1. DL manuals
  2. SAGEMCOM
  3. Network Router
  4. F@ST 4310
  5. Reference Manual

SAGEMCOM F@ST 4310 Reference Manual

Summary of F@ST 4310

  • Page 1

    Reference manual f@st 4310

  • Page 3

    F@st 4310 reference manual page 0-1 sagemcom broadband sas document. Reproduction and disclosure prohibited sagemcom assiduously monitors technical developments and is constantly seeking to improve its products in order to let its clients take full advantage of them. It therefore reserves the right ...

  • Page 4

    Page 0-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited how should the document be used? This reference manual is organised into sections and annexes. These sections and annexes cover the following subjects. Section 1 presentation of f@st 4310 equi...

  • Page 5: Contents

    F@st 4310 reference manual page 0-3 sagemcom broadband sas document. Reproduction and disclosure prohibited contents guide to symbols used in this manual ......................................................................................................... 0-1 how should the document be used? ......

  • Page 6

    Page 0-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.3 adsl connection status ................................................................................................................... 5-5 5.4 display frame ..............................

  • Page 7

    F@st 4310 reference manual page 0-5 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.2 system log ...................................................................................................................................... 5-125 5.11.3 security log ................

  • Page 8

    Page 0-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited e.2 default configuration for the local network(lan) .............................................................................. E-2 e.3 default configuration for the local wireless network...

  • Page 9: 1. Introduction

    F@st 4310 reference manual page 1-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 1. Introduction this section covers • presentation of the f@st 4310 router § 1.1 • composition of the packaging § 1.2 • required hardware and software § 1.3.

  • Page 10: 1.1 Presentation

    1- introduction page 1-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 1.1 presentation this reference manual is dedicated to the f@st 4310 equipment. This equipment is a router which gives users broadband internet access from their computer or th...

  • Page 11: 1.1.2 Characteristic

    1- introduction f@st 4310 reference manual page 1-3 sagemcom broadband sas document. Reproduction and disclosure prohibited 1.1.2 characteristic its principal characteristics and functions are as follows: • high-performance secure bridge/router with adsl/adsl2/adsl2+ and fast ethernet (for ftth) int...

  • Page 12

    1- introduction page 1-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 1.2 composition of router pack the router pack is composed of the following elements (present content may vary): item description 1 f@st 4310 router 2 mains adapter 3 adsl rj11...

  • Page 13: 1.3 (Minimum) Prerequisites

    1- introduction f@st 4310 reference manual page 1-5 sagemcom broadband sas document. Reproduction and disclosure prohibited 1.3 (minimum) prerequisites using a router requires a minimum of: • a computer equipped with: - a wi-fi 802.11n interface, or - an ethernet interface (10/100base-t). • a web br...

  • Page 14

    1- introduction page 1-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited.

  • Page 15

    F@st 4310 reference manual page 2-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 2. Description and connection of router this section covers • the description of your router § 2.1 • connecting the ports of your router § 2.2 • installing your router § 2.3 • installation saf...

  • Page 16: 2.1 Description

    2- description and connection of router page 2-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 2.1 description the following figure gives an overview of a router f@st 4310. Figure 2.1 - overview of case this case consists principally of a lid and ...

  • Page 17: 2.1.1 Connectors

    2- description and connection of router f@st 4310 reference manual page 2-3 sagemcom broadband sas document. Reproduction and disclosure prohibited 2.1.1 connectors marking meaning line rj11 connector - 6 pts. This connector is identified by the colour grey. It is used for the connection to an adsl ...

  • Page 18: 2.1.2 Leds and Buttons

    2- description and connection of router page 2-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 2.1.2 leds and buttons 2.1.2.1 on the front panel the following table describes the meaning of the leds on the front panel of the router: led status mea...

  • Page 19

    2- description and connection of router f@st 4310 reference manual page 2-5 sagemcom broadband sas document. Reproduction and disclosure prohibited 2.1.2.2 on the right panel the following table describes the meaning of the buttons on the right panel of the router: button action wps this button allo...

  • Page 20

    2- description and connection of router page 2-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 2.2 connecting the ports of your router figure 2.2 - interconnection of ports of f@st 4310 computers associated with the 802.11n wi-fi network ftth cabl...

  • Page 21: 2.3.1 Powering Up

    2- description and connection of router f@st 4310 reference manual page 2-7 sagemcom broadband sas document. Reproduction and disclosure prohibited 2.3 installation of your f@st 4310 2.3.1 powering up 1. First connect the end of the mains adapter lead, supplied with the equipment, to the power socke...

  • Page 22

    2- description and connection of router page 2-8 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 2.3.3 connecting to your computer two kinds of connection can be made: • connection of the ethernet interface of your router to your computer. • connect...

  • Page 23

    2- description and connection of router f@st 4310 reference manual page 2-9 sagemcom broadband sas document. Reproduction and disclosure prohibited 2.3.4 connecting the ethernet interface of your router to your tv decoder 1. Connect the end of the yellow ethernet cable (rj45/rj45) supplied in the pa...

  • Page 24

    2- description and connection of router page 2-10 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 2.4 installation safety instructions power supply source • do not cover the router’s mains adapter. • the router comes with its own mains adapter. Do n...

  • Page 25: The F@st 4310 Router

    F@st 4310 reference manual page 3-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 3. Installing and configuring the f@st 4310 router.

  • Page 26

    3- installing and configuring the f@st 4310 router page 3-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited for the installation of the f@st 4310, please refer to the quick installation guide of this product..

