Saftronics PC10 Manual - Warning!
WARNING!
Saftronics manufactures component parts that can be used in a wide
variety of industrial applications. The selection and application of
Saftronics products remains the responsibility of the equipment de-
signer or end user.
Saftronics accepts no responsibility for how it’s
products may be incorporated into the final design.
Under no circumstances should any
Saftronics product be incorpo-
rated into any product or design as the exclusive or sole safety con-
trol. Without exception, all controls should be designed to dynami-
cally fault detect and fail safe under all circumstances. All products
designed to incorporate a component part manufactured by
Saftronics, must be supplied to the end user with appropriate warn-
ings and instructions as to the safe use and operation. Any warnings
provided by
Saftronics must be passed through to the end user.
Saftronics offers an express warranty only as to the quality of it’s
products to conform to the catalog specifications. NO OTHER WAR-
RANTY, EXPRESS OR IMPLIED, IS OFFERED.
Saftronics assumes
no liability for any personal injury, property damage, losses or claims,
arising out of the mis-application of it’s products.
PAGE 6
PAGE 3
Description
The 100-0159-01 RELAY OUTPUT CARD, provides (2) relay form C outputs for
the PC10 Inverter. It has “hard pins” to assemble directly to the PC10’s control
terminals and screw type output terminals.
Specifications
Output relays - Form C contacts: 120 VAC @ 0.5A / 24 VDC @ 1.0A
Installation
Turn off all power to the equipment being worked on before attempting any
installation. Referring to the figure on page 5 and in accordance with the PC10
instruction manual, remove the protective cover. Insert the “hard pins” into
terminals Y2, CME, and CM of the PC10’s control terminals and tighten. Connect
the pig-tail leads to terminals Y1 and P24 and replace the cover. This completes
the installation.
After applying power, parameters E20 for (K1) and E21 for (K2) are to be
programmed in accordance with the table on page 4. Refer to the PC10 manual
for further details.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor