- DL manuals
- Sagem
- Fax Machine
- LASER PRO 341
- User Manual
Sagem LASER PRO 341 User Manual - page 34
3-4
Setting your machine
Date en cours : 23 avril 2003
\\Sct31nt3\BE31-DOC\DOC 31 - En cours\Travaux en cours\MFL-MFC-MFK\MFL_251 270 819 A_LASER PRO 341 GB_EXPORT\Setting your
machine.fm
'RFXPHQWIHHGW\SH
You may choose the way you want to feed your documents:
• from memory, transmission will take place only after memory storage of the document and dial-
ling. It allows you to get your originals back quickly to free up the machine.
• from the feeder of the sheet-feed scanner (refer to paragraph Document positioning, page 5-1),
transmission will occur after dialling. It allows transmission of larger documents.
To select the way you want to feed your documents:
M 232 OK - SETUP / SEND / MEMORY SEND.
+
Select the option
MEMORY
or
FEEDER
and validate your choice with
OK
.
Remark
:
in feeder mode, the reduced image will not appear on the transmission report.
(FRQRP\SHULRG
This function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost of your
communications.
The economy period, via the telephone network (at off-peak hours), is preset by default from 7.00 pm
to 7.30 am. Nevertheless you may change this time slot.
Modifying the economy period:
M 233 OK - SETUP / SEND / ECO PER.
+
Enter the hours of the new economy period and confirm your selection with the key
OK
.
Using the economy period:
M 32 OK - FAX / ECO TRANS.
+
Enter the call number and confirm with ECO.
or
+
Enter the call number and confirm with
OK
.
%
()25(
5(&(37,21
)D[DQVZHULQJPDFKLQH
The Fax answering machine allows you to keep confidential documents in storage and to avoid printing
them as you receive them.
The "Fax Messages" indicator light lets you know the state of your Fax answering machine:
• Light on: the answering machine is on.
• Blinking: your fax has documents in storage or is in the process of receiving faxes.
• Light off: memory full, the fax cannot receive any more documents.
You can assure document confidentiality by using the 4 digit access code. Once saved, you will require
this access code for:
• printing fax messages in memory,
• activate or deactivate the fax answering machine.
MFL_251 270 819 A_LASER PRO 341 GB.book Page 4 Mercredi, 23. avril 2003 2:55 14
Summary of LASER PRO 341
Page 1
S telecom user manual sagem laser pro 341 e société anonyme à directoire et conseil de surveillance au capital de 36.044.360 - 562 082 909 r.C.S. Paris 27, rue leblanc - 75512 paris cedex 15 - france http://www.Sagem.Com data subject to change without notice user manual ind. A couvertures.Fm page 1 ...
Page 2
C onsumables references toner cartridge: 251 261 253 drum cartridge: 251 261 315 c onsumables characteristics toner cartridge: the standard toner cartridge can produce up to 5,000 pages (when printing on a4 paper with a 5% max. Black and white ratio) or 8,000 pages itu no. 1 in normal mode. The init...
Page 3
Date en cours : 23 april 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\legend.Fm 1. Key: manual line taking, tone monitoring during fax transmission. 2. Key: print the functions list. 3. Key: scanning resolution during transmis- sio...
Page 4
Mfl_251 270 819 a_laser pro 341 gb.Book page 2 mercredi, 23. Avril 2003 2:55 14.
Page 5
-i- op eration setting yo ur machine getting started directory m a intenance safety co ntents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\mfl_251 270 819 a_laser pro 341 gb_tdm.Fm & 217(176 , ...
Page 6
-ii- date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\mfl_251 270 819 a_laser pro 341 gb_tdm.Fm 7hfkqlfdosdudphwhuv 3-6 ' ,5(&725 4-1 &uhdwlqjvxevfulehuvuhfrugv 4-1 $gglqjduhfrug 4-2 &uhdwlqjvxevfulehuvolvwv 4-...
