1. DL manuals
  2. Safire
  3. DVR
  4. DVR6100V-H Series
  5. User Manual

Safire DVR6100V-H Series User Manual - 4.3 Ptz Control Toolbar

Summary of DVR6100V-H Series

  • Page 1

    Digital video recorder user manual ud.7l0202d1437b01.

  • Page 2

    User manual of dvr6100v-h series dvr 1 regulatory information fcc information fcc compliance : this equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful int...

  • Page 3

    User manual of dvr6100v-h series dvr 2 thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to the following models: dvr6104v-h, dvr6108v-h, dvr6116v-h this manual may contain several technically incorrect plac...

  • Page 4

    User manual of dvr6100v-h series dvr 3 preventive and cautionary tips before connecting and operating your device, please be advised of the following tips: • ensure unit is installed in a well-ventilated, dust-free environment. • unit is designed for indoor use only. • keep all liquids away from the...

  • Page 5: Product Key Features

    User manual of dvr6100v-h series dvr 4 product key features general connectable to the network cameras and network domes (this feature is supported by hdvr series). Pal/ntsc adaptive video inputs. H.264 video compression with high reliability and superior definition. Encoding at up to wd1 (pal: 960×...

  • Page 6

    User manual of dvr6100v-h series dvr 5 searching record files by event. Customization of tags, searching and playing back by tags. Locking and unlocking record files. Local redundant recording. Searching and playing back record files by channel number, recording type, start time, end time, etc. Smar...

  • Page 7

    User manual of dvr6100v-h series dvr 6 alarm event and exception information can be sent to the remote host. Remotely start/stop recording. Upgrade by remote ftp server. Remote ptz control. Two-way audio and voice broadcasting. Embedded web server. Development scalability: sdk for windows and linux ...

  • Page 8: Table Of Contents

    User manual of dvr6100v-h series dvr 7 table of contents product key features ................................................................................................................................... 4 c h a p t e r 1 ...........................................................................

  • Page 9

    User manual of dvr6100v-h series dvr 8 5.2 configuring record schedule .............................................................................................................. 52 5.3 configuring motion detection record ..............................................................................

  • Page 10

    User manual of dvr6100v-h series dvr 9 9.2.4 configuring snmp ................................................................................................................ 106 9.2.5 configuring nat ......................................................................................................

  • Page 11

    User manual of dvr6100v-h series dvr 10 12.4.2 upgrading by ftp ............................................................................................................... 147 12.5 restoring default settings ...........................................................................................

  • Page 12: C H A P T E R 1

    User manual of dvr6100v-h series dvr 11 c h a p t e r 1 introduction.

  • Page 13: 1.1 Front Panel

    User manual of dvr6100v-h series dvr 12 1.1 front panel dvr6104/08/16v-h the front panel ofdvr6100v-hseries dvr is shown in figure 1.1: figure 1.1 front panel table 1.1 description of control panel buttons no. Name function description 1 power power indicator turns green when dvr is powered up. 2 st...

  • Page 14

    User manual of dvr6100v-h series dvr 13 figure 1.2 remote control table 1.2 description of the ir remote control buttons no. Name description 1 power power on/off the device. 2 dev enables/disables remote control. 3 alphanumeric buttons switching to the corresponding channel in live view or ptz cont...

  • Page 15

    User manual of dvr6100v-h series dvr 14 no. Name description 11 prev button switching between single screen and multi-screen mode. 12 direction/enter buttons navigating between different fields and items in menus. In playback mode, the up and down button are used to speed up and slow down the playin...

  • Page 16: 1.3 Usb Mouse Operation

    User manual of dvr6100v-h series dvr 15 1.3 usb mouse operation a regular 3-button (left/right/scroll-wheel) usb mouse can also be used with this device. To use a usb mouse: 1. Plug usb mouse into one of the usb interfaces on the front panel of the device. 2. The mouse should automatically be detect...

  • Page 17: 1.5 Rear Panel

    User manual of dvr6100v-h series dvr 16 1.5 rear panel dvr6104v-h the rear panel of the dvr is shown in figure 1.6. Figure 1.4 rear panel dvr6116v-h the rear panel of dvr6116v-h is shown in figure 1.7. Figure 1.5 rear panel note: the rear panel of dvr6108v-h provides 8 video input interfaces. Table ...

  • Page 18

    User manual of dvr6100v-h series dvr 17 connection is working properly. Starting up the device: steps: 1. Check the power supply is plugged into an electrical outlet. It is highly recommended that an uninterruptible power supply (ups) be used in conjunction with the device. 2. Press the power button...

  • Page 19: C H A P T E R 2

    User manual of dvr6100v-h series dvr 18 c h a p t e r 2 getting started.

  • Page 20

    User manual of dvr6100v-h series dvr 19 2.1 using the wizard for basic configuration the setup wizard can walk you through some important settings of the device. By default, the setup wizard starts once the device has loaded. Operating the setup wizard: 1. Select the system language from the drop-do...

  • Page 21

    User manual of dvr6100v-h series dvr 20 figure 2.3 login window 4. Click the next button to enter the date and time settings window, as shown in figure 2.4. Set the time zone, date format, system date and system time. Figure 2.4 date and time settings 5. Click next button which takes you back to the...

