70A Owner's Manual

Manual is about: 7" DIGITAL TFT LCD COLOR ALL ROUND VISION MONITOR

Summary of SV-LCD70A

  • Page 1

    Owner's manual please read carefully before using and keep in a safe place. 7" digital tft lcd color all round vision monitor (multiple display mode) design and specifications are subject to change without notice. Model: sv-lcd70a.

  • Page 2: Model No.

    2 owner's record r the model and serial numbers are located on the rear of the unit. Record the serialnumber in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product. To avoid electric shock, do not open the cabinet. Refer servicing to qualified p...

  • Page 3: 7" Digital Tft Lcd Color

    3 r suggestions 7" digital tft lcd color all round vision monitor safety 1 use only dc 10v ~ dc 32v. If liquid or dust leaks into the case, turn off power to the unit and consult an experienced technician before using. Installation 2 do not install the units in an extremely hot or humid place (radia...

  • Page 4

    R package contents 4 please check that you have the correct contents before using this product. If any items are missing, please contact your dealer. Sv-70a monitor sun visor power cord control box screw kits cable reinforcement instruction manual stand bracket owner's manual please read carefully b...

  • Page 5: Power (On/off)

    Dn up + 5 operations r power - / + up / down source menu day/night sensor 1 2 3 4 5 6 power (on/off) 1 stand-by mode 1. When red led is turned on, it indicates the power is applied and it is on stand/by mode. 2. The monitor is not turned off until the ignition key is at off position. 1. Press to tur...

  • Page 6: Day/night Sensor

    6 operations r day/night sensor 6 automatically adjusts the brightness of the image to the lighting conditions in the immediate vicinity of the monitor. The built-in day/night sensor on the front of the sv-lcd70a monitor captures the light and activates the day/night mode. The sensitivity of the day...

  • Page 7: 1. Display Menu

    7 operations r 1. Display menu 2. Main menu shifting option setting long key (more than 2 sec) short key (more than 0.5 sec) menu menu selecting source source source source option setting exit menu shifting up / dn up / dn 30 30 30 30 bright contrast color tint display menu 30 30 30 30 bright contra...

  • Page 8: Camera Setting

    8 operations r cam1 cam2 cam3 cam4 1. Camera setting camera setting 1 m a i n m e n u 1. Camera setting 2. Trigger setting 3. Split setting 4. Day/night setting 5. Auto scan setting 6. Advanced menu nor/mir: [mirror;normal] name:[cam1_ _ _ _ ] sort: [normal;shutter; tilt.Mt; tilt.At] each normal/mir...

  • Page 9: Trigger Setting

    9 operations r trigger1 2 trigger3 trigger4 trigger5 trigger 2. Trigger setting trigger setting 2 source: [cam1~4;aux;split2~4] delay: [0~20 sec] 1. User can use 5 triggers and each trigger source(cam1~split4) can be selected. 2. When the trigger is activated, the selected source’s image is displaye...

  • Page 10: Split Setting

    10 operations r marker setting split2 split3 left-right up-down width 1. Position & width setting for distance marker when any trigger is engaged. - various images can be displayed at the same time; the sources for shared images can be assigned to split2, split3 and split4. -split2 (dual screen disp...

  • Page 11: Day/night Setting

    11 operations r option setting option setting exit menu shifting up / dn menu up dn - / + + a split4 source1:[cam1~cam4] source3:[cam1~cam4;off] source4:[cam1~cam4;off] audio:[cam1~cam4] source2:[cam1~cam4] split4 user can adjust the sensitivity of day/night sensor. 4 day/night setting sensor:[on;of...

  • Page 12: Auto Scan Setting

    12 operations r 5 auto scan setting auto scan:[on;off] auto scan delay 5. Auto scan setting auto scan:[on;off] auto scan delay on/off setting for auto scan function. The auto scanning time of each camera can be adjusted(0~30sec). Up / dn split2~split4 a selecting source source exit menu shifting up ...

  • Page 13: Advanced Menu

    * off setting: monitor keeps "stand-by" setting regardless of the last mode before the ignition key is turned off. * on setting: monitor is turned on automatically when the ignition key is switched on regardless of the last mode the monitor was in the last time it was turned off. * auto setting: mon...

  • Page 14: Sunvisor        Monitor

    14 installation r dash board screw monitor sunvisor monitor 1 2 stand bracket.

  • Page 15

    15 system connections r power/trigger wire functions ca1 ca2 ca3 ca4 power input dc10v~32v av-in av-out v a v a ir-receiver control box sv-lcd70a monitor shutter camera/tilt camera/normal camera 1 red power in dc(10 to 32v) 2 black ground 3 green trigger1 4 white trigger2 5 blue trigger3 6 yellow tr...

  • Page 16: ㎡

    16 specifications r power input video system panel backlight resolution viewing angle format display mode operating temp. Storage temp. Vibration osd control osd language option dimension weight supplied acc’y dc 12v (from control box) ntsc / pal compatible 7" digital led(400cd/ ) ㎡ 800 x 3(rgb) x 4...

  • Page 17

    This symbol means do not dispose of as municipal waste. Re-use or recycle wherever possible. Electrical / electronic components may contain substances which are harmful to the environment. For environmentally sound methods of disposal, please contact your local government authority. Printed in korea.