  • Page 27

    F@st 4310 reference manual page 4-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 4. Configuration of network parameters this section covers • configuring as a dhcp client § 4.1 • reading status of the dhcp server § 4.2 • reading data of the dhcp client § 4.3.

  • Page 28

    4- configuration of network parameters page 4-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited the aim of this section is: 1. To configure your computer so that it is able to communicate with your router. 2. To display the "networks" parameters of ...

  • Page 29

    4- configuration of network parameters f@st 4310 reference manual page 4-3 sagemcom broadband sas document. Reproduction and disclosure prohibited 4.1 configuring as a dhcp client in windows xp 1. Click on start > control panel > network connections. 2. Right-click the appropriate network, and then ...

  • Page 30

    4- configuration of network parameters page 4-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 4.2 status of the dhcp server to obtain the status of the dhcp server: 1. Open your browser. 2. Enter the router’s ip address (by default http://192.168....

  • Page 31: 4.3 Data of The Dhcp Client

    4- configuration of network parameters f@st 4310 reference manual page 4-5 sagemcom broadband sas document. Reproduction and disclosure prohibited 4.3 data of the dhcp client to obtain this data: in windows xp 1. Click on start > run, enter cmd and then click ok. The command prompt screen appears. 2...

  • Page 32

    4- configuration of network parameters page 4-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited.

  • Page 33

    F@st 4310 reference manual page 5-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 5. Information / configuration this section covers • accessing the welcome screen § 5.1 • recommendations for using the configuration screens § 5.2 • the adsl connection status § 5.3 • indicat...

  • Page 34

    5- information / configuration page 5-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.1 accessing the welcome screen if you are using your computer's ethernet card to configure your router, connect it to an ethernet port (lan1 to lan4). Your rou...

  • Page 35

    5- information / configuration f@st 4310 reference manual page 5-3 sagemcom broadband sas document. Reproduction and disclosure prohibited 4. Your computer’s web browser opens and displays the welcome screen of the router’s http configuration tool.. The configuration menus appear on the left hand si...

  • Page 36: 5.2 Recommendations

    5- information / configuration page 5-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.2 recommendations the meaning of the main buttons most commonly present in all the configuration windows is provided in the table below. Basic principles 1. To...

  • Page 37: 5.3 Adsl Connection Status

    5- information / configuration f@st 4310 reference manual page 5-5 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.3 adsl connection status refer to subsection 6.2.1 - /summary. 5.4 display frame the router’s activity status is always visible at the left corner or the top r...

  • Page 38: 5.5 Device Info

    5- information / configuration page 5-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5 device info clicking on this heading displays the following menus: • summary (see subsection 5.5.1) • wan (see subsection 5.5.2) • 3g status (see subsection ...

  • Page 39: 5.5.2 Wan

    5- information / configuration f@st 4310 reference manual page 5-7 sagemcom broadband sas document. Reproduction and disclosure prohibited the following table provides the meaning of the different fields which are displayed. 5.5.2 wan object: this menu is used to display all the parameters which con...

  • Page 40: 5.5.3 3G Status

    5- information / configuration page 5-8 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.3 3g status object: this menu is used to display all the parameters which concern 3g connection. • in the device info menu, select 3g status. The following s...

  • Page 41

    5- information / configuration f@st 4310 reference manual page 5-9 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.4.1 lan object: this menu is used to display all the parameters which concern the local network (lan). • in the device info menu, select statistics then sele...

  • Page 42

    5- information / configuration page 5-10 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.4.2 wan service object: this menu is used to display all the parameters which concern the remote network (wan). • in the device info menu, select statistics...

  • Page 43

    5- information / configuration f@st 4310 reference manual page 5-11 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.4.3 xtm object: this menu is used to display all the xtm statistics of the line. • in the device info menu, select statistics then select xtm. The following...

  • Page 44

    5- information / configuration page 5-12 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.4.4 xdsl object: this menu is used to display all the xdsl statistics of the line. • in the device info menu, select statistics then select xdsl. The follow...

  • Page 45: 5.5.5 Route

    5- information / configuration f@st 4310 reference manual page 5-13 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.5 route object: this menu is used to display all the information concerning your router's routing. • in the device info menu, select route. The following sc...

  • Page 46: 5.5.6 Arp

    5- information / configuration page 5-14 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.6 arp object: this menu is used to display all the information concerning address resolution (arp: address resolution protocol). This shows the physical add...

  • Page 47: 5.5.7 Dhcp

    5- information / configuration f@st 4310 reference manual page 5-15 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.5.7 dhcp object: this menu is used to display all the computers which obtained an ip address from the router's dhcp server. • in the device info menu, select ...

  • Page 48: 5.6 Internet Connection

    5- information / configuration page 5-16 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.6 internet connection object: this menu lets you enter your connection id and your connection password. • select the internet connection menu. The following s...

  • Page 49: 5.7 Advanced Setup

    5- information / configuration f@st 4310 reference manual page 5-17 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7 advanced setup object: this menu is used to configure the specific parameters for your router. This section contains the following menus: • layer2 interface...

  • Page 50: 5.7.1 Layer2 Interface

    5- information / configuration page 5-18 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.1 layer2 interface object: this menu is used to configure dsl interfaces. This section contains the following menus: • atm interface (see subsection 5.7.1.1...

  • Page 51

    5- information / configuration f@st 4310 reference manual page 5-19 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.1.2 add • click on the add button to display the following screen: atm pvc configuration scheduler alg value defined to perform multitasking (execute more t...

  • Page 52

    5- information / configuration page 5-20 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited select dsl link type select the type of network protocol from the scroll down list: • eoa: ethernet over atm • pppoa: ppp over atm • ipoa: ip over atm note: eoa...

  • Page 53

    5- information / configuration f@st 4310 reference manual page 5-21 sagemcom broadband sas document. Reproduction and disclosure prohibited select connection mode the connection mode selection only appears if you have selected the eoa dsl link type. Encapsulation modes 5.7.1.3 eth interface object: ...

  • Page 54

    5- information / configuration page 5-22 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.1.4 add • click on the add button to display the following screen: • click on the apply/save button to confirm the creation of the new eth interface. Dsl li...

  • Page 55: 5.7.2 Wan Service

    5- information / configuration f@st 4310 reference manual page 5-23 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2 wan service object: this menu is associated with the remote network. It is used to display the list of all the configured pvcs, and to add pvcs or remove ...

  • Page 56

    5- information / configuration page 5-24 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.1 add • click on the add button. • select the dsl atm interface for the wan service. • click on the next button to continue configuring the wan service. N...

  • Page 57

    5- information / configuration f@st 4310 reference manual page 5-25 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.2 ethernet over atm – ppp over ethernet (pppoe) • select the wan service type ppp over ethernet (pppoe). Field action default value enter service descript...

  • Page 58

    5- information / configuration page 5-26 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the wan service. Field action default value ppp username enter your connection id. This information is provid...

  • Page 59

    5- information / configuration f@st 4310 reference manual page 5-27 sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in pppoe mode. Inactivity timeout (minutes):[1-4320] a enter the inactivity time. Th...

  • Page 60

    5- information / configuration page 5-28 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • select a preferred wan interface as the system default gateway. • click on the next button to continue configuring the remote network (wan) in pppoe mode. Fie...

  • Page 61

    5- information / configuration f@st 4310 reference manual page 5-29 sagemcom broadband sas document. Reproduction and disclosure prohibited select dns server interface from available wan interfaces • click on the next button to continue configuring the remote network (wan) in pppoe mode. • click on ...

  • Page 62

    5- information / configuration page 5-30 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.3 ethernet over atm – ip over ethernet (ipoe) • select the wan service type ip over ethernet (ipoe). Field action default value enter service description ...

  • Page 63

    5- information / configuration f@st 4310 reference manual page 5-31 sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the wan service. Field action default value obtain an ip address automatically check the box to obtain an ip ...

  • Page 64

    5- information / configuration page 5-32 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in ipoe mode. Field action default value enable nat check the box to activate the na...

  • Page 65

    5- information / configuration f@st 4310 reference manual page 5-33 sagemcom broadband sas document. Reproduction and disclosure prohibited • select a preferred wan interface as the system default gateway. • click on the next button to continue configuring the remote network (wan) in ipoe mode. Fiel...

  • Page 66

    5- information / configuration page 5-34 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited select dns server interface from available wan interfaces • click on the next button to continue configuring the remote network (wan) in ipoe mode. • click on t...

  • Page 67

    5- information / configuration f@st 4310 reference manual page 5-35 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.4 ethernet over atm - bridging • select the wan service type bridging. Field action default value enter service description displays the name of the servi...

  • Page 68

    5- information / configuration page 5-36 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in bridge mode. • click on the apply/save button to confirm the new wan service. Fie...

  • Page 69

    5- information / configuration f@st 4310 reference manual page 5-37 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.5 ppp over atm (pppoa) field action default value enter service description displays the name of the service being configured. This name, which is allocat...

  • Page 70

    5- information / configuration page 5-38 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the wan service. Field action default value ppp username enter your connection id. This information is provid...

  • Page 71

    5- information / configuration f@st 4310 reference manual page 5-39 sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in pppoa mode. • select a preferred wan interface as the system default gateway. Ppp...

  • Page 72

    5- information / configuration page 5-40 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in pppoa mode. Select dns server interface from available wan interfaces field actio...

  • Page 73

    5- information / configuration f@st 4310 reference manual page 5-41 sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in pppoa mode. • click on the apply/save button to confirm the new wan service. Fiel...

  • Page 74

    5- information / configuration page 5-42 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.2.6 ip over atm (ipoa) field action default value enter service description displays the name of the service being configured. This name, which is allocated...

  • Page 75

    5- information / configuration f@st 4310 reference manual page 5-43 sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the wan service. Field action default value wan ip address enter the static ip address. 0.0.0.0 wan subnet ma...

  • Page 76

    5- information / configuration page 5-44 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the next button to continue configuring the remote network (wan) in ipoa mode. • click on the next button to continue configuring the remote network ...

  • Page 77

    5- information / configuration f@st 4310 reference manual page 5-45 sagemcom broadband sas document. Reproduction and disclosure prohibited • select a preferred wan interface as the system default gateway. • click on the next button to continue configuring the remote network (wan) in ipoa mode. Fiel...

  • Page 78

    5- information / configuration page 5-46 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited select dns server interface from available wan interfaces • click on the next button to continue configuring the remote network (wan) in ipoa mode. • click on t...

  • Page 79: 5.7.3 3G Config

    5- information / configuration f@st 4310 reference manual page 5-47 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.3 3g config object: this menu lets you configure 3g backup support to use a 3g usb modem that connected to the usb interface of the router as a backup of ad...

