Assembly & user instructions stainless steel 4kw table top patio heater these instructions are for your safety. Please read them thoroughly before use and retain them for future reference visit us at www.Uig.Biz assembly & user instructions stainless steel 4kw table top patio heater these instructio...
Parts supplied 1 base 1 2 base weight 1 3 decorative 1 cup 4 lantern 1 guard 5 lantern and 1 gas hose 6 parasol 1 7 upper 1 lantern guard 8 support pole 1 9 regulator 1 ref description illustration qty ref description illustration qty visit us at www.Uig.Biz parts supplied 1 base 1 2 base weight 1 3...
Tools required ( not supplied ) • spanner • philips head screwdriver before you start • check the contents of the box and make sure you have all the parts and fittings listed. If not, contact the helpline on 00 353 1 2873797 and we will be able to help you. Helpline hours 9am - 5pm monday to friday....
Assembly step 1 base weighted base plate support pole m6 x 32 bolt (a) m6 nut (b) hold weight into position from under side of base as shown. Fix support pole to base and weight using 3 fixing bolts nuts and washers provided (a,b,d). Secure bolt with nut and washers as illustrated. M6 washer (d) vis...
Assembly step 2 lower pole cap slide lower pole cap down pole and rest on base. Visit us at www.Uig.Biz assembly step 2 lower pole cap slide lower pole cap down pole and rest on base. Visit us at www.Uig.Biz.
Assembly step 3 slide lower guard over support pole lower guard lower guard support pole visit us at www.Uig.Biz assembly step 3 slide lower guard over support pole lower guard lower guard support pole visit us at www.Uig.Biz.
Assembly step 4 lantern and gas hose regulator feed the gas hose down through the support pole as illlustrated in the diagram. Using snap connector, connect the short gas hose to gas hose already attached to heater. Gas hose visit us at www.Uig.Biz assembly step 4 lantern and gas hose regulator feed...
Assembly step 5 to check patio heaters for leaks to be performed in a well ventilated area. Lie heater down on the floor as shown below. Confirm all control knobs are in the off position.Open the gas control valve on the bottle or regulator. Check for leaks by brushing a solution of 1/2 water and 1/...
Visit us at www.Uig.Biz assembly step 6 secure lantern to support pole with 3 screws provided. M4 screw (e) visit us at www.Uig.Biz assembly step 6 secure lantern to support pole with 3 screws provided. M4 screw (e).
Assembly step 7 slide lower guard up pole through slots in metal lip of lantern and rotate to secure in position as shown. Visit us at www.Uig.Biz assembly step 7 slide lower guard up pole through slots in metal lip of lantern and rotate to secure in position as shown. Visit us at www.Uig.Biz.
Place parasol into position aligning the three holes in the parasol with the three bolts in the burner head and secure with 3 m6 nuts. Ensure lower guard wire extensions are located in parasol outer rim holes. Assembly step 8 parasol m6 nut (b) wire extensions outer rim parasol visit us at www.Uig.B...
Assembly step 9 upper guard place upper guard onto parasol and secure with 3 dome head nuts provided. (see fig.A) (fig.A) m6 dome head nut (c) visit us at www.Uig.Biz assembly step 9 upper guard place upper guard onto parasol and secure with 3 dome head nuts provided. (see fig.A) (fig.A) m6 dome hea...
Leak testing • to be performed in a well ventilated area. • confirm all control knobs are in the off position. • open the gas control valve on the bottle or regulator. • check for leaks by brushing a solution of 1/2 water and 1/2 soap over the gas system joints, including all valve connections, hose...
Use instructions before proceeding make sure you understand the warnings section of this manual. Lighting instructions: • turn on gas supply at cylinder. • push dial in and turn to position . • while dial is held pressed in at position , press spark button repeatedly to ignite the burner. • hold dia...
Warnings • this product is for outdoor use only • never use indoors, in an enclosed area or below ground level. • this appliance is intended for use with lpg bottled gas only. (a regulator of 37mbar for propane gas must be used.) • this appliance has been supplied with a propane regulator (only use ...
Technical data overall height: 960mm approximately. Overall width: 520 millimetres approximately. Heat input(qn): 4kw gas consumption: 288grams per hour at maximum setting. Injector size: 0.98mm setting pressure: 37mbar regulator outlet pressure: 37mbar ce approval: 0086 specifications are subject t...
