Sagetech Clarity User Manual - Magnetic Heading
Clarity/Clarity SV User’s Manual 20
Sensor Saturation AHRS Reset
During extreme turbulence, the sensors used in
Clarity SV’s AHRS may exceed limits, triggering
Sensor Saturation AHRS Reset for about 20
seconds, during which the AHRS light flickers.
While the AHRS light flickers, keep Clarity SV still
or fly straight and level.
The Pitch setting used during Sensor Saturation
AHRS Reset is zero degrees. If the automatic
Sensor Saturation AHRS Reset does not give
satisfactory results, perform a Wings Level AHRS
Reset using the Power Button or from your app.
Magnetic Heading
Magnetic heading displayed by Clarity SV is
significantly affected by your environment. The
earth’s magnetic field is skewed by magnets,
electrical current and ferrous materials. Your
aircraft compass has been carefully installed and
compensated for these effects. Because Clarity
SV is a portable device, some errors are to be
expected. You can minimize these errors by
keeping Clarity SV away from nearby magnets,
electronic equipment, and ferrous materials.
Note that the iPad has strong magnets
embedded along its edge to attach screen
covers.