Page 7
-iii- op eration setting yo ur machine getting started directory m a intenance safety co ntents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\mfl_251 270 819 a_laser pro 341 gb_tdm.Fm 2wkhuixqfw...
Page 8
-iv- date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\mfl_251 270 819 a_laser pro 341 gb_tdm.Fm 0lvfhoodqhrxvlqflghqwv 6-23 0dfklqhsdfnlqjdqgwudqvsruwdwlrq 6-23 &kdudfwhulvwlfv 6-25 8qlwfkdudfwhulvwlfv 6-25 6 $...
Page 9
1-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm 167$//$7,21 , 167$//,1* 7(50,1$/ , 167$//$7,21 5(48,5(0(176 a proper location helps to ensure that your printer provides you with the long...
Page 10
1-2 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm • make sure there is no chance of ammonia or other organic gasses being generated in the area. • the grounded power outlet (r...
Page 11
Installation 1-3 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm • do not allow wate...
Page 12
1-4 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm 8 13$&.,1* 7+( 6+,33,1* %2; + take the protection profiles, the packing material and the machine out of the shipping box. Pro...
Page 13
Installation 1-5 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm 8 13$&.,1* 7+( 0$&+...
Page 14
1-6 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm + peel off the three strips of shipping tape from the front of the terminal. + pull out the two pads from the paper feed inle...
Page 15
Installation 1-7 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm + press the paper s...
Page 16
1-8 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm ' (6&5,37,21 control panel original document output stacker printer output stacker printer printer paper feed tray second pap...
Page 17
Installation 1-9 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm , 167$//,1* 7+( 5(0...
Page 18
1-10 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm , 167$//,1* 7+( 35,17(5 287387 67$&.(5 + with both hands, slightly bend the centre part of the stacker upwards in order to i...
Page 19
Installation 1-11 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm , 167$//,1* 7+( 25...
Page 20
1-12 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm + fit the paper tray cover into place. Caution - do not add paper in the paper tray while the machine is printing. Supported...
Page 21
Installation 1-13 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm / 2$',1* 3$3(5 0$1...
Page 22
1-14 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm , 167$//,1* 7+( 6(&21' 3$3(5 &$66(77( 81,7 237,21 remove the second paper cassette unit and tray 2 from their packaging, inc...
Page 23
Installation 1-15 op eration setting yo ur machine getting started directory m a intenance safety contents inst all a tio n date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm remark : be sure t...
Page 24
1-16 installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\installation gb.Fm + make sure the on/off switch is set to 0 (off). 7 (/(3+21( &211(&7,21 + plug end of the telephone line (1) into the connect...
Page 25
2-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm (77,1* 67$57(' 1 $9,*$7,21 0(7+2'6 3 5(6(17$7,21 the navigator gives you access to the menus visible on screen. 7khqdyljdwru this navigato...
Page 26
2-2 getting started date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm 0rylqjzlwklqwkhphqxv 0rylqjzlwklqdgdwdhqwu\ilhog 7r 8vhnh\ 6\peroxvhg enter the main menu. M select the next line in a men...
Page 27
Getting started 2-3 op eration setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm 7khglvsod\vfuhhq the...
Page 28
2-4 getting started date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm + when in the selected menu, use the 5 or 6 navigator arrows to move the cursor in front of the required sub-function. + v...
Page 29
Getting started 2-5 op eration setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm m 29 ok - t echnical...
Page 30
2-6 getting started date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\getting started.Fm main menu 8: a dvanced fct )xqfwlrqv )xqfwlrqghvfulswlrq 3djh m 80 ok - c alibration scanner calibration p. 6-15 m 81 ok -...
Page 31
3-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm (77,1* 0$&+,1( 0 $,1 6(77,1*6 to obtain high quality transmissions (incoming and outgoing), it is recommended that you set-up your ma...
Page 32
3-2 setting your machine date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm 7\shriqhwzrun you may connect your fax to either a pstn or private network such as private automatic branch exch...
Page 33
Setting your machine 3-3 op eration se tting y o ur mac h ine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm /rfdos...
