Summary of CGW 1.20.1 115V
Page 1
Cgw operating instructions.
Page 2
2.
Page 3: Declaration Of Conformity
3 the undersigned manufacturer: saint-gobain abrasives s.A. 190, bd j.F. Kennedy l- 4930 bascharage declares that this product: masonry saws: cgw 1.30.1 230v cgw 1.30.1 230v + blade cgw 1.20.1 115v code: 70184629851 70184629858 70184630481 is in conformity with the european machinery directive 2006/...
Page 4
4.
Page 5: Cgw
5 cgw operating instructions and spare parts list 1 basic safety instructions 6 1.1 symbols 6 1.2 machine plate 7 1.3 safety instructions for particular operating phases 7 2 machine description 8 2.1 short description 8 2.2 purpose of use 8 2.3 layout 8 2.4 technical data 10 3 assembly and commissio...
Page 6
6 1 basic safety instructions the cgw is exclusively designed for the cutting of construction products mainly on construction sites. Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any resulting d...
Page 7
7 1.2 machine plate important data can be found on the following plate located on the machine: 1.3 safety instructions for particular operating phases before commencing work • before commencing work, make yourself familiar with the working environment at the place of use. The working environment inc...
Page 8
8 2 machine description any modification, which could lead to a change in the original characteristics of the machine, may be done only by saint-gobain abrasives who shall confirm that the machine is still in conformity with the safety regulations. 2.1 short description the cgw masonry saw is design...
Page 9
9 frame and feet (1) the frame is made of a jig-welded reinforced steel construction to ensure perfect rigidity. 4 removable legs fit into housings welded on frame sides and locked into place with wing screws. Cutting head (2) spring loaded jig-welded steel console. The motor fixing points and the p...
Page 10
10 2.4 technical data electric motor 2,2 kw 230v with thermal overload protection 1,5kw 115v with thermal overload protection electric motor protection ip54 max. Blade diameter 350 mm bore 25,4 mm rotation speed of the blade 2800 min -1 flange diameter 90 mm cutting depth mm 110 mm (without reversin...
Page 11
11 3 assembly and commissioning the machine is delivered fully equipped (although without diamond blade). It is ready for operation assembly the diamond blade, the feet and the conveyor cart and after connection to the appropriate power supply. 3.1 tool assembly only norton blades with a maximum dia...
Page 12
12 blade, as insufficient water supply may result in premature failure of the diamond blade. The water pump must never run without water. Always make sure that there is enough water in the pan and refill if necessary. In case of frost, empty the water cooling system from its water..
Page 13
13 4 transport and storing 4.1 securing for transport before transporting the machine, always remove the blade and empty the water pan. Also remove the conveyor cart, as it can be dangerous while you move the machine. 4.2 transport procedure two people are necessary to move the machine. The machine ...
Page 14
14 5 operating the machine 5.1 site of work 5.1.1 siting the machine • remove from the site anything, which might hinder the working procedure! • make sure the site is sufficiently well lit! • observe manufacturer's conditions for connecting to power supplies! • place electric cables in such a way t...
Page 15
15 5.2.2 multiple step cutting multiple step cutting consists of moving the conveyor cart with the material to be cut back and forward under the rotating blade, • place the material to be cut on the conveyor cart firmly against the guide-a-cut and the backstop, keeping the hands well away from the b...
Page 16
16 6 maintenance and servicing to ensure a long-term quality from the cutting with the cgw, please follow the maintenance plan below: b e g in o f th e d a y d u ri n g t h e c h a n g in g o f to o l e n d o f th e d a y o r m o re o ft e n i f re q u ir e d e v e ry w e e k a ft e r a f a u lt a f...
Page 17
17 7 faults: causes and cures 7.1 fault-finding procedures should any fault occur during the use of the machine, turn it off, and isolate it from the electrical supply. Any works dealing with the electrical system or supply of the machine can only be carried out by a qualified electrician. 7.2 troub...
Page 18
18 7.3 circuit diagram 230v 1ph.
Page 19
19 115v 1ph.
Page 20
20 7.4 customer service when ordering spare parts, please mention: • the serial number (7 digits). • the code of the part. • the exact denomination. • the number of parts required. • the delivery address. • please indicate clearly the means of transportation required such as "express" or "by air". W...
Page 21
21 guarantee can be claimed and technical support obtained from your local distributor where machines, spare parts and consumables can be ordered as well: benelux and france: from saint-gobain abrasives s.A. Free telephone numbers: belgium : 0 800 18951 france: 0 800 90 69 03 holland: 0 8000 22 02 7...
Page 22
22.
Page 23
23.
Page 24
24 saint-gobain abrasives s.A. 190, bd. John f. Kennedy l-4930 bascharage grand-duchÉ de luxembourg tel.: ++352 50 401-1 fax: ++352 50 16 3 3 e-mail: sales.Nlx@saint-gobain.Com http://www.Construction.Norton.Eu 07.11.2008.