Moving wash 1200 (pf09014) moving head projector user’ s manual release 1.0 this manual must be considered an integral part of the projector..
1 before connecting and using the projector, it is important to read carefully all the instructions in this manual. Qualified personnel only, in compliance with all the security laws, can do the installation, the maintenance and the utilisation of this projector. Before connecting the projector, mak...
2 general description technical features and dimensions voltage rating 230 v rated current 7,4 a frequency 50 hz maximum surface temperature 70º c distance from inflammable surfaces 2 mt weight 52,5 kg protection rate ip20 hmi 1200/s short discharge lamp, socket sfc 10-4 caution the projector cannot...
3 start-up procedures positioning and installation follow these steps for opening the package and installing the projector on its working position: · place the projector near the place it will be installed. · open the package and remove anchoring elements and accessories. · carefully read the instru...
4 when in doubt, consult a qualified electrician. Be careful with your operations. With a high voltage you can suffer a dangerous electric shock when touching the wires! Inside the projector, the ignitor circuit have very high voltage, over 5kv. The user must ensure that the power supply is provided...
5 special functions dip-switch function 1 – 2 – 3 – 4 off = pan/tilt 8/ bit resolution on = pan/tilt 16 bit fine resolution 5 off = standard configuration of pan direction on = invert pan direction 6 off = standard configuration of tilt direction on = invert tilt direction 7 – 8 off = standard confi...
6 channel 1 = cyan white = 0 proportional 1 > 85 cyan 86 > 100 proportional 101 > 254 white = 255 channel 2 = magenta white = 0 proportional 1 > 85 magenta 86 > 100 proportional 101 > 254 white = 255 channel 3 = yellow white = 0 proportional 1 > 85 yellow 86 > 100 proportional 101 > 254 white = 255 ...
7 channel 8 = ovalizer no ovalizer = 0 proportional, from 0° to 360° 1 > 254 360° ovalizer = 255 channel 9 = zoom narrow beam 0 > 63 19,3° light frost 64 > 127 24,8° medium frost 128 > 191 27° heavy frost 192 > 255 30° channel 10 = cto correction warm filter 6000k day-light = 0 proportional 0 > 255 ...
8 maintenance caution safety guards, lenses, and filters must be replaced if they are visibly damaged to the point that they become ineffective (for example, if they have deep slashes or cuts). The lamp must be replaced if damaged, cracked, or deformed by the heat. Planned maintenance at user’s char...
9 m4 - cleaning attention cleaning must be carried out when the projector is cool, disconnected from the power supply, with the general power switch turned off, and the on/off switch on the rear panel switched off. Frequency it is recommended to clean the projector every two months to ensure efficie...
