1 sage water dispenser instruction manual sage water coolers please read this manual carefully before using! Contents 1. Brief introduction of the machine (1) brief introduction of the appearance (2) touch panel introduction 2. Technical parameter 3. Installation (1) overview (2) water supply connec...
2 1. Brief introduction of the machine (1) brief introduction of the appearance 1. Touch panel 9. Condenser 2. Cover of the drip tray 10. Heating switch 3. Drip tray 11. Water inlet whole 4. 2.8”tft lcd screen 12. Switch panel 5. Faucet 13. Fan 6. Panel 14. Fuse 7. Drain tray 15. Power switch 8. Dec...
3 7 return key and child lock button 8. Mixed water keys 9. Logo 10. Clock 11. Automatic switcher icon 12. Power-saving mode icon 13. Cold water key and select key 14. Cooling and cold water temp icon 15. Set key and enter key 16. One cup of water key and select key 17. Water outlet indicator light ...
4 2. Technical parameter (1). Machine parameter (2).Theoretical sketch: 3.Installation (1). Overview please install the machine in a place of cool, ventilation and soundness, but away from hot objects. Keep the unit 10cm(4") away from the wall and leave enough space for both sides of the unit. In or...
5 (picture 3) (picture 4) (picture5) 4. Operation (1) initially connect with electric supply once connected to power, the screen display will appear, means it is testing the unit. Interface should appear as shown below. After entering into initial adding water interface, follow the instructions to a...
6 a. Hot water ① when setting with the child lock, first touch ，then touch . You can get hot water after 3 seconds. Touch any button to stop the water flow. ② when setting the child lock prevention，first touch ，then touch for hot water flow. Touch any key to stop the water。 ◎ at this time, turn the ...
7 a. Enter the setting interface ① press to enter the setting interface and follow to the interface prompts. Setting interface includes temperature settings, water settings, time and date settings, energy saving mode, child lock settings, filters and uv change settings, language settings, ring setti...
8 d. Time settings (year - month - day) select calendar settings, enter into the time adjustment interface and follow the prompts to set the parameters, as follows: then press to save parameters e. Energy saving mode select energy-saving mode, enter into power saving mode adjustment interface and fo...
9 f. Child lock settings select the child lock setting and enter into the child lock adjustment interface. Follow the prompts to set parameters, as follows: g. Filter / uv maintenance settings select filter / uv maintenance setting item, enter into the filter / uv maintenance adjustment interface, a...
10 5. Maintenance and replacement of machine parts (1). Replacement a. Filter maintenance filter should be replaced approximately every 6 months (about 2,000 liters of water), when the filter is reaches its lifetime, the unit will remind you to replace the filter. Remove the decoration tray open-rot...
11 when finished replacing the uv lamp, please enter into setting mode – filter / uv-uv-replace maintenance of uv-recognized. (2) cl eanin g panels clean unit wit h a s oft cl oth dipped in warm wat er or soap wat er and other neutral det ergent s . Touch panel, t ra y can be cl eaned usi ng a dry s...
12 pleas e note: if th e unit is connected with el ectri ci ty, do not get the back of th e machine wet. 7. Troubleshooting problems can be quickly determined by the fault type, and can help you or service personnel to resolve problems and minimize the workload of service. If the machine is not work...
