Instruction manual phv-130 mechanical/hydraulic machine vice 130mm v330 page 1 instruction manual for phv-130 (v330) 05/12/2014.
Page 2 instruction manual for phv-130 (v330) 05/12/2014.
Before operation check the following 1. Check the accuracy sheet and attachment 2. Remove the protective layers of grease and rust preventive before moving the slides. 3. Lubricate all slide ways and lubrication points 4. After setting the vice to the work piece size check that the lock pin is secur...
Before installing vice on the table 1. Insure that the bottom of the vice the table and the tee slots are clean and free of swarf. 2. Secure the tee slot blocks provided into the base of the vice with the allen head screws. Note! Make sure that the tee slot blocks are the correct size for the table ...
Operating instructions 1. Clamping with hydraulic power a. Insure that the four lines on the hydraulic spindle 34 are visible. To bring them into full view hold the cylinder 35 body and turn the spindle 32 counter clockwise. B. Slide the collar 33 to the non en-gauge position. C. Turn the handle clo...
Page 6 instruction manual for phv-130 (v330) 05/12/2014.
Page 7 instruction manual for phv-130 (v330) 05/12/2014.
Page 8 instruction manual for phv-130 (v330) 05/12/2014.
Page 9 instruction manual for phv-130 (v330) 05/12/2014.
Other products compact cnc vice double lock cnc vice air operated production vice page 10 instruction manual for phv-130 (v330) 05/12/2014.
