Summary of D23XL
Page 2: Ntroduction
I ntroduction dear customer: thank you for purchasing a sagem dect telephone; we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. You can also find information on the...
Page 3: Ontents
I your telephone 1 unpacking 1 your base d23xl 1 your base d23xp 2 your handset 3 connecting the base 4 handset set-up 5 telephone set turning on and off 5 replacing the batteries 6 getting started 7 making a call 7 direct dialling 7 using the redial key 7 from the directory 7 receiving a call 7 dur...
Page 4: Our Telephone
1 y our telephone unpacking place the box in front of you, make sure it contains the following items: • one base, • one handset, • one battery compartment cover, • one equipped power adapter, • one telephone line cord, • three rechargeable batteries (type nimh 1.2 v 600 mah), • this user guide. Your...
Page 5: Our Telephone
2 y our telephone your base d23xp handset location power indicator light fixed green indicator: powered flashing green indicator: - telephone set on line (slowly flashing), - message in the network mailbox (rapidly flashing) - call during absence (intermittently flashing). Base button pressed briefl...
Page 6: Our Telephone
3 y our telephone your handset with its user-friendly design, you will appreciate how easy it is to hold and its quality during conversations. The navigator key and keys : a rapid selection tool. Display phonebook key ok internal call alphanumeric keypad access to network answer machine messaging (l...
Page 7: Our Telephone
4 y our telephone the visual display of your handset on standby mode connecting the base on the bottom part of the base, click in the telephone jack in its socket (as shown on the drawing) and connect the other end of the lead to the wall telephone socket. Connect one end of the power-supply unit co...
Page 8: Our Telephone
5 y our telephone handset set-up insert the batteries one after the other in compliance with the battery polarity, as shown on the label in the telephone set. Place the cover back on the handset by pushing upwards until it is completely closed. Remove the protective film on the screen, place the han...
Page 9: Our Telephone
6 y our telephone replacing the batteries hold down the c key to turn off the telephone set. Turn it around so that the battery compartment is accessible. Take the handset, key side on your palm and on the battery cover make a pressure downwards. Remove the old batteries, insert the new batteries on...
Page 10: Etting Started
7 g etting started making a call direct dialling enter the number of your contact using the keypad keys. If you enter an invalid digit, press c to erase the incorrect digit. Press the green key on your handset to make the call. To enter the pause mode during dialling, press the key until letter p ap...
Page 11: Mute Mode
8 the icon appears. During communication, you can increase or decrease the audio volume of your handset by pressing the or key on the navigator. Mute mode you can switch to mute mode at any time during your conversation. Your handset microphone will be switched off and the other person will not be a...
Page 12: Etting Started
9 g etting started call log this menu enables you to view the received and the dialled calls list. Viewing the dialled calls from the idle screen, press and hold the keypad key until the last dialled number appears. You can view the 10 last dialled calls by pressing key. You can recall one of the la...
Page 13: Etting Started
10 g etting started managing the speed dial numbers (d23xp) the keypad of your d23xp base can be used to save the telephone numbers you call regularly which you want to access quickly. You can save 9 numbers. Each one is assigned to one of the keys on the numeric keypad on the base (1 to 0). Calling...
Page 14: Enu Structure
11 m enu structure you can navigate through the menus using the and keys. Press the ok key to access a higher menu. Press the c key to return to the previous menu. Directory new edit delete find date-time change name extern call intern call hs set voice box no language melody vol ear volume beeps au...
Page 15: Our Directory
12 y our directory you can store 25 numbers entries in your directory. Each directory entry can contain the name of your contact which can be a maximum of 12 characters long (spaces included), your contact's telephone number up to 25 digits. Viewing the directory on the navigator key , press or unti...
Page 16: Editing An Entry
13 in case of a mistake, press c to erase one character at a time. Once you are done making your changes, press ok. The number input screen appears. Now, enter the name of your contact using the keypad keys. To enter the pause mode during dialling, press the key until letter p appears. In case of a ...
Page 17: All Log
14 c all log this menu enables you to view the received and the dialled calls list. Viewing the dialled calls from the idle screen, press and hold the green key until the last dialled number appears. You can view the 10 last dialled calls by pressing key. You can recall one of the last dialled numbe...
