What’s in the box?
How to install the VHF on desktop and overhead
INSTALLATION GUIDE
SAILOR 6249 VHF Survival Craft
Dimensions for hand microphone - how to install the cradle
U-Mounting
Bracket
Gasket
Flush Mount
Bracket (2 pcs.)
Fuse
6.3x3.2mm
(10AT)
Cradle
Wheel Knob
(2 pcs.)
Screw M4x45
TORX 20
(5 pcs.)
Square Nut
M4x7x2.2
(5 pcs.)
Screw M4x12
TORX 20 (3 pcs.)
Screw ø3.9x19
TORX 20 (3 pcs.)
Screw M4x12
TORX 20
(5 pcs.)
Screw ø3.9x19
TORX 20
(5 pcs.)
Hand
Microphone
Very important information!
Do not remove the membrane.
If you remove the membrane the
radio will not be waterproof.
How to install the VHF flush mount
Cap for LTW
RJ45
Connector
Cap for LTW
BD/BU
Connector
(3 pcs.)
Fuse
6.3x3.2mm
(10AT)
Screw M4x12
TORX 20 (4 pcs.)
Screw ø3.9x19
TORX 20 (4 pcs.)
SAILOR 6090
Power Converter
User
Manual
Power
Cable
Transceiver
Tilting ±20°
99-129296
2 x M4 or hole for
self-tapping ø3.9
34
.6mm
46.8mm
28.5mm
Scale 1:1
IMPORTANT!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
How to prevent water ingress
Connector for Hand Microphone or Handset - If not used, put the cap
from the ACC connector on the front connector to prevent water ingress.
Dimensions for the VHF