Sage 7938 Operating Instructions Manual - Cawr227
Adjusting the Temperature Display Units (°F or °C)
The warmer is capable of displaying temperature in units of Celsius or Fahrenheit.
1.
From the default temperature display screen, press the °C key located below the display if Fahrenheit is displayed and Celsius is desired. If
Celsius is displayed and Fahrenheit is desired, press the °F key located below the display.
Using the Audible Message Feature
The warmer has the ability to audibly announce a fully customizable, 10-second, user-defined message when the door to the unit is opened. This
feature allows facilities to tailor messages to highlight specific areas of compliance and give users an audible reminder or message (e.g., “Do not
flush cloths,” “Please restock the warmer with fresh product,” or “Only one bath per patient.”)
1.
From the default temperature display screen, press the MENU key located below the display.
2.
Using the UP/DOWN arrow keys located to the right of the display, highlight VOICE MESSAGE and press the SELECT key below the display.
3.
The UP/DOWN arrow keys will toggle the voice message on or off. Select the OPTIONS key located below the display to record a message.
4.
When prompted, enter the following key sequence: UP ARROW, DOWN ARROW, UP ARROW.
5.
From the Voice Message Options screen, press the RECORD key located below the display.
6.
When you are ready to record the user-defined message, press the START key located below the display and speak clearly into the microphone
located to the bottom-right of the display.
7.
When the voice message is complete, press the STOP key located below the display.
8.
The UP/DOWN arrow keys can be used to review the message. If satisfied with the message, press the SAVE/EXIT key located below the
screen and you will be returned to the default temperature display screen. If you would like to re-record the message, press the ERASE &
RETRY key located below the display and repeat steps 6 and 7.
Using the Inventory Tracking Feature
The warmer has the ability to track the number of packages used over a period of time. The inventory tracking feature can display the amount of
packages removed from the warmer for a specific month, or over the previous twelve-month period.
1.
From the default temperature display screen, press the MENU key located below the display.
2.
Using the UP/DOWN arrow keys located to the right of the display, highlight CHECK INVENTORY and press the SELECT key below
the display.
3.
The UP/DOWN arrow keys located to the right of the display can be used to select the month that you wish to be displayed. The display will
initially display the current month’s usage and the usage over the previous twelve months. The total displayed is cumulative.
4.
When done, press the EXIT key located below the display to return to the temperature display screen.
FreeRTOS Software
This device uses FreeRTOS, version 5.1.1, which is licensed under a modified GPL. For a copy of the FreeRTOS source code, or details of the
modified GPL, please visit www.FreeRTOS.org. You may also obtain a copy of version 5.1.1 of the FreeRTOS source code from Sage Products
Customer Service by emailing customerservice@sageproducts.com or calling 1-800-323-2220.