  • Page 80: 5.7.4 Lan

    5- information / configuration page 5-48 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.4 lan object: this is used to configure the ip parameters for the local network (lan). • in the advanced setup menu, select lan. The following screen opens:...

  • Page 81

    5- information / configuration f@st 4310 reference manual page 5-49 sagemcom broadband sas document. Reproduction and disclosure prohibited enable dhcp check this box to activate your router's dhcp server. Note: you must configure your computer as dhcp client and dns client (or enter the primary and...

  • Page 82: 5.7.5 Nat

    5- information / configuration page 5-50 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.5 nat object: nat is a configurable ip address translation function which is applied to the interfaces of your router which you have activated for this func...

  • Page 83

    5- information / configuration f@st 4310 reference manual page 5-51 sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button; the following screen appears: external port end internal end port (wan side). Protocol transport protocol (tcp, udp or tcp/udp). ...

  • Page 84

    5- information / configuration page 5-52 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited proceed as follows: • select the required wan interface in the use interface list. • check the select a service box, then select the service of your choice from...

  • Page 85

    5- information / configuration f@st 4310 reference manual page 5-53 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.5.2 port triggering object: the purpose of this menu is to open dynamically the firewall ports (open ports) via "trigger ports" when an application (such as...

  • Page 86

    5- information / configuration page 5-54 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button; the following screen appears: to configure trigger port and open port, proceed as follows: • select the required wan interface in...

  • Page 87

    5- information / configuration f@st 4310 reference manual page 5-55 sagemcom broadband sas document. Reproduction and disclosure prohibited a few rules for entering values: • when you want to select a single port, the start port (trigger port start or open port start) and the end port (trigger port ...

  • Page 88

    5- information / configuration page 5-56 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.5.3 dmz host object: this "dmz" (demilitarized zone) lets you access the server you selected directly via the internet without going through the "firewall"....

  • Page 89: 5.7.6 Security

    5- information / configuration f@st 4310 reference manual page 5-57 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.6 security 5.7.6.1 ip filtering outgoing object: this menu is used to create outgoing ip filters to refuse data from the lan to the wan and list the existin...

  • Page 90

    5- information / configuration page 5-58 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field action filter name enter a representative name for the filter. Ip version select the dedica...

  • Page 91

    5- information / configuration f@st 4310 reference manual page 5-59 sagemcom broadband sas document. Reproduction and disclosure prohibited incoming object: this menu is used to create incoming ip filters to refuse data from the wan to the lan and list the existing incoming ip filters. By default, a...

  • Page 92

    5- information / configuration page 5-60 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited wan interfaces field action filter name enter a representative name for the filter. Ip version select the dedicated ip version from the scroll down list (for ex...

  • Page 93: 5.7.7 Parental Control

    5- information / configuration f@st 4310 reference manual page 5-61 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.7 parental control object: this menu is used to create and manage access time and url restrictions for lan devices which are connected to the router. This s...

  • Page 94

    5- information / configuration page 5-62 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field action user name enter a representative name for the lan device. Mac address enter the mac ...

  • Page 95

    5- information / configuration f@st 4310 reference manual page 5-63 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.7.2 url filter object: this menu is used to create and manage url access restriction for lan devices which are connected to the router. • in the advanced se...

  • Page 96: 5.7.8 Quality of Service

    5- information / configuration page 5-64 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.8 quality of service this menu contains the following sub-menus: • queue config (see subsection 5.7.8.1) • qos classification (see subsection 5.7.8.2) objec...

  • Page 97

    5- information / configuration f@st 4310 reference manual page 5-65 sagemcom broadband sas document. Reproduction and disclosure prohibited field action enable qos check the enable qos box to authorize qos actions to be performed at the ingress and egress interfaces. Select default dscp mark the ip ...

  • Page 98

    5- information / configuration page 5-66 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.8.1 queue config object: this menu is used to enable or disable qos on an interface, and to configure qos to use policy maps attached to an interface. • in ...

  • Page 99

    5- information / configuration f@st 4310 reference manual page 5-67 sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field action name enter a representative name. Enable select from the scroll down list: • disable...

  • Page 100

    5- information / configuration page 5-68 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.8.2 qos classification object: this menu is used for the classification of packets into traffic classes, and for the enforcement of policies using queuing. ...

  • Page 101

    5- information / configuration f@st 4310 reference manual page 5-69 sagemcom broadband sas document. Reproduction and disclosure prohibited field state class name traffic class name. Order sequence number. Classification criteria class intf class interface (local, eth0, wl0). Ether type nature of th...

  • Page 102

    5- information / configuration page 5-70 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field action traffic class name enter a name for the traffic class you want to create. Rule order...

  • Page 103

    5- information / configuration f@st 4310 reference manual page 5-71 sagemcom broadband sas document. Reproduction and disclosure prohibited ether type select from the scroll down list: • ip • arp • ipv6 • pppoe_disc • pppoe_ses • 8865 • 8866 • 8021q source mac address enter a "source" mac address. S...

  • Page 104: 5.7.9 Routing

    5- information / configuration page 5-72 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.9 routing this menu contains the following sub-menus: • default gateway (see subsection 5.7.9.1) • static route (see subsection 5.7.9.2) 5.7.9.1 default gat...

  • Page 105

    5- information / configuration f@st 4310 reference manual page 5-73 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.9.2 static route object: this menu is used to add a static route. • in the advanced setup menu, select routing then select static route. The following scree...

  • Page 106

    5- information / configuration page 5-74 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field action ip version internet protocol. Destination network address/prefix length enter the ip...