Page 18: Log
15 enter the name of the caller with the keyboard and press ok. The number specified appears to the screen, press ok. Deleting a number from the call log press the key to access to the list of received calls. Use or to select the number you wish to add to the directory. Press ok. The number of calls...
Page 19: Andset Settings
16 h andset settings activating or deactivating the beeps on the navigator key , press or until the hs set screen is displayed, press ok to confirm. Select beeps using or . Press ok. Select the beep type using or . Press ok. Keypad press: the handset beeps when a key is pressed. Battery low: the han...
Page 20: Andset Settings
17 h andset settings setting the ear volume on the navigator key , press or until the hs set screen is displayed, press ok to confirm. Select ear volume using or . Press ok. Press or to increase or decrease the default volume. Once the volume is set, press ok. To exit the menu, press the red key . U...
Page 21: Andset Settings
18 h andset settings modifying the date and time on the navigator key , press or until the hs set screen is displayed, press ok to confirm. Select date-time using or . Press ok. Enter the date in dd/mm format then the time in hh/ mm format and press ok. To exit the menu, press the red key . Modifyin...
Page 22: Ase Settings
19 b ase settings b ase settings modifying the default base ring volume on the navigator key , press or until the base set screen is displayed, press ok to confirm. Select ring volume using or . Press ok. 6 possibilities : • silence : no ringtone • volume : from 1 to 5, press or to increase or decre...
Page 23: Ase Settings
20 b ase settings to exit the menu, press the red key . Modifying the pause duration if you connect your telephone to a private automatic branch exchange, you may need to modify the pause duration in order to use your telephone correctly. Four preprogrammed durations are proposed on the list, the co...
Page 24: Ase Settings
21 b ase settings changing the dialling mode your telephone can dial in the pulse or voice frequency mode. On the navigator key , press or until the base set screen is displayed, press ok to confirm. Select dial mode by pressing the or key. Press ok. Select pulse or tone by pressing the or key. Pres...
Page 25: Egistration
22 r egistration r egistration registering a second handset to a base to register a second handset to a base you must: • put the handset in registration mode, • put the base in registration mode. Once this is done, the registration (mutual recognition of the base and the new handset) will be done au...
Page 26: Egistration
23 r egistration select select base using or . Press ok. Select the base preference (indicated by the icon) using or . Press ok. To exit the menu, press the red key . De-registering a handset this function enables you to de-register a handset from your base. This may be necessary if you have lost a ...
Page 27: Care And Maintenance
24 care and maintenance use a slightly damp cloth to wipe the base and handset as well as charging contacts, do not use a dry cloth as this may cause electrostatic charges. Problems refer to the table presented below in case of an operational malfunction: problems remedies the base indicator light i...
Page 28: Ppendix
25 a ppendix time reset to 12:00 the base power was removed or base was reset : if power was interrupted, the time will also reset or perform default. Please set the time again. Replace or remove the batteries d23 is in strange mode reset all the user-set features to the factory default (refer to pa...
Page 29: Eatures
26 all of this data is provided to you for information purposes only. Sagemcom reserves the right to make any changes without notice. Functions default settings functions default settings handset date/time 01/01 // 00:00 beeps all active name sagem ringer base volume 4 ringer melody ext 1 volume 1 m...
Page 30: Nvironment
27 e nvironment preservation of the environment is an essential concern of sagemcom. The desire of sagemcom is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, ...
Page 31: Arranty
28 terms and conditions for united kingdom only in order to supply the guarantee, you should contact your dealer or sagemcom helpdesk. The proof of purchase will be required. Please make usage of your equipment for the purpose for which it was designed and under normal usage conditions. Sagemcom do ...
Page 32: Arranty
29 w arranty b) exclusions from guarantee sagemcom shall have no liability under the guarantee in respect of: • damage, defects, breakdown or malfunction due to one or more of the following: - failure to properly follow the installation process and instructions for use - an external cause to the equ...
Page 33: Arranty
30 w arranty terms and conditions for other countries if, despite our best efforts, your product presents any defects, you should refer to your retailer and present the proof of purchase that they gave you on the day of purchase. Should any malfunctioning arise, the retailer will advise you what to ...
Page 36: Sagemcom Sas
User manual data subject to change without notice sagemcom sas société par actions simplifiée au capital de 158.291.895 € - 440 294 510 rcs paris 250, route de l'empereur - 92500 rueil-malmaison - france www.Sagemcom.Com.