Saitek P2000 User Manual - page 3
Game Profiler Wizard
The Game Profiler Wizard allows you to download game profiles for your favorite games from
either the Saitek Product Companion CD or the Saitek Website. These are profiles written by
our in-house gamers to help you get the most from you new Saitek controller in as little time
as possible. To run the Game Controller Wizard, follow these simple instructions:
After you have completed testing your Saitek P2000, you will then be asked to run the
Game Profiler Wizard, click on Yes to proceed.
At the Welcome dialog box you will be prompted to Import the Game Profiles for your
controller via either the Internet or the CD. Check the box next to CD and click on
Continue. The software will scan your computer for those games you already have
loaded and will load the corresponding profiles.
When the Game Profiler Wizard has completed loading the profiles, click on Next and
then Finish. Your Saitek P2000 is now ready for gameplay.
Important Notice: If you connect the P2000, using the USB connector, before installing the
Saitek Gaming Extensions software, the Saitek P2000 will not operate correctly. To solve this
problem, run the NukeUSB utility (found on the Saitek Product Companion Disc CD) to
remove the P2000 from the Registry, restart the machine and then continue the installation as
detailed above.
Note: To avoid potential problems and conflicts, it is recommended that you remove any other
game controllers from the Game Controllers dialog box. Do this by selecting the previously
installed controller in Game Controllers and clicking on Remove.
SAITEK P2000 FEATURES
Switching Between Digital and Analog Modes
The Saitek P2000 comes with an Analog Stick for increased precision, performance and
playing power. Simply select the
Analog Mode
for complete control in driving and flying
games or any game where accuracy in movement is crucial.
Switch between Digital and Analog Modes by pressing the
Analog Button
for Analog Mode
and the
Digital Button
for
Digital Mode
. The LED next to each button will light up to indicate
what mode the pad is in. The power-up default setting is Analog Mode.
Using the P2000 in Analog Mode
In Analog Mode, the Analog stick becomes active with the D-Pad functioning as a hat switch.
Using the P2000 in Digital Mode
In this mode, the Saitek P2000 works as a standard digital gamepad.
Tilt Function
The Tilt function on the Saitek P2000 is a feature that allows the user to perform the left/right
and forward/backward functions by tilting the pad in the relevant direction. The power-up default
setting for Tilt is ON.
To enable/disable the Tilt Function press the Tilt Button. When the gamepad is in Tilt Mode,
the Tilt LED will light up.
Changing the Tilt Settings
The Tilt Settings can be altered from the factory default to suit your own gaming preferences.
However, it is recommended that you play a game for a while before making any changes to
these settings. If after playing for a while, the gamepad does not behave the way you want it to,
then proceed with making the changes.
Note: The default zero setting (no movement in any direction) for the Tilt setting on the P2000
is with the pad held in such a way that the top plate is level (horizontal).
To activate the Tilt Set Mode, press the Tilt Button for longer than three seconds until the Tilt
LED flashes continuously. This will allow you to:
• Increase and decrease the range of Tilt (Tilt Sensitivity)
• Set the center or zero position of the Tilt
• Restore the factory default settings
• Save the new Tilt settings
ENGLISH
5 6
DIGITAL LED
ON
MODE
DIGITAL
ANALOG STICK
N/A
D-PAD
FUNCTIONS AS
D-PAD
ANALOG LED
ON
MODE
ANALOG
ANALOG STICK
FUNCTIONS AS
ANALOG STICK
D-PAD
FUNCTIONS AS
HAT SWITCH