  • Page 107: 5.7.10 Dns

    5- information / configuration f@st 4310 reference manual page 5-75 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.10 dns object: this menu lets you select dns server interface from available wan interfaces or enter static dns server ip addresses for the system. This sec...

  • Page 108

    5- information / configuration page 5-76 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited select dns server interface from available wan interfaces 5.7.10.2 dynamic dns object: enables a web surfer to access your router (having no fixed ip address bu...

  • Page 109

    5- information / configuration f@st 4310 reference manual page 5-77 sagemcom broadband sas document. Reproduction and disclosure prohibited add the following screen opens: add dynamic ddns dyndns settings field action d-dns provider select from the relevant drop-down list: • dyndns.Org • tzo hostnam...

  • Page 110: 5.7.11 Dsl

    5- information / configuration page 5-78 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.11 dsl object: the purpose of this menu is to parameter your adsl line. • in the advanced setup menu, select dsl. The following screen opens: modulation • c...

  • Page 111

    5- information / configuration f@st 4310 reference manual page 5-79 sagemcom broadband sas document. Reproduction and disclosure prohibited capability • click on the advanced settings button to display the following screen: field default value bitswap enable checked sra enable not checked field defa...

  • Page 112

    5- information / configuration page 5-80 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • click on the tone selection button to display the following screen: • click on the check all button to select all the tones or the clear all button to select ...

  • Page 113: 5.7.12 Upnp

    5- information / configuration f@st 4310 reference manual page 5-81 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.12 upnp object: this menu is used to enable or disable the upnp protocol. The upnp function lets you automatically join a network dynamically and obtain an ...

  • Page 114: 5.7.13 Dns Proxy

    5- information / configuration page 5-82 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.13 dns proxy object: this menu is used to enable or disable dns proxy. • in the advanced setup menu, select dns proxy. The following screen opens: field act...

  • Page 115: 5.7.14 Interface Grouping

    5- information / configuration f@st 4310 reference manual page 5-83 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.14 interface grouping object: this menu is used to host a service (video, data, sip) on an interface (eth or wi-fi) of your router. • in the advanced setup ...

  • Page 116

    5- information / configuration page 5-84 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to display the following screen: field meaning group name enter a name which represents the service you want to associate with a d...

  • Page 117

    5- information / configuration f@st 4310 reference manual page 5-85 sagemcom broadband sas document. Reproduction and disclosure prohibited the following diagram illustrates the path of the "video" and "data" flows. Internet vc1 vc2 wi-fi.

  • Page 118: 5.7.15 Certificate

    5- information / configuration page 5-86 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.15 certificate this menu contains the following sub-menus: • local (see subsection 5.7.15.1) • trusted ca (see subsection 5.7.15.2) 5.7.15.1 local object: t...

  • Page 119

    5- information / configuration f@st 4310 reference manual page 5-87 sagemcom broadband sas document. Reproduction and disclosure prohibited create certificate request • click on the create certificate request button to display the following screen: field action certificate name enter the name of the...

  • Page 120

    5- information / configuration page 5-88 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited import certificate • click on the import certificate button to display the following screen: field action certificate name enter the name of the certificate. Ce...

  • Page 121

    5- information / configuration f@st 4310 reference manual page 5-89 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.15.2 trusted ca object: this menu is used to manage the identity certificates of the remote servers. These certificates, which are used by tr-69 (in ssl mod...

  • Page 122: 5.7.16 Power Management

    5- information / configuration page 5-90 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.16 power management object: this menu lets you control power consumption selecting the different options. • in the advanced setup menu, select power managem...

  • Page 123: 5.7.17 Multicast

    5- information / configuration f@st 4310 reference manual page 5-91 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.7.17 multicast object: this menu lets you configure igmp protocol necessary to use video conferencing and teleconferencing applications for example. • in the ...

  • Page 124

    5- information / configuration page 5-92 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited maximum multicast data sources (for igmpv3 : (1 - 24) allows you to set the maximum number of groups sources allowed per multicast group. It can be changed dyna...

  • Page 125: 5.8 Wireless

    5- information / configuration f@st 4310 reference manual page 5-93 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8 wireless object: this menu lets you activate a network and also allows you to configure all the basic and advanced parameters of a wireless network. This se...

  • Page 126

    5- information / configuration page 5-94 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.1.1 wireless - basic field action/meaning default value enable wireless check the box to activate the wireless network (wi-fi). Note: the steady "wi-fi" led...

  • Page 127

    5- information / configuration f@st 4310 reference manual page 5-95 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.1.2 guest/virtual access points field action/meaning default value enabled check the box to activate the second wireless network (wi-fi). Unchecked ssid ent...

  • Page 128: 5.8.2 Security

    5- information / configuration page 5-96 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.2 security object: the purpose of this menu is to secure your wireless network (wi-fi). All types of ingenious solutions have been deployed to combat attack...

  • Page 129

    5- information / configuration f@st 4310 reference manual page 5-97 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.2.1 wps setup 5.8.2.2 manual setup ap field action/meaning default value enable wps check the box to activate wps. Enabled add client a a. This feature is a...

  • Page 130

    5- information / configuration page 5-98 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.2.3 network authentication open object: the open system authentication enables all users of the wi-fi network to authenticate themselves with the router. No...

  • Page 131

    5- information / configuration f@st 4310 reference manual page 5-99 sagemcom broadband sas document. Reproduction and disclosure prohibited shared object: this level of security enables users of the wi-fi network to be authenticated using their ssid or their wep key. In this authentication mode, the...