  • Page 22

    User manual of dvr6100v-h series dvr 21 6. Click next button to enter the advanced network settings window. 7. Configure the advanced network parameters, including the server port, http port, rtsp port, upnp and ddns settings. Figure 2.6 advanced network configuration 8. Click next button toenter th...

  • Page 23

    User manual of dvr6100v-h series dvr 22 10. Click search to search ip camera. Click add to add ip camera (only supported by hdvr series). 11. After finishing ip camera settings , c lick next to enter the record settings window. 12. Click next button to enter the record settings window, as shown in f...

  • Page 24

    User manual of dvr6100v-h series dvr 23 2.2 adding and connecting the ip cameras note: this chapter is available for the hdvr models only. 2.2.1 adding the ip cameras purpose: the hdvr series can be connected with the network cameras and record the video from them. Before you can get a live view or ...

  • Page 25

    User manual of dvr6100v-h series dvr 24 figure 2.12 ip camera management 2) select a camera from the list and click the icon to add it automatically. Or click the button add all to add all the online cameras automatically. The user name and password are admin and 12345 by default. 3) optionally, you...

  • Page 26

    User manual of dvr6100v-h series dvr 25 figure 2.14 successfully added ip cameras 3. Import/export the configuration file of the ip cameras. Import the configuration file of ip cameras to the device: connect the backup device on which the configuration file is stored. 1) click the ip camera import/e...

  • Page 27

    User manual of dvr6100v-h series dvr 26 figure 2.16 attention-importing succeeded export the configuration file of ip cameras to backup device: connect the backup device on which the configuration file is stored to the device. 1) click the ip camera import/export tab. Figure 2.17 export ip camera co...

  • Page 28

    User manual of dvr6100v-h series dvr 27 setting of the cameras if needed. Steps: 1. Click the icon on the camera list to enter the edit ip camera interface. Figure 2.19 edit ip camera 2. Edit the camera information, such as the ip address, protocol, port, etc. 3. Click the button ok to save the new ...

  • Page 29: C H A P T E R 3

    User manual of dvr6100v-h series dvr 28 c h a p t e r 3 live view.

  • Page 30

    User manual of dvr6100v-h series dvr 29 3.1 introduction of live view live view shows you the video image getting from each camera in real time. The device automatically enters live view mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the esc many times (dependi...

  • Page 31

    User manual of dvr6100v-h series dvr 30 3.2 operations in live view mode in live view mode, the following functions can be realized: • single screen: showing only one screen on the monitor. • multi-screen: showing multiple screens on the monitor simultaneously. • auto-switch: the screen is auto swit...

  • Page 32

    User manual of dvr6100v-h series dvr 31 auto-switch. / show/hide toolbar note: the add ip camera item is provided by the hdvr models only. 3.2.2using an auxiliary monitor certain features of the live view are also available while in an aux monitor. These features include: • single screen: switch to ...

  • Page 33

    User manual of dvr6100v-h series dvr 32 3.2.4 quick setting toolbar in live view mode on the screen of each channel, there is a quick setting toolbar which shows when you left-click mouse on the camera. Figure 3.3 quick settings toolbar table 3.3 description of quick setting toolbar icons icons desc...

  • Page 34

    User manual of dvr6100v-h series dvr 33 image settings icon can be selected to enter the image settings menu. Steps: 1. Set the period of a day for configuring independent image parameters so as to satisfy different light conditions, e.G., daylight and night time. Two periods can be configured. When...

  • Page 35

    User manual of dvr6100v-h series dvr 34 3.3 configuring live view settings purpose: live view settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Ste...

  • Page 36

    User manual of dvr6100v-h series dvr 35 figure 3.7 live view- camera order to set the camera order: 1) click the view tab to enter the camera order settings interface. 2) select an output interface and select a screen layout. 3) click to select a screen in the right region and double-click to select...

  • Page 37: 3.4 Channel-Zero Encoding

    User manual of dvr6100v-h series dvr 36 3.4 channel-zero encoding purpose: sometimes you need to get a remote view of many channels in real time from web browser or cms (client management system) software, in order to decrease the bandwidth requirement without affecting the image quality, channel-ze...

  • Page 38

    User manual of dvr6100v-h series dvr 37 figure 3.9 video quality diagnostics notes: connect the analog signal to the device for the video quality diagnostics. Three exception types can be diagnosed: blurred image, abnormal brightness and color cast. You can enter menu> configuration> video quality d...

  • Page 39: 3.6 User Logout

    User manual of dvr6100v-h series dvr 38 3.6 user logout purpose: after logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password to log in again. Steps: 1. Enter the shutdown menu. Menu>shutdown figure 3.10 shutdown menu 2. Cl...

  • Page 40: C H A P T E R 4

    User manual of dvr6100v-h series dvr 39 c h a p t e r 4 ptz controls.

  • Page 41: 4.2.1 Customizing Presets

    User manual of dvr6100v-h series dvr 40 4.1 configuring ptz settings purpose: follow the procedure to set the parameters for ptz. The configuring of the ptz parameters should be done before you control the ptz camera. Before you start: check that the ptz and the device are connected properly through...

  • Page 42: 4.2.2 Calling Presets

    User manual of dvr6100v-h series dvr 41 figure 4.2 ptz- more settings 2. Use the directional button to wheel the camera to the location where you want to set preset. 3. Click the round icon before save preset. 4. Click the preset number to save the preset. Repeat the steps2-4 to save more presets. I...

