Sagem 2604 Quick Installation Manual - Sagem F@st™ 2604/2644
SAGEM F@st™ 2604/2644
ifatestdisplaysa«Fail»status,clickon«help»thenthe«rerun
diagnostictests»buttonatthebottomofthe«help»pagetomakesurethatthetestwas
suitable.iftheteststilldisplays«Fail»,youmustfollowtherepairproceduredisplayedon
thispage.
ahypertextlink(help)enablestheusertoaccesscontextualhelp.thishelpprovidesex-
planationsaboutthestatusoftheconnection(
pASSgreen,DoWnorangeandFAILred)
andprovidestheappropriaterepairprocedures.
The result of the tests carried out by your router’s «DSL router» configuration tool is displayed in the
«diagnostics»window.thesetestsrelatetotheconnectionstothelan,yourdslserviceprovider
andyour
InternetServiceprovider(isp).
IMporTAnT
ifyouarehavingtroubleconnectingtotheinternetwerecommendthatyourestartyourrouterorpos-
sibly return to the factory configuration using the procedures described below.
restarting your router
torestartyourrouter,clickonthe«
reboot» button in the top right of your HTTP configuration tool’s
welcomepage.
Returning to the factory configuration
To return to the factory configuration:
in the top left of your HTTP configuration tool’s welcome page select the
Managementheading
thenthe
restore defaultsub-menuintheSettingsmenu.
orpressandholdforabout10secondsonthebuttonmarked«
rEG»onthebackofyourrouter.
Connection status
Status
Colour
Meaning
pass
Green
indicatesthatthetestwascarriedoutcorrectly
doWn
orange
indicatesthataninterface(ethorWi-Fi)wasnotdetected
Fail
red
indicatesthatatestfailedorthatacommandcouldnotbelaun-
ched.
Troubleshooting
13
252987009-A_GIR_2604-2644 (gb).i15 15
22/05/2008 13:35:35