  • Page 132

    5- information / configuration page 5-100 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 802.1x object: the "802.1x" standard is based on the eap protocol (extensible authentication protocol). This enables users of the wi-fi network to be authentic...

  • Page 133

    5- information / configuration f@st 4310 reference manual page 5-101 sagemcom broadband sas document. Reproduction and disclosure prohibited wpa object: this encryption mode applies the functionalities of the wpa protocol and requires the use of a "radius" authentication server. • select the wpa sec...

  • Page 134

    5- information / configuration page 5-102 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited wpa-psk object: this encryption mode applies the functionalities of the wpa protocol with a pre-shared key, but does not require an authentication server. The ...

  • Page 135

    5- information / configuration f@st 4310 reference manual page 5-103 sagemcom broadband sas document. Reproduction and disclosure prohibited wpa2 object: this encryption mode applies the functionalities of the wpa2 protocol and requires the use of a "radius" authentication server. • select the wpa2 ...

  • Page 136

    5- information / configuration page 5-104 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited wpa2-psk object: this encryption mode uses the wpa2 protocol with a pre-shared key, but does not require an authentication server. The key is regenerated after...

  • Page 137

    5- information / configuration f@st 4310 reference manual page 5-105 sagemcom broadband sas document. Reproduction and disclosure prohibited • mixed wpa2/wpa object: this encryption mode applies the functionalities of the wpa2 and wpa protocols. It needs a "radius" authentication server. • select th...

  • Page 138

    5- information / configuration page 5-106 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited mixed wpa2/wpa-psk object: this encryption mode applies the functionalities of the wpa2-psk and wpa-psk protocols. It does not need a "radius" authentication s...

  • Page 139

    5- information / configuration f@st 4310 reference manual page 5-107 sagemcom broadband sas document. Reproduction and disclosure prohibited field action/meaning default value wpa/wapi passphrase enter a secret phrase. This may contain 8 to 63 ascii characters or 64 hexadecimal symbols (256 bits). C...

  • Page 140: 5.8.3 Mac Filter

    5- information / configuration page 5-108 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.3 mac filter object: the "mac filter" function is used to restrict the access to the wireless network. • in the wireless menu, select mac filter. The follo...

  • Page 141

    5- information / configuration f@st 4310 reference manual page 5-109 sagemcom broadband sas document. Reproduction and disclosure prohibited add • click on the add button to add a mac address to be filtered (address of a computer - authorised or non authorized, according the deny or allow list - to ...

  • Page 142: 5.8.4 Wireless Bridge

    5- information / configuration page 5-110 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.4 wireless bridge object: this menu is used to configure wireless bridge features of the wireless lan interface • in the wireless menu, select wireless bri...

  • Page 143: 5.8.5 Advanced

    5- information / configuration f@st 4310 reference manual page 5-111 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.5 advanced object: this menu is used to configure the essential parameters of your wireless network (wlan) 802.11 and configure certain security parameters...

  • Page 144

    5- information / configuration page 5-112 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited auto channel timer (min) configure the duration, in minutes, during which the router must seek the best wireless channel. This option is only available when th...

  • Page 145

    5- information / configuration f@st 4310 reference manual page 5-113 sagemcom broadband sas document. Reproduction and disclosure prohibited radio power save pps the maximum number of packets per seconds that can be processed by the wlan interface for a duration of quiet time, described above, befor...

  • Page 146

    5- information / configuration page 5-114 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited wmm(wi-fi multimedia) select enabled to apply the wmm support, or disabled not to apply it in the scroll down list. Enabled wmm no acknowledgem ent select enab...

  • Page 147: 5.8.6 Station Info

    5- information / configuration f@st 4310 reference manual page 5-115 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.8.6 station info object: this menu is used to display all the wireless stations certified, with their status. • in the wireless menu, select station info. Th...

  • Page 148: 5.9 Multimedia

    5- information / configuration page 5-116 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.9 multimedia object: this menu is used to activate or deactivate the options of the multimedia interface of the router. This section contains the following s...

  • Page 149

    5- information / configuration f@st 4310 reference manual page 5-117 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.9.2.1 storage device info 5.9.2.2 user accounts storage useraccount configuration • choose add, or remove to configure user accounts. • in the boxes below, e...

  • Page 150

    5- information / configuration page 5-118 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • in this example , the username = test , the password = test , the volumename is showed in the storage device info = usb1_1..

  • Page 151: 5.10 Diagnostics

    5- information / configuration f@st 4310 reference manual page 5-119 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.10 diagnostics object: this menu is used to display all the tests performed on the connections made from your router to your internet service provider (isp)....

  • Page 152: 5.11 Management

    5- information / configuration page 5-120 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11 management object: this menu lets you manage your router. This section contains the following menus: • settings (see subsection 5.11.1) • system log (see ...

  • Page 153

    5- information / configuration f@st 4310 reference manual page 5-121 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.1.1 backup object: this menu is used to backup the current configuration to a file with a .Conf extension. • in the management menu, select settings then ...

  • Page 154

    5- information / configuration page 5-122 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited • select the directory where you want to save the "backupsettings.Conf" configuration file. Note the process takes a few seconds..

  • Page 155

    5- information / configuration f@st 4310 reference manual page 5-123 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.1.2 update object: this menu enables the router to recover a configuration which has already been saved to a file with a .Conf extension. • in the managem...