  • Page 43: 4.2.3 Customizing Patrols

    User manual of dvr6100v-h series dvr 42 figure 4.4 ptz- call preset 3. Choose the preset number. Call preset in live view mode: steps: 1. In the live view mode, you can press the ptz control button on the ir remote control, or choose the ptz control icon to enter the ptz toolbar. You can also access...

  • Page 44

    User manual of dvr6100v-h series dvr 43 following the steps above in customizing presets. Steps: 1. Enter the ptz control interface. Menu>camera>ptz>more settings 2. Select patrol number. 3. Select the under patrol option box to add key points for the patrol. Figure 4.6 ptz- add key point 4. Configu...

  • Page 45: 4.2.4 Calling Patrols

    User manual of dvr6100v-h series dvr 44 figure 4.8 keypoints deletion 4.2.4 calling patrols purpose: calling a patrol makes the ptz to move according the predefined patrol path. Call patrol in the ptz setting interface: steps: 1. In the ptz setting interface. Menu> camera> ptz> more settings 2. Sele...

  • Page 46: 4.2.5 Customizing Patterns

    User manual of dvr6100v-h series dvr 45 figure 4.10 ptz toolbar- call patrol 4.2.5 customizing patterns purpose: patterns can be set by recording the movement of the ptz. You can call the pattern to make the ptz movement according to the predefined path. Steps: 1. Enter the ptz control interface. Me...

  • Page 47: 4.2.6 Calling Patterns

    User manual of dvr6100v-h series dvr 46 4.2.6 calling patterns purpose: follow the procedure to move the ptz camera according to the predefined patterns. Call pattern in the ptz setting interface steps: 1. Enter the ptz control interface. 2. Select the pattern number. 3. Click , then the ptz moves a...

  • Page 48: 4.3 Ptz Control Toolbar

    User manual of dvr6100v-h series dvr 47 4.3 ptz control toolbar in the live view mode, you can press the ptz control button on the ir remote control, or choose the ptz control icon to enter the ptz toolbar. You can also access the ptz control toolbar by clicking the ptz button in the ptz settings in...

  • Page 49: C H A P T E R 5

    User manual of dvr6100v-h series dvr 48 c h a p t e r 5 record settings.

  • Page 50

    User manual of dvr6100v-h series dvr 49 5.1 configuring encoding parameters purpose: by configuring the encoding parameters you can define the transmission stream type, the resolution and so on. Before you start: 1. Make sure that the hdd has already been installed. If not, please install a hdd and ...

  • Page 51

    User manual of dvr6100v-h series dvr 50 figure 5.3(1) encoding parameters-main stream (analog camera) figure 5.4 (2) encoding parameters-main stream (ip camera) 2. Set encoding parameters for main stream 1) select record to enter the main stream settings interface. 2) select the camera for configura...

  • Page 52

    User manual of dvr6100v-h series dvr 51 reference. 4) configure the pre-record, post-record time, expired time, redundant record (this option is only available when the hdd mode is group) and whether you want to record audio. Pre-record: the time you set to record before the scheduled time or event....

  • Page 53

    User manual of dvr6100v-h series dvr 52 figure 5.6 encoding parameters-sub-stream 2) configure the parameters for the sub-stream. Refer to the step of main stream settings. 3) click apply to save the settings. Note: you can click the restore button to restore the current sub-stream settings to the d...

  • Page 54

    User manual of dvr6100v-h series dvr 53 1) click edit. 2) in the message box, you can choose the day which you want to set schedule. 3) to schedule an all-day recording, check checkbox to enable all-day recording. 4) set the type in the dropdown list. 5) note: to enable motion triggered recording, y...

  • Page 55

    User manual of dvr6100v-h series dvr 54 task 2: draw the schedule steps: 1) click the icon on the right to select a record type. Different recording types are available for different models. Note: to enable motion triggered recording, you must configure the motion detection settings. For detailed in...

  • Page 56

    User manual of dvr6100v-h series dvr 55 5.3 configuring motion detection record purpose: follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the device can analyze it and perform some response actions to handle it. Enabling motio...

  • Page 57

    User manual of dvr6100v-h series dvr 56 figure 5.15 motion detection handling note: ip camera is supported by hdvr series only. 5) select the channels which you want the motion detection event to trigger recording. 6) click apply to save the settings. 7) click ok to back to the upper level menu. 8) ...

  • Page 58

    User manual of dvr6100v-h series dvr 57 figure 5.17 edit schedule- motion detection 3) in the message box, you can choose the day to which you want to set schedule. 4) set the type as motion. 5) to schedule an all-day recording, check the checkbox after the all day item. 6) to arrange other schedule...

  • Page 59

    User manual of dvr6100v-h series dvr 58 5.5 configuring manual record purpose: follow the steps to set parameters for the manual record. When using manual record, you need to manually cancel the record. The manual recording is prior to the scheduled recording. Steps: 1. Enter the manual settings int...

  • Page 60

    User manual of dvr6100v-h series dvr 59 channels. 5.6 configuring holiday record purpose: you may want to have different plan for recording on holiday. Follow the steps to configure the record schedule on holiday. Steps: 1. Enter the record setting interface. Menu>record 2. Choose holiday on the lef...

  • Page 61

    User manual of dvr6100v-h series dvr 60 6) click ok to exit the edit interface. 4. Enter record schedule settings interface. Menu> record> schedule 1) select record. 2) check the checkbox after enable schedule. 3) click edit. 4) select holiday from the schedule dropdown list. Figure 5.24 edit schedu...

