Saitek Combat Rudder Pedals User Manual - Read Programming Manual.

be closed by clicking on the OK icon in the bottom right corner. You can get the tip box 

back by going to the support tab and clicking on SHOW STARTUP TIPS PAGE.

Product

The product page is the main screen that appears when the Smart Technology software 

is first opened (as shown above). Any Pro Flight hardware connected to your computer 

will be automatically detected and displayed on this screen. Since they are always first 

in the list of connected hardware, the Pro Flight Rudder Pedals will always appear in 

the software’s product page, although no Pro Flight hardware is physically connected to 

your computer.

ProGrammING

From the programming tab, you can mimic your controller to directly copy any of the 

keyboard commands that are used in your favorite games. The commands are then 

saved in what we call a Profile. When you click on the programming tab, you will be 

presented with a high resolution image of the controller you are going to program on the 

left, and going down the right side of the screen you will see a list of command boxes 

called “Cells.” For a detailed guide on the programming, go to the support tab and click 

READ PROGRAMMING MANUAL.

SuPPort

From the support tab, you can access the following features by clicking on them:

SHow tIPS

Once clicked, the tip screen will appear; this is the same screen that appears the   

very first time you run the ST software and you can run through all tips from this    

screen if desired.

13

ENGLISH