Saitek Pro Bridge 310 User Manual - 4. Cable Connection
10
10
3. Switch both computers on.
If your Pro Bridge 310 or 510 are already
switched on and connected, switch off and
switch on again before attempting to link the
computers.
4. To start the electronic link:
On Pro Bridge 510:
4.1 Press ESCAPE until the first menu PCLSD
appears on the LCD. Move
cursor under C
(change setting), press ENTER.
4.2 Pro Bridge 310 always plays South and is
always operated by a human player.
appears on the LCD. If you are playing on
your own, check that North, East and West
are computer players. If more than one
person is playing, change North, East or
West to a human player, as required, (see
5.1 of Pro Bridge 510 manual).
4.3 To start up the electronic link , go to the
setting menu as in 4.2. With
cursor under
4. CABLE CONNECTION
4.1 Introduction
4.2 Connecting Pro Bridge 310 to Pro Bridge
510
Included with every Pro Bridge 510 (and Pro
Bridge 500 upgrade kit) is a cable to connect
Pro Bridge 310 to Pro Bridge 510.
1. Switch off both computers.
2. Connect Pro Bridge 310 to Pro Bridge
510 using the cable (see diagram).