Sailfish 220 WAC Owner's Manual - Sailfish 220 Wac
05/30/2017
Sailfish220WACOwner’sManual|sailfishboats.com 21
Freshwater Washdown and
Shower System
The freshwater washdown and shower system on your Sailfish Boat is
powered by a Shur-flo Pro Blaster Pump which creates a pressurized system,
once the pump is turned on and pressure is created throughout the freshwater
hoses; once they are all pressurized the pump will shut down until more
pressure is needed.
All of the freshwater systems on the boat will operate on this system once the
freshwater switch is engaged.
You should allow a few seconds for the system to prime and pressurize before
attempting to use any of the showers/sinks ect.
The freshwater holding tank is located behind the fuel tank in the bilge area.
The fill for this tank is located under the cutting/measuring board on the port
side of the vessel. The freshwater pump can be accessed through the bilge
access door in the aft of the vessel.
Sailfish 220 WAC
Key
Description
1
Freshwater Fill
2
Freshwater Shower
q
w