SailCube Sailing Boat Owners/rigging Manual - page 4
of
9
3.
Useful Knots
Bowline Loop:
Figure of 8 Stopper Knot:
Square Knot:
4.
SailCube Assembly Tools Required
1 x medium size flat blade screwdriver
1 x medium size Pozi blade screwdriver (PZ2 ideally)
1 x 7mm or 9/32” spanner or adjustable spanner
5.
Safety
Your SailCube has two hatches and one drain bung, these MUST all be checked to ensure tightness and correct fit prior to sailing.
The hatches are located either side of the mast deck plate.