Summary of HP7K
Page 1
1 users manual hp7k hp7kx.
Page 2: Components
2 components your power wheelchair is shipped partially dissembled to protect it during shipping. After unpacking, please check whether you have received the following main components as our standard specification (see fig.1). 1. Main frame with motor 5.Armrest (left) 2. Captain seat 6.Armrest (righ...
Page 3: Safety Instruction
3 safety instruction operation of chair 1. Always ensure that the power is switched off when getting in or out of the wheelchair. This will eliminate the possibility of accidentally activating the joystick and causing injury to yourself or others. 2. Always check that the drive wheels are engaged (d...
Page 4
4 general 12. Always use a seat belt, and keep feet on the footplate at all the time. 13. For safety reasons, make sure that your weight does not exceed the recommended weight limit of the wheelchair. Consult your dealer for the specified weight limits for your particular model. 14. Do not attempt t...
Page 5
5 is. At this time, current technology is capable of providing at least 20 v/m of immunity level, which would provide useful protection against common sources of radiated emi. Following the warnings listed below should reduce the chance of unintended brake release or powered wheelchair movement that...
Page 6: Environmental Conditions
6 environmental conditions environmental conditions may affect the safety and performance of your power wheelchair. Water and extreme temperatures are the main elements that can cause damage and affect performance. A) rain, sleet and snow if exposed to water, your power wheelchair is susceptible to ...
Page 7: Assembly Instruction
7 assembly instruction 1.Installing the front light on the seat turn the seat (#2) over. Insert the front left light w/bracket (#8) on the seat frame. (see fig 2) insert the bolts and washer with the nuts into the holes of the seat frame. , then use the wrench and allen key to tighten the light fram...
Page 8
8 (fig 6) (fig 7) 3. Installing the footrest put the footrest set (# 3) connected tube (3 places) into the frame.(see fig 8) (fig 8) 4.Installing the footrest insert the footrest ( with left-#7 and right-#6 each) into footrest frame with side direction (see fig 9) then turn around 90 degree to corre...
Page 9
9 insert the 4pcs m6 bolts (with 2 washers each) into the hole and tighten the bolts and nuts. (see fig 10) . Use the e-clip to fix the footrest angle adjustment tube.(see fig 11) (fig 10) (fig 11) footrest angle adjustment tube 6.Installing controller and connect cables assemble the controller (#4)...
Page 10
10 (fig 14) plug-in anode by anode.
Page 11
11 adjustments for seating confort to maximize seating comfort, your power wheelchair lets you adjust: →armrest width →footrest angle →controller position →backrest angle →headrest height a. Armrest width adjustment → loosen the tension knob → slide the armrest frame to your desired width → tighten ...
Page 12: Operation
12 operation the power wheelchair is simple to operate. However , we recommend that you read carefully the following instructions to become familiarized with your new vehicle. A word of caution: before you turn the power on, always be aware of the environment that surrounds you to select your desire...
Page 13
13 ally and automatically for your safety. 3.Joystick the joystick controls the direction and speed of your vehicle, pointing the joystick away from the neutral position,(center), will move the vehicle in the direction where the joystick is pointing. The farther away(forward/backward) the joystick i...
Page 14
14 free-wheeling is accomplished by turning the free-wheeling levers to the free-wheeling position.(see fig 17) (fig 17) warning ! →never free-wheel your power wheelchair on a slope. →never free-wheel the motors while operating your vehicle. →always remember to engage the motors before turning the p...
Page 15
15 (fig 18) the main circuit breaker monitors the electric current drawn from the battery. It is a safety feature built in your power wheelchair for your extra safety. When the batteries and motors are heavily strained (e.G., from excessive loads),the main circuit breaker will trip to prevent damage...
Page 16: Batteries & Charger
16 batteries & charger battery we recommend that you use deep-cycle batteries that are sealed and maintenance free for your power wheelchair. Both sealed lead-acid (sla) and gel cell are deep-cycle batteries and are similar in performance. Deep-cycle batteries are specifically designed to provide po...
Page 17
17 →disconnect the charger power cord from the wall outlet when the batteries are fully charged. (see fig 19) important! Do not use for voltage input except the specified. Make sure your present voltage input (110v or 220v) and adjust manually. (see fig 20) plug-in controller plug-in wall outlet (fi...
Page 18: Maintenance & Repair
18 maintenance & repair your power wheelchair is designed for minimal maintenance. However, like any motorized vehicle it requires routine maintenance. To keep your hp7c for years of trouble-free operation, we recommend you follow the following maintenance checks as scheduled. Daily checks 1. With t...
Page 19
19 t o inspect or replace the motor brushes: 1.Unscrew the motor brush caps. (see fig 21) 2.Remove the brushes. 3.Inspect the brushes for wear. (see fig 22) 4.Replace the brushes if necessary. New motor brush worn motor brush motor brush caps (fig 21) (fig 22) 2. Inspect the state of the battery ter...
Page 20
20 note: the following symptoms could indicate a serious problem with your power wheelchair. Contact your local dealer if any of the following arises: 1. Mot or nois e 2. Fra yed har ness es 3. Cracked or broken connectors 4. Uneven wear on any of tires 5. Jerky motion 6. Pulling to one side 7. Bent...