SAIKYO SCOM3216 User Manual - Install and Connect Tv

1

3

2

4

Install and Connect TV

TV ANT

FM ANT

TV signal output

Set your TV

1.Put your TV in a place that can bear the

    weight of the TV.

    To avoid danger, please do not assemble

    the TV near water or extreme heat(such

    as a furnace, light source,or candle.)

    Do not block the ventilation on the back

    of the TV.

Connect antenna and power

2.Connect the antenna cable to the RF 

    connection on the back of the TV.

   Plug the TV into the wall power outlet(

   AC120~  60Hz).

1

3

Turn on the TV

3.While in standby mode the power indication 

   light will be red.Press the power button on 

    the TV or remote control.The light will change

   to green.

Note:

Picture for reference purposes only.

2

TV Stand Installation Instructions

TV Stand Installation Instructions

1. Open the carton and remove the TV,

     accessories, and base.

2. To avoid injury to the TV, place the TV

     face down on a firm surface, covered

    with a soft cloth. Attach the neck to the 

    TV with the supplied screws.

3.  Attach the base to the neck with the

     supplied screws.

4. Note: Insufficient tightening or incorrect

     installation of the stand will not support

     your unit correctly, and could result in

     damage or injury from a tip-over.