Page 34
3-4 setting your machine date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm 'rfxphqwihhgw\sh you may choose the way you want to feed your documents: • from memory, transmission will take p...
Page 35
Setting your machine 3-5 op eration se tting y o ur mac h ine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm 6dylqj...
Page 36
3-6 setting your machine date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm once the relay is activated by your fax and as soon as the document is received by the remote fax, the document ...
Page 37
Setting your machine 3-7 op eration se tting y o ur mac h ine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm 3 - tx...
Page 38
3-8 setting your machine date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\setting your machine.Fm mfl_251 270 819 a_laser pro 341 gb.Book page 8 mercredi, 23. Avril 2003 2:55 14.
Page 39
4-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm ,5(&725 your fax lets you create a directory by memorising subscriber records and subscriber lists. • your machine can store up to 250 subscr...
Page 40
4-2 directory date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm $ '',1* $ 5(&25' m 11 ok - directory / add name + your fax has just created a new record, fill in it by first entering your subscri...
Page 41
Directory 4-3 op eration setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm $ '',1* $ /,67 to add a list:...
Page 42
4-4 directory date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm $ '',1* 25 '(/(7,1* $ 180%(5 )520 7+( /,67 m 13 ok - directory / modify + select the subscriber list (l) by means of the 6 or 5 key...
Page 43
Directory 4-5 op eration setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm ' (/(7,1* $ 5(&25' 25 $ /,67 ...
Page 44
4-6 directory date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\directory gb.Fm mfl_251 270 819 a_laser pro 341 gb.Book page 6 mercredi, 23. Avril 2003 2:55 14.
Page 45
5-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 3(5$7,21 6 (1',1* ' 2&80(17 326,7,21,1* 6fdqqhu caution - if you forget to position the document to be transmitted, the addressee will receiv...
Page 46
5-2 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm & +226,1* 7+( 5(62/87,21 &2175$67 5hvroxwlrq you have 4 modes for document transmission. The mode choice depends on the type of doc...
Page 47
Operation 5-3 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm or + press key then press the ...
Page 48
5-4 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 7 5$160,66,21 29(5 7+( 3 8%/,& 6 :,7&+(' 7 (/(3+21( 1 (7:25. 3671 ,pphgldwhwudqvplvvlrq + position the document (refer to paragraph...
Page 49
Operation 5-5 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 7udqvplvvlrqzlwkdxwruhgldo thi...
Page 50
5-6 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm - scheduled transmission time (fax) - operation type regarding the document: transmission from memory, delayed transmission, deposi...
Page 51
Operation 5-7 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm & $1&(//,1* $ 75$160,66,21 ,1 ...
Page 52
5-8 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 6rsklvwlfdwhgfrs\ + position the document face down (refer to paragraph document positioning, page 5-1) + press key + enter the des...
Page 53
Operation 5-9 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm to access to the settings: m 8...
Page 54
5-10 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm /xplqrvlw\ + set the desired luminosity with keys 5 or 6 + confirm your setting by pressing key ok 0dujlqv if you want to shift th...
Page 55
Operation 5-11 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 2 7+(5 )81&7,216 / 2*6 the in...
Page 56
5-12 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 3 5,17,1* 7+( 0$&+,1( 6(77,1*6 at any moment, you may print the list of your fax’s parameter settings to control any changes possi...
Page 57
Operation 5-13 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm & 2817(56 at any time, you ma...
Page 58
5-14 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm + choose the type, according to the table below: + confirm deposit by pressing the ok key 3roolqjdghsrvlwhggrfxphqw m 33 ok - fax ...
Page 59
Operation 5-15 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm (qwhulqjwkhorfnlqjfrgh the op...
Page 60
5-16 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 0 $,/ %2; 0%; )$; there are 32 mailboxes (mbx), enabling you to transmit documents in complete confidence using an access code (na...
Page 61
Operation 5-17 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 0rgli\lqjwkhihdwxuhvrid0%; m ...
