Sailor SP3911 User Manual - Introduction
Manual is about: 14 hour standard charger
of
10
1
SP3911
Introduction
This charger is constructed solely to charge 7.2V
Nickel Cadmium batteries made for the maritime
portable VHF/UHF radio manufactured by ECI.
The charger has two charging position. The front
position is designed for a portable radio mounted
with a battery.
The rear charging position is not normally
connected, and is employed as a storage for a
spare battery or an emergency battery.
1. Connect the charger to a 230V AC source.
2. Switch on the charger by pressing down on the
ON/OFF switch thereby conducting voltage to
the automatic charger.
3. Insert the battery-mounted radio in the front
charging position. The radio must be switched
OFF during the charging time.
4. Press the CHAR switch downwards to start the
charger and the 14 hour timer.