  • Page 62

    User manual of dvr6100v-h series dvr 61 5.7 configuring redundant record purpose: enabling redundant recording, which means saving the record files not only in the r/w (read/write) hdd but also in the redundant hdd, will effectively enhance the data safety and reliability. Note: you must set the sto...

  • Page 63

    User manual of dvr6100v-h series dvr 62 figure 5.27 encoding record 2) select camera you want to configure. 3) check the checkbox of the redundant record. N otes: 1. The redundant record option is only available when the hdd mode is group. 2. The redundant record is used when you want to save the re...

  • Page 64

    User manual of dvr6100v-h series dvr 63 5.8 configuring hdd group for record purpose: you can group the hdds and save the record files in certain hdd group. Steps: 1. Enter hdd setting interface. Menu>hdd figure 5.28 hdd-general 2. Select advanced on the left bar. Check whether the storage mode of t...

  • Page 65: 5.9 Files Protection

    User manual of dvr6100v-h series dvr 64 5.9 files protection purpose: you can lock the recorded files or set the hdd property to read-only to protect the record files from being overwritten. Protect file by locking the record files: steps: 1. Enter playback setting interface. Menu> export figure 5.3...

  • Page 66

    User manual of dvr6100v-h series dvr 65 figure 5.32 unlocking attention protect file by setting hdd property to read-only note: to edit hdd property, you need to set the storage mode of the hdd to group. See chapter 10.3 、 、 managing hdd group. Steps: 1. Enter hdd setting interface. Menu> hdd figure...

  • Page 67: C H A P T E R 6

    User manual of dvr6100v-h series dvr 66 c h a p t e r 6 playback.

  • Page 68

    User manual of dvr6100v-h series dvr 67 6.1 playing back record files 6.1.1 playing back by channel purpose: play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel: steps: choose a channel in live view mode using the m...

  • Page 69

    User manual of dvr6100v-h series dvr 68 the toolbar in the bottom part of playback interface can be used to control playing progress, as shown in figure 6.3. Figure 6.3 playback interface check the checkboxes to select the channel(s), and then the video from the selected channels will be played back...

  • Page 70: 6.1.2 Playing Back By Time

    User manual of dvr6100v-h series dvr 69 button operation button operation button operation normal playback notes: playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. About video type bar: represents normal recording (manual o...

  • Page 71

    User manual of dvr6100v-h series dvr 70 figure 6.6 interface of playback by time figure 6.7 toolbar of playback by time table 6.2 detailed explanation of playback-by-time toolbar button operation button operation button operation / mute/audio on / start/stop clipping save clip(s) add default tag add...

  • Page 72

    User manual of dvr6100v-h series dvr 71 play back record files on one or several channels searched out by restricting event type (motion detection). Channel switch is supported. Steps: 1. Enter the playback interface. Menu>playback 2. Click and select to enter the event playback interface. 3. Select...

  • Page 73

    User manual of dvr6100v-h series dvr 72 note: pre-play and post-play can be configured for the playback of event triggered record files. Pre-play: the time you set to play back before the event. For example, when an alarm triggered the recording at 10:00, if you set the pre-play time as 5 seconds, t...

  • Page 74

    User manual of dvr6100v-h series dvr 73 figure 6.12 toolbar of playback by event table 6.3 detailed explanation of playback-by-event interface button operation button operation button operation / mute/audio on / start/stop clipping save clip(s) add default tag add customized tag tag management digit...

  • Page 75

    User manual of dvr6100v-h series dvr 74 click button to add default tag. Click button to add customized tag and input tag name. Note: max. 64 tags can be added to a single video file. 2. Tag management. Click button to check, edit and delete tag(s). Figure 6.14 tag management interface steps: 1. Ent...

  • Page 76

    User manual of dvr6100v-h series dvr 75 figure 6.16 interface of playback by tag figure 6.17 toolbar of playback by tag table 6.4 detailed explanation of playback-by-tag toolbar button operation button operation button operation / mute/audio on / start/stop clipping save clip(s) add default tag add ...

  • Page 77

    User manual of dvr6100v-h series dvr 76 the smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video with motion, mark it with green color and play it in the normal speed while the video wit...

  • Page 78

    User manual of dvr6100v-h series dvr 77 figure 6.19 log search interface 2. Specify the start time and end time for search. 3. Select the major type of the log from the drop-down list. 4 major types are selectable: alarm, exception, operation and information. 4. Check the checkboxes to select the mi...

  • Page 79

    User manual of dvr6100v-h series dvr 78 figure 6.21 interface of playback by log 6.1.7 playing back external files purpose: the record files stored in the external storage devices, e.G., usb flash drives, usb hdds, can be searched and played back. Before you start: insert the external device(s) with...

  • Page 80: 6.2.2 Smart Search

    User manual of dvr6100v-h series dvr 79 6.2 auxiliary functions of playback 6.2.1 playing back frame by frame purpose: play video files frame by frame, in order to check image details of the video when abnormal events happen. Steps: • using a mouse: go to playback interface. If you choose playback o...

  • Page 81

    User manual of dvr6100v-h series dvr 80 toolbar appears at the bottom of the screen. Figure 6.24 smart search toolbar 3. Click-and-drag the mouse to draw area(s) for smart search. You can click the icon to set the full screen as target searching area. Note: multi-area and full-screen searching modes...