  • Page 156

    5- information / configuration page 5-124 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.1.3 restore default object: this menu is used to return to factory configuration. • in the management menu, select settings then restore default. The foll...

  • Page 157: 5.11.2 System Log

    5- information / configuration f@st 4310 reference manual page 5-125 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.2 system log object: this menu is used to view and/or configure the events which occur on your router. • in the management menu, select system log. The fo...

  • Page 158

    5- information / configuration page 5-126 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.2.2 configure system log • click on the configure system log button to configure the events which occur on your router. Field action default value log sel...

  • Page 159

    5- information / configuration f@st 4310 reference manual page 5-127 sagemcom broadband sas document. Reproduction and disclosure prohibited mode select the destination id from the scroll down list: • local: all the events are returned to your router via a "buffer" memory. • remote: all the events a...

  • Page 160: 5.11.3 Security Log

    5- information / configuration page 5-128 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.3 security log object: this menu allows you to view the security log and configure the security log options. This log deals with all the events (connectio...

  • Page 161: 5.11.4 Tr-069 Client

    5- information / configuration f@st 4310 reference manual page 5-129 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.4 tr-069 client object: the tr-069 protocol (wan management protocol) is used, via a remote server (auto-configuration server (acs)) to auto configure you...

  • Page 162: 5.11.5 Internet Time

    5- information / configuration page 5-130 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.5 internet time object: this menu lets you display the date and time in the date / time field of your http configurer: - either the one delivered by your ...

  • Page 163: 5.11.6 Access Control

    5- information / configuration f@st 4310 reference manual page 5-131 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.6 access control this menu contains the following sub menus: • passwords (see subsection 5.11.6.1) 5.11.6.1 passwords • in the management menu, select acc...

  • Page 164: 5.11.7 Update Software

    5- information / configuration page 5-132 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.7 update software object: this menu lets you update the latest version of the router software. • in the management menu, select update software. The follo...

  • Page 165: 5.11.8 Reboot

    5- information / configuration f@st 4310 reference manual page 5-133 sagemcom broadband sas document. Reproduction and disclosure prohibited 5.11.8 reboot object: this menu lets you save all the modifications made to the current configuration and restart the router with its new parameters. • in the ...

  • Page 166

    5- information / configuration page 5-134 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited.

  • Page 167: 6. Internet Access Service

    F@st 4310 reference manual page 6-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 6. Internet access service this section covers • description of the internet access service p. 6-2.

  • Page 168

    6- internet access service page 6-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited the router has been designed to enable you to access the internet as simply as possible. Most of the router's parameters are already set: • it is configured by defau...

  • Page 169: 7. Tv Over Adsl Service

    F@st 4310 reference manual page 7-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 7. Tv over adsl service this section covers • the introduction § 7.1 • access to the optional tv over adsl service § 7.2.

  • Page 170: 7.1 Introduction

    7- tv over adsl service page 7-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 7.1 introduction your router is compatible with tv over adsl technology. 7.2 access to the optional tv over adsl service to access this service, you must have: • made t...

  • Page 171: 8. Updating The Firmware

    F@st 4310 reference manual page 8-1 sagemcom broadband sas document. Reproduction and disclosure prohibited 8. Updating the firmware this section covers • setting up the download p. 8-2.

  • Page 172

    8- updating the firmware page 8-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited you can update the firmware using one of the following methods: • via http • via tr69 protocol • automatically: the new firmware version download is performed automati...

  • Page 173: Annex A - Troubleshooting

    F@st 4310 reference manual page a-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex a - troubleshooting this section covers • checking the assignment of an ip address § a.1 • front panel leds § a.2 • supervision of your router § a.3 • the "diagnostics" tool § a.4 • inte...

  • Page 174

    A- annex a - troubleshooting page a-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited a.1 checking the assignment of an ip address in windows seven, vista, xp 1. Click on start > run, enter cmd and then click ok. (start > all programs > accessories ...

  • Page 175: A.2 Front Panel Leds

    A- annex a - troubleshooting f@st 4310 reference manual page a-3 sagemcom broadband sas document. Reproduction and disclosure prohibited a.2 front panel leds note when the router is switched on, the led is green. If no connection is made, the led is off. Led status meaning power off power off green ...

  • Page 176: A.3 Supervising Your Router

    A- annex a - troubleshooting page a-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited a.3 supervising your router you can monitor the router's activity and status using the router's built-in "dsl router" http controller, available in the http config...

  • Page 177: A.4 Diagnostics Tool

    A- annex a - troubleshooting f@st 4310 reference manual page a-5 sagemcom broadband sas document. Reproduction and disclosure prohibited a.4 diagnostics tool to access the diagnostic tool: 1. Open your browser. 2. Enter the router's ip address or enter the following url: http://myrouter. 3. In the l...

  • Page 178: A.5 Interpreting The Leds

    A- annex a - troubleshooting page a-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited 7. If a test fails, click on the corresponding help link to access detailed information and problem-solving procedures. 8. Click on test to check the problem is so...

  • Page 179: A.6 Restarting Your Router

    A- annex a - troubleshooting f@st 4310 reference manual page a-7 sagemcom broadband sas document. Reproduction and disclosure prohibited a.6 restarting your router we recommend that you restart your router if you notice that the router does not operate properly. To restart your router, use one of th...

  • Page 180: A.8 Offline Mode

    A- annex a - troubleshooting page a-8 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited a.8 offline mode to start configuring the router in http mode, the browser opens, the default ip address of the router's lan interface appears in the browser's add...