Page 62
5-18 operation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\operation gb.Fm 0%; ghsrvlwlqduhprwhid[ + insert the document in the fax machine’s feeder + select m 35 ok - fax / mbx sending and confirm with ok...
Page 63
6-1 date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm $,17(1$1&( 0 $,17(1$1&( * (1(5$/ to ensure the best operating conditions for your fax, it is recommended that you regularly clean the insid...
Page 64
6-2 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 5 (3/$&,1* 7+( &21680$%/(6 721(5 $1' '580 &$575,'*(6 to check the remaining capacities of the consumables: m 85 ok - advanced f...
Page 65
Maintenance 6-3 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm caution - the fusing unit...
Page 66
6-4 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + 3 - remove the new toner cartridge from its box. Hold it firmly with both hands and shake it in the directions shown by the a...
Page 67
Maintenance 6-5 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm . The cartridge will clic...
Page 68
6-6 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + press ok on the scanner keypad. The display shows: + insert chip card (supplied with the toner cartridge) into the card reade...
Page 69
Maintenance 6-7 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 5hsodflqjwkhguxpfduwulgjh...
Page 70
6-8 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm caution - in order to protect the environment, do not throw away the used drum cartridge. Used cartridges should be disposed of...
Page 71
Maintenance 6-9 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + 4 - install the drum ca...
Page 72
6-10 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + 5 - holding the toner cartridge by its handle, slide it into the printer ensure that the four pins (two on either side of th...
Page 73
Maintenance 6-11 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm the toner cartridge will...
Page 74
6-12 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + insert the chip card (supplied with the drum cartridge) into the card reader ensuring that the chip is entered as shown in t...
Page 75
Maintenance 6-13 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm & /($1,1* &ohdqlqjwkhvfd...
Page 76
6-14 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm &ohdqlqjwkhsdshuihhguroohu + 1 - turn off the printer and unplug the power cord + 2 - press the upper cover release button and...
Page 77
Maintenance 6-15 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 6 (59,&,1* for guarantee...
Page 78
6-16 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 7udqvplvvlrqiurpphpru\ you have the choice between: • waiting until the transmission takes place at the given time • restartin...
Page 79
Maintenance 6-17 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm code 0d - transmission f...
Page 80
6-18 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 3 5,17(5 (55256 (uuruphvvdjhv if the printer has one of the problems described below, the signal "on" flashes red, and you can...
Page 81
Maintenance 6-19 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 3ulqwhusdshumdp inside t...
Page 82
6-20 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + close the upper cover and press it down gently but firmly until it locks into place 3dshumdpdwwkhihhghuvdqgwud\v the figures...
Page 83
Maintenance 6-21 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 6 &$11(5 ,1&,'(176 6fdqq...
Page 84
6-22 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + open the scanner cover by pressing key (a) + remove the jammed paper (b) without tearing it + then, close the scanner cover ...
Page 85
Maintenance 6-23 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm 0 ,6&(//$1(286 ,1&,'(176...
Page 86
6-24 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm + 4 - put the machine in the plastic bag and then in the original package, with all the original packing material + put all th...
Page 87
Maintenance 6-25 op eration setting yo ur machine getting started directory mainte nanc e safety contents installation date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm & +$5$&7(5,67,&6 device ...
Page 88
6-26 maintenance date en cours : 23 avril 2003 \\sct31nt3\be31-doc\doc 31 - en cours\travaux en cours\mfl-mfc-mfk\mfl_251 270 819 a_laser pro 341 gb_export\maintenance gb.Fm encoding type: mh (modified huffman) mr (modified read) mmr (modified modified read) specifications may change for improvement...
Page 89
Safety 7-1 operation setting yo ur machine getting started directory m a intenance safety contents installation date en cours : 23 avril 2003 $)(7 safety warning before powering on your unit, make sure the mains outlet it is connected to meets the requirements printed on the warning label on your un...
Page 90
7-2 safety date en cours : 23 avril 2003 mfl_251 270 819 a_laser pro 341 gb.Book page 2 mercredi, 23. Avril 2003 2:55 14.