  • Page 82: 6.2.3 Digital Zoom

    User manual of dvr6100v-h series dvr 81 6.2.3 digital zoom steps: 1. Enter the playback interface and start the playback. For details, see chapter 6.1. 2. Click the icon on the playback control toolbar to enter digital zoom mode. 3. Click-and-drag the mouse to draw a red rectangle on the window in t...

  • Page 83

    User manual of dvr6100v-h series dvr 82 figure 6.28 4-ch synchronous playback interface 3. Click the icon on the playback control toolbar, and the record files will be played back reversely..

  • Page 84: C H A P T E R 7

    User manual of dvr6100v-h series dvr 83 c h a p t e r 7 backup.

  • Page 85

    User manual of dvr6100v-h series dvr 84 7.1 backing up record files before you start: please insert the backup device(s) into the device. 7.1.1 backing up by normal video search purpose: the record files can be backup to various devices, such as usb devices (usb flash drives, usb hdds, usb writer), ...

  • Page 86

    User manual of dvr6100v-h series dvr 85 note: if the inserted device is not recognized: • click the refresh button. • reconnect device. • check for compatibility from vendor. You can also format usb flash drives or usb hdds via the device. Usb writer, sata writer and esata hdd cannot be formatted. F...

  • Page 87

    User manual of dvr6100v-h series dvr 86 figure 7.6 checkup of export result using usb flash drive 7.1.2 backing up by event search purpose: back up event-related record files using usb devices (usb flash drives, usb hdds, usb writer), sata writer. Quick backup and normal backup are supported. Steps:...

  • Page 88

    User manual of dvr6100v-h series dvr 87 figure 7.8 result of event search 6. Select record files to export. You can use the following two ways to enter the export interface. Select motion detection event (s) from the list and click quick export button to enter the export interface, as shown in figur...

  • Page 89

    User manual of dvr6100v-h series dvr 88 figure 7.10 export by normal video search using usb flash drive 8. Click export button and select to export the video and log files or the player to the backup device. Click ok to confirm. Figure 7.11 export selection stay in the exporting interface until all ...

  • Page 90

    User manual of dvr6100v-h series dvr 89 figure 7.13 checkup of event export result using usb flash drive 7.1.3 backing up video clips purpose: you may also select video clips to export directly during playback, using usb devices (usb flash drives, usb hdds, usb writer), sata writer. Steps: 1. Enter ...

  • Page 91

    User manual of dvr6100v-h series dvr 90 figure 7.15 export video clips using usb flash drive 5. Click export button and select to export the video and log files or the player to the backup device. Click ok to confirm. Figure 7.16 export selection stay in the exporting interface until all record file...

  • Page 92

    User manual of dvr6100v-h series dvr 91 figure 7.18 checkup of video clips export result using usb flash drive.

  • Page 93

    User manual of dvr6100v-h series dvr 92 7.2 managing backup devices management of usb flash drive, usb hdd. Steps: 1. Enter the export interface of backup device. For details, see chapter 7.1-7.2. Figure 7.19 management of usb flash drives, usb hdds figure 7.20 management of usb writers and dvd-r/w ...

  • Page 94

    User manual of dvr6100v-h series dvr 93.

  • Page 95: C H A P T E R 8

    User manual of dvr6100v-h series dvr 94 c h a p t e r 8 alarm settings.

  • Page 96

    User manual of dvr6100v-h series dvr 95 8.1 setting motion detection steps: 1. Enter motion detection interface and choose a camera you want to set motion detection. Menu> camera> motion figure 8.1 motion detection setup interface 2. Set motion detection area and sensitivity. 1) check the checkbox o...

  • Page 97

    User manual of dvr6100v-h series dvr 96 2) choose one day of a week and up to eight time periods can be set within each day. 3) click apply to save the arming settings of the selected day. 4) repeat the above steps to set up arming schedule of other days of a week. You can also use copy button to co...

  • Page 98: 8.3 Detecting Video Loss

    User manual of dvr6100v-h series dvr 97 8.3 detecting video loss purpose: detect video loss of a channel and take alarm response action(s). Steps: 1. Enter video loss interface of camera management. Menu> camera> video loss figure 8.7 video loss setup interface 2. Select a channel you want to detect...

  • Page 99

    User manual of dvr6100v-h series dvr 98 8.4 detecting video tampering purpose: trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter video tampering interface of camera management. Menu> camera> video tampering detection figure 8.9 video tampering setup interface ...

  • Page 100: 8.5 Handling Exceptions

    User manual of dvr6100v-h series dvr 99 8.5 handling exceptions purpose: exception settings refer to the handling method of various exceptions, e.G., • hdd full: the hdd is full. • hdd error: writing hdd error, unformatted hdd, etc. • network disconnected: disconnected network cable. • ip conflicted...

  • Page 101

    User manual of dvr6100v-h series dvr 100 8.6 setting alarm response actions purpose: the alarm response actions will be activated when an exception occurs, including full screen monitoring, audible warning, notify surveillance center, and send email. Full screen monitoring when an alarm event (motio...

  • Page 102: C H A P T E R 9

    User manual of dvr6100v-h series dvr 101 c h a p t e r 9 network settings.