  • Page 181

    F@st 4310 reference manual page b-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex b - warnings for safety this section covers • warnings for safety § b.1 • ec compliance declaration § b.2.

  • Page 182: B.1 Warnings For Safety

    Annex b - warnings for safety page b-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited b.1 warnings for safety the router is in compliance with standard en 60950 ed december 2001. The safety levels in the sense of this standard are as follows: b.1.1...

  • Page 183: Annex C - Environment

    F@st 4310 reference manual page c-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex c - environment this section covers • directive e 2002/96/ce § c.1.

  • Page 184: C.1 Directive E 2002/96/ce

    Annex c - environment page c-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited c.1 directive e 2002/96/ce environment. Preservation of the environment as part of a sustainable development logic is an essential concern of sagemcom. Sagemcom aim is to...

  • Page 185

    F@st 4310 reference manual page d-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex d - technical characteristics this section covers • mechanics and display § d.1 • the characteristics of the different interfaces § d.2 • environmental characteristics § d.3 • the applic...

  • Page 186: D.1 Mechanics; Display

    Annex d - technical characteristics page d-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited d.1 mechanics; display mechanical characteristics dimensions (mm) width: 175 mm depth: 144 mm thickness: 65 mm weight of router 268 g display marking abbrev...

  • Page 187

    Annex d - technical characteristics f@st 4310 reference manual page d-3 sagemcom broadband sas document. Reproduction and disclosure prohibited d.2 characteristics of the different interfaces adsl / adsl2 / adsl2+ interface standards supported • g.992.1 (adsl), g.992.3 (adsl2), g.992.5 (adsl2+) • g....

  • Page 188

    Annex d - technical characteristics page d-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited wireless interface standard • ieee 802.1b/g1n frequencies band • 2412 mhz to 2472 mhz (ism band) transmission rate • up to 300 mbit/s safety • wep 64 / 128 ...

  • Page 189

    Annex d - technical characteristics f@st 4310 reference manual page d-5 sagemcom broadband sas document. Reproduction and disclosure prohibited d.3 environmental characteristics climatic and mechanical environment storage • ets 300 019-1-1 category t1.2 transport • ets 300 019-1-2 category t2.3 oper...

  • Page 190

    Annex d - technical characteristics page d-6 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited d.4 application and protocols ip characteristics tcp-ip, udp, icmp, arp • server, relay dhcp • relay dns routing (lan et wan) • static nat / pat • rfc 1631 ...

  • Page 191

    Annex d - technical characteristics f@st 4310 reference manual page d-7 sagemcom broadband sas document. Reproduction and disclosure prohibited configuration http • lan or wan port (with specific option) management • from eth and wan (with specific option) downloading of version • client by http mod...

  • Page 192

    Annex d - technical characteristics page d-8 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited.

  • Page 193

    F@st 4310 reference manual page e-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex e - default configuration this section covers • the default username and password § e.1 • the default configuration for the local network (lan) § e.2 • the default configuration for the ...

  • Page 194

    Annex e - default configuration page e-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited this section details the values of the default parameters of your f@st 4310 when it leaves the factory. These default parameters can be modified by a particular...

  • Page 195: Annex F - Glossary

    F@st 4310 reference manual page f-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex f - glossary.

  • Page 196

    Annex f - glossary page f-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited glossary. Acl access configuration list acs auto configuration server adsl asynchronous digital subscriber line ap access point arp address resolution protocol cc continuity...

  • Page 197

    Annex f - glossary f@st 4310 reference manual page f-3 sagemcom broadband sas document. Reproduction and disclosure prohibited l2tp layer 2 tunneling protocol lan local area network lcp link control protocol llc logical link control mac medium access control mdi media dependent interface mer mac enc...

  • Page 198

    Annex f - glossary page f-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited sndcp sub network dependent convergence protocol snap subnetwork attachment point snmp simple network management protocol soap simple object access protocol ssid service set...

  • Page 199

    F@st 4310 reference manual page g-1 sagemcom broadband sas document. Reproduction and disclosure prohibited annex g - connector technology this section covers • pinouts of the line connector § g.1 • pinouts of the pwr connector § g.2 • pinouts of the lan1, lan2, lan3 and lan4 connectors § g.3.

  • Page 200

    Annex g - connector technology page g-2 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited g.1 pinouts of the line connector the equipment is connected to adsl using a rj11 fixed connector (6 pins). Contact n° signal meaning 3 line-a line a signal 4 li...

  • Page 201

    Annex g - connector technology f@st 4310 reference manual page g-3 sagemcom broadband sas document. Reproduction and disclosure prohibited g.2 pinouts of the pwr connector the mains unit is connected to the equipment using the miniature fixed connector of the case. Contact n° signal meaning intérieu...

  • Page 202

    Annex g - connector technology page g-4 f@st 4310 reference manual sagemcom broadband sas document. Reproduction and disclosure prohibited g.3 pinouts of the lan1, lan2, lan3 and lan4 connectors the ethernet interface is connected to the equipment using a rj45 fixed connector (8 pins). Contact no si...

  • Page 203

    Sagemcom broadband sas headquarters: 250, route de l’empereur 92848 rueil-malmaison cedex - france tel : +33 (0)1 57 61 10 00 - fax : +33 (0)1 57 61 10 01 www.Sagemcom.Com all right s reserved. The information and specifications included are subject t o change without prior notice. Sagemcom broadban...