Saga The Knights SAG0201SB User Manual - page 4
INSTALLING & REMOVING THE GRILLE
The grille is held by pins. To remove the grille, pull gently around the edge away from the speaker. To re-install, align the grille
pins with the cups in the speaker and push into place.
CARE & CLEANING
You can clean your soundbar using a soft, lint-free cloth, slightly moistened with plain water. Do not use any other cleaning agents
or chemicals. Be careful not to get any water on the driver cones or tweeter dome. You can clean the grille with a quick pass from
a vacuum cleaner with a brush attachment. Avoid placing your speaker in direct sunlight or near a source of heat that may, over
time, damage the finish.
4
SPECIFICATIONS
MAINTENANCE
System Design:
High-density MDF, 3-channel, 2-way, 7-element, vented enclosure. Ideal for home theater front
left-center-right, or rear surround left-center-right applications
Tweeters:
Three 1˝ (25 mm) ultra-wide dispersion metallic anodized domes
Woofers:
Four 4˝ (102 mm) injection-molded metallic anodized cones w/ rubber surrounds
Frequency Response:
70 Hz - 23,000 Hz
Impedance:
8ohms nominal (per channel)
Recommended Amplifier:
60 to 135 watts (per channel)
Sensitivity:
88dB@1W/1M
Dimensions:
39 3/4˝Wx5˝ H x 41/8˝D (1,010 mm W x 127 mm H x 105 mm D)
Weight:
19 lbs. (8.6 kg.)