  • Page 103

    User manual of dvr6100v-h series dvr 102 9.1 configuring general settings purpose: network settings must be properly configured before you operate device over network. Steps enter the network settings interface. Menu > configuration > network 1. Select the general tab. Figure 9.1 general network set...

  • Page 104: 9.2.2 Configuring Ddns

    User manual of dvr6100v-h series dvr 103 figure 9.2 pppoe settings interface 3. Check the pppoe checkbox to enable this feature. 4. Enter user name and password for pppoe access. Note: the user name and password should be assigned by your isp. Figure 9.3 pppoe settings interface 5. Click the apply b...

  • Page 105

    User manual of dvr6100v-h series dvr 104 figure 9.5 ipserver settings interface • dyndns: 1) enter server address for dyndns (e.G. Members.Dyndns.Org). 2) in the device domain name text field, enter the domain obtained from the dyndns website. 3) enter the user name and password registered in the dy...

  • Page 106

    User manual of dvr6100v-h series dvr 105 other fields are read only. 1) enter the server address of the hiddns server: www.Hiddns.Com. 2) enter the device domain name. You can register the alias of the device domain name in the hiddns server first and then enter the alias to the device domain name i...

  • Page 107: 9.2.4 Configuring Snmp

    User manual of dvr6100v-h series dvr 106 and the alias must be started with letters of the lower-case english alphabet. 5. Click the apply button to save and exit the interface. 9.2.3 configuring ntp server purpose: a network time protocol (ntp) server can be configured on your device to ensure the ...

  • Page 108: 9.2.5 Configuring Nat

    User manual of dvr6100v-h series dvr 107 figure 9.13 snmp settings interface 3. Check the snmp checkbox to enable this feature. 4. Configure the snmp settings. Figure 9.14 configure snmp settings 5. Click the apply button to save and exit the interface. Note: before setting the snmp, please download...

  • Page 109

    User manual of dvr6100v-h series dvr 108 figure 9.15 upnp™ settings interface 3. Check checkbox to enable upnp™. 4. Select the mapped type to auto or manual. Task1: auto if you select auto, the port mapping items are read-only, and the external ports are set by the router automatically. Steps: 1) cl...

  • Page 110

    User manual of dvr6100v-h series dvr 109 figure 9.17 external port settings dialog box 2) click apply to save the settings. 3) you can click refresh to get the latest status of the port mapping. Figure 9.18 upnp™ settings finished-manual manual mapping if your router does not support the upnp tm fun...

  • Page 111

    User manual of dvr6100v-h series dvr 110 figure 9.19 external port settings dialog box 5. Click ok to save the setting for the current port and return to the upper-level menu. 6. Click apply button to save the settings. 7. Enter the virtual server setting page of router. Input the internal port valu...

  • Page 112: 9.2.8 Configuring Rtsp

    User manual of dvr6100v-h series dvr 111 9.2.7 configuring multicast purpose: the multicast can be configured to realize live view for more than the maximum number of cameras through network. A multicast address spans the class-d ip range of 224.0.0.0 to 239.255.255.255. It is recommended to use the...

  • Page 113

    User manual of dvr6100v-h series dvr 112 menu > configuration > network 2. Select the more settings tab to enter the more settings interface. 3. Enter new server port and http port. Figure 9.24 host/others settings menu 4. Enter the server port and http port in the text fields. The default server po...

  • Page 114: 9.2.11 Configuring Email

    User manual of dvr6100v-h series dvr 113 figure 9.26 create self- signed certificate 2) enter the country, host name/ip, validity and other information. 3) click ok to save the settings. Option 2: create the authorized certificate 1) click the create button to create the certificate request. 2) down...

  • Page 115

    User manual of dvr6100v-h series dvr 114 figure 9.28 network settings interface 3. Clickthe apply button to save the settings. 4. Select the email tab to enter the email settings interface. 5. Configure the following email settings: enable server authentication (optional): check the checkbox to enab...

  • Page 116

    User manual of dvr6100v-h series dvr 115 message box will pop up..

  • Page 117

    User manual of dvr6100v-h series dvr 116 9.3 checking network traffic purpose: you can check the network traffic to obtain real-time information of device such as linking status, mtu, sending/receiving rate, etc. Steps: 1. Enter the network traffic interface. Menu > maintenance > net detect figure 9...

  • Page 118: 9.4 Network Detection

    User manual of dvr6100v-h series dvr 117 9.4 network detection purpose: you can obtain network connecting status of device through the network detection function, including network delay, packet loss, etc. 9.4.1 testing network delay and packet loss steps: 1. Enter the network traffic interface. Men...

  • Page 119

    User manual of dvr6100v-h series dvr 118 to detect the backup device, please check whether it is compatible with the device. You can format the backup device if the format is incorrect. Figure 9.33 export network packet 4. Click the export button to start exporting. 5. After the exporting is complet...

  • Page 120

    User manual of dvr6100v-h series dvr 119 figure 9.35 checking network status if the network is normal the following message box pops out. Figure 9.36 network status checking result if the message box pops out with other information instead of this one, you can click network button to show the quick ...

  • Page 121

    User manual of dvr6100v-h series dvr 120 9.4.4 checking network statistics purpose: you can check the network statistics to obtain the real-time information of the device. Steps: 1. Enter the network statistics interface. Menu > maintenance> net detect 2. Click the network stat. Tab to enter the net...

  • Page 122: C H A P T E R 1 0

    User manual of dvr6100v-h series dvr 121 c h a p t e r 1 0 hdd management.

  • Page 123: 10.1 Initializing Hdds

    User manual of dvr6100v-h series dvr 122 10.1 initializing hdds purpose: a newly installed hard disk drive (hdd) must be initialized before it can be used with your device. Steps: 1. Enter the hdd information interface. Menu > hdd>general figure 10.1 hdd information interface 2. Select the hdd to be...

  • Page 124: 10.2 Managing Network Hdd

    User manual of dvr6100v-h series dvr 123 10.2 managing network hdd purpose: you can add the allocated nas or disk of ip san to device, and use it as network hdd. Steps: 1. Enter the hdd information interface. Menu > hdd > general figure 10.4 hdd information interface 2. Click the add button to enter...

  • Page 125

    User manual of dvr6100v-h series dvr 124 figure 10.6 add nas disk • add ip san: 1) enter the nethdd ip address in the text field. 2) click the search button to the available ip san disks. 3) select the ip san disk from the list shown below. 4) click the ok button to add the selected ip san disk. Not...

  • Page 126: 10.3 Managing Hdd Group

    User manual of dvr6100v-h series dvr 125 10.3 managing hdd group 10.3.1 setting hdd groups purpose: multiple hdds can be managed in groups. Video from specified channels can be recorded onto a particular hdd group through hdd settings. Steps: 1. Enter the storage mode interface. Menu > hdd > advance...

  • Page 127: 10.3.2 Setting Hdd Property

    User manual of dvr6100v-h series dvr 126 figure 10.11 local hdd settings interface 7. Select the group number for the current hdd. Note: the default group no. For each hdd is 1. 8. Click the ok button to confirm the settings. Figure 10.12 confirm hdd group settings 9. In the pop-up attention box, cl...

  • Page 128

    User manual of dvr6100v-h series dvr 127 figure 10.13 set hdd property 3. Set the hdd property to r/w, read-only or redundancy. 4. Click the ok button to save the settings and exit the interface. 5. In the hdd information menu, the hdd property will be displayed in the list. Note: at least 2 disks (...

  • Page 129: 10.4 Configuring Quota Mode

    User manual of dvr6100v-h series dvr 128 10.4 configuring quota mode purpose each camera can be configured with allocated quota for the storage of recorded files. Steps 1. Enter the storage mode interface. Menu > hdd > advanced 2. Set the mode to quota. Note: the device must be rebooted to enable th...

  • Page 130: 10.5 Checking Hdd Status

    User manual of dvr6100v-h series dvr 129 10.5 checking hdd status purpose: you may check the status of the installed hdds on device so as to take immediate check and maintenance in case of hdd failure. Checking hdd status in hdd information interface steps: 1. Enter the hdd information interface. Me...

  • Page 131

    User manual of dvr6100v-h series dvr 130 10.6 checking s.M.A.R.T. Information purpose: the s.M.A.R.T. (self-monitoring, analysis and reporting technology) is a monitoring system for hdd to detect and report on various indicators of reliability in the hopes of anticipating failures. Steps: 1. Enter t...

  • Page 132: 10.7 Detecting Bad Sector

    User manual of dvr6100v-h series dvr 131 10.7 detecting bad sector purpose: the bad sectors of a hdd may cause the system to slow down when reading or writing data. You can detect the bad sectors of the hdd and thus to take immediate measures to repair it. Steps: 1. Enter the bad sector detection in...

  • Page 133

    User manual of dvr6100v-h series dvr 132 10.8 configuring hdd error alarms purpose: you can configure the hdd error alarms when the hdd status is uninitialized or abnormal. Steps: 1. Enter the exception interface. Menu > configuration > exceptions 2. Select the exception type to hdd error from the d...

  • Page 134: C H A P T E R 11

    User manual of dvr6100v-h series dvr 133 c h a p t e r 11 camera settings.

  • Page 135

    User manual of dvr6100v-h series dvr 134 11.1 configuring osd settings purpose: you can configure the osd (on-screen display) settings for the camera, including date /time, camera name, etc. Steps: 1. Enter the osd configuration interface. Menu > camera > osd 2. Select the camera to configure osd se...

  • Page 136

    User manual of dvr6100v-h series dvr 135 steps: 1. Enter the privacy mask settings interface. Menu > camera > privacy mask 2. Select the camera to set privacy mask. 3. Click the checkbox of enable privacy mask to enable this feature. Figure 11.3 privacy mask settings interface 4. Use the mouse to dr...

  • Page 137

    User manual of dvr6100v-h series dvr 136 3. Set the period of a day for configuring independent image parameters so as to satisfy different light conditions, e.G., daylight and night time. Two periods can be configured. When you have configured period 1, the period 2 is remained as the other time. F...

  • Page 138

    User manual of dvr6100v-h series dvr 137 11.4 configuring video quality diagnostics purpose: when the video quality is diagnosed abnormal (e.G., blurred image, abnormal brightness and color cast), the alarm will be triggered and linked with the configured response actions steps: 1. Enter the video q...

  • Page 139

    User manual of dvr6100v-h series dvr 138 figure 11.8 image settings interface 7. Click apply to save the settings. You can click copy to copy the settings to other analog cameras; or click restore to restore the values of the blurred image, abnormal brightness and color cast to the default settings..

  • Page 140: C H A P T E R 1 2

    User manual of dvr6100v-h series dvr 139 c h a p t e r 1 2 device management and maintenance.

  • Page 141

    User manual of dvr6100v-h series dvr 140 12.1 viewing system information 12.1.1 viewing device information steps: 1. Enter the system information interface. Menu > maintenance > system info 2. Click the device info tab to enter the device information menu to view the device name, model, serial no. ,...

  • Page 142

    User manual of dvr6100v-h series dvr 141 1. Enter the system information interface. Menu > maintenance > system info 2. Click the record tab to enter the record information menu to view the recording status and encoding parameters of each camera. Figure 12.3 record information interface 12.1.4 viewi...

  • Page 143

    User manual of dvr6100v-h series dvr 142 12.1.5 viewing hdd information steps: 1. Enter the system information interface. Menu > maintenance > system info 2. Click the hdd tab to enter the hdd information menu to view the hdd status, free space, property, etc. Figure 12.5 hdd information interface.

  • Page 144

    User manual of dvr6100v-h series dvr 143 12.2 searching & exporting log files purpose: the operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time. Steps: 1. Enter the log search interface. Menu > maintenance > log informatio...

  • Page 145

    User manual of dvr6100v-h series dvr 144 figure 12.7 log search results 5. You can click the button of each log or double click it to view its detailed information. And you can also click the button to view the related video files if available. Figure 12.8 log details 6. If you want to export the lo...

  • Page 146

    User manual of dvr6100v-h series dvr 145 figure 12.10 export log files 7. Select the backup device from the dropdown list of device name. 8. Click the export to export the log files to the selected backup device. You can click the new folder button to create new folder in the backup device, or click...

  • Page 147

    User manual of dvr6100v-h series dvr 146 figure 12.11 import/export config file 2. Click the export button to export configuration files to the selected local backup device. 3. To import a configuration file, select the file from the selected backup device and click the import button. After the impo...

  • Page 148: 12.4 Upgrading System

    User manual of dvr6100v-h series dvr 147 12.4 upgrading system purpose: the firmware on your device can be upgraded by local backup device or remote ftp server. 12.4.1 upgrading by local backup device steps: 1. Connect your device with a local backup device where the update firmware file is located....

  • Page 149

    User manual of dvr6100v-h series dvr 148 12.5 restoring default settings steps: 1. Enter the default interface. Menu > maintenance > default figure 12.14 restore factory default 2. Click the ok button to restore the default settings. Note: except the network parameters (including ip address, subnet ...

  • Page 150: C H A P T E R 1 3

    User manual of dvr6100v-h series dvr 149 c h a p t e r 1 3 others.

  • Page 151

    User manual of dvr6100v-h series dvr 150 13.1 configuring general settings purpose: you can configure the bnc output standard, vga/hdmi output resolution, mouse pointer speed, etc. Steps: 1. Enter the general settings interface. Menu > configuration > general 2. Select the general tab. Figure 13.1 g...

  • Page 152

    User manual of dvr6100v-h series dvr 151 13.2 configuring dst settings steps: 1. Enter the general settings interface. Menu >configuration>general 2. Choose dst settings tab. Figure 13.2 dst settings interface you can check the checkbox before the auto dst adjustment item. Or you can manually check ...

  • Page 153

    User manual of dvr6100v-h series dvr 152 13.4 configuring more settings steps: 1. Enter the general settings interface. Menu > configuration > general 2. Click the more settings tab to enter the more settings interface. Figure 13.3 more settings interface 3. Configure the following settings: • devic...

  • Page 154: 13.5.1 Adding A User

    User manual of dvr6100v-h series dvr 153 13.5 managing user accounts purpose: there is a default account in the device: administrator. The administrator user name is admin and the password is 12345. The administrator has the permission to add and delete user and configure user parameters. 13.5.1 add...

  • Page 155

    User manual of dvr6100v-h series dvr 154 figure 13.6 added user listed in user management interface 5. Select the user from the list and then click the button to enter the permission settings interface. Figure 13.7 user permission settings interface note: local camera management is supported by hdvr...

  • Page 156: 13.5.2 Deleting A User

    User manual of dvr6100v-h series dvr 155 camera configuration • remote live view: remotely viewing live video of the selected camera (s). • local manual operation: locally starting/stopping manual recording, picture capturing and alarm output of the selected camera (s). • remote manual operation: re...

  • Page 157

    User manual of dvr6100v-h series dvr 156 3. Click the icon to enter the edit user interface. Figure 13.10 edit user interface 4. Edit the user information, including user name, password, level and mac address. 5. Click the ok button to save the settings and exit the menu. 13.5.4 changing password of...

  • Page 158

    User manual of dvr6100v-h series dvr 157 figure 13.12 change password 3. Enter the old password, check checkbox, enter new password and confirm password on the menu. 4. Click ok to save the settings and exit the menu..

  • Page 159: C H A P T E R 1 4

    User manual of dvr6100v-h series dvr 158 c h a p t e r 1 4 glossary • dual stream: dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the device, with the main stream having a maximu...

  • Page 160: Faq

    User manual of dvr6100v-h series dvr 159 faq • why does my device make a beeping sound after booting? The possible reasons for the warning beep on the device are as follows: a) there is no hdd installed in the device. B) the hdd is not initialized. C) hdd error to cancel the beeping sound and use th...

  • Page 161

    User manual of dvr6100v-h series dvr 160 0300001040319.