1. DL manuals
  2. Saito
  3. Battery Charger
  4. ProCharger S
  5. Operating Instructions Manual

Saito ProCharger S Operating Instructions Manual

Summary of ProCharger S

  • Page 1

    Operating instructions read carefully before start up! Order no. 10004601.

  • Page 2: Saitoprocharg Ers

    The saito prochargers is an automatic plug-in charger for motorcycle, scooter and quad bike/atv starter batteries. It is adjustable between 2 v, 6 v and 12 v by means of a sliding switch and suitable for all customary standard lead-acid batteries – meaning all batteries included in the louis assortm...

  • Page 3: Prominent Features:

    Prominent features: • charging current up to 0.4 a • automatic adjustment of the charging current (i-u charging principle) • for 2 v, 6 v and 12 v lead batteries • electronic protection against short circuits and polarity reversal • trickle charging (ideal for winter storage) • battery may remain pe...

  • Page 4: Included In The Delivery

    Saito prochargers plug-in charger, cable set with crocodile clips for quick connecting, cable set with ring terminals (eyelets) for a permanent con- nection to the battery as well as a detailed, german and englisch instruction manual. Included in the delivery 4.

  • Page 5: Content

    Intended use 6 warning and safety information 7 dangers 9 safety 12 failure information 15 connection and start-up 16 short explanation for experienced users 17 charging process 18 error display, technical data and scope of delivery 20 warranty 21 information on environmental protection, packaging a...

  • Page 6: Intended Use

    Intended use the charging device is intended for charging and maintaining the charging of customary standard lead-acid batteries as well as all maintenance-free gel and microfleece batteries suitable for the voltage and charging current stated within the technical data. No primary batteries (zinc-ca...

  • Page 7

    Warning and safety information before using the device, refer to the instructions within this manual. The legislator requires us to provide you with important information for your safety and to notify you about how to avoid damaging of the device and other facilities. The manufacturer is not liable ...

  • Page 8

    Keep the charging device out of children’s reach. Make sure not to wear any conductive jewellery such as chains, arm- bands or rings while using the charging device. Avoid getting in contact with battery acid. Battery acid can lead to severe chemical burn! In case you have been exposed to battery ac...

  • Page 9: Notice 1.1

    Dangers in handling the charging device the charging device has been developed according to the state-of-the- art and approved safety-related guidelines. Nevertheless, in the case of operating errors or misuse, there is a risk of danger for: • the user’s or third party’s health and life • the chargi...

  • Page 10: Dangers

    Please contact an authorised service centre, if you have any doubts concerning the functioning, safety or the connection of the device. Check the product and its cables for damages before any start-up. Do not operate the device, if the protective insulation of the power or charging cable is damaged ...

  • Page 11: Notice 1.2

    Notice 1.2 if a defect (damaging) of the cable is identified, the operation must be immediately stopped. Only operate the device outside the vehicle. Always assure a safe and stable connection when attaching the battery charging clips. Attention! Do not continue the charging process with a defective...

  • Page 12: Safety

    Do not place any containers, e.G. Vases, plants or the like on top of or next to the charging device and the battery. Liquids could contaminate the casing and thereby affect electric safety. There is a great risk of fire or fatal injury from electric shock. In this case, immediately remove the pro- ...

  • Page 13: Safety

    Only operate the product in a moderate climate, never in a tropical climate. Refer to the chapter “technical data” (see page 26) for admissible environmental conditions. Make sure that the charging device is firmly attached to the power socket. There might otherwise be a danger of injury due to the ...

  • Page 14: Safety

    There are no product parts for the user to set resp. To maintain inside the device. At schools, educational institutions, hobby and self-help workshops, the operating of the product must be supervised by responsible, trained staff. If you are not sure about the correct connecting resp. Operating or ...

  • Page 15: Failure Information

    Failure information if the device does not function, check the following points: is the power socket working, does it conduct electricity? Is the connected lead battery defective or exhaustively discharged? Has the charging device been connected to the lead battery with the right poles? In order to ...

  • Page 16: Connection and Start-Up

    Connection and start-up if the battery to be charged is built in, you must make sure that all current consumers of the vehicle, such as e.G. Ignition, radio, light, telephone, mobile charging devices etc., are switched off. The lead battery must be dismantled or disconnected, if applicable. Refer to...

  • Page 17: Light Up.

    Short explanation/quick guide for experienced users operating the device (all safety and danger notices must be read in advance). Adjusting the battery voltage: depending on the battery you wish to charge, adjust the sliding switch to 2 v, 6 v resp. 12 v. Connecting to the 230 v mains: connect the c...

  • Page 18: Charging Process

    Charging process the yellow “charging” display will light up as soon as the flow of charging current starts. If however the red “reversely poled” display lights up, immediately check and change the polarity of the pole clips. The time until charging end voltage is reached depends on several paramete...

  • Page 19: Charging Shut-Down

    For the charging operation itself it does not matter whether the battery is only partly or completely discharged. The battery can also remain permanently connected to the charging device; however the surrounding temperature should not exceed approx. 40°c! If the battery is connected to the charging ...

  • Page 20: Error Display

    Error display, technical data & scope of delivery error display the “polarity reversal” led lights up: the battery was reversely poled and connected to the charging device. Technical data operating voltage: 220-240 v ˷ , charging current: up to 0.4 a max. Temperature range for the application: -10°c...

  • Page 21: Warranty

    Warranty warranty the dealer/manufacturer selling the device provides a warranty of two years as from the handover of the product with respect to the material and the production of the device. In the case of a defect, the purchaser is only entitled to supplementary performance. Supplementary perform...

  • Page 22: Packaging

    Information about environment protection at the end of its service life this product may not be disposed via the normal domestic waste, but must be handed in at a collecting point for recycling of electric and electronic devices. This is indicated by the symbol on the product, the instruction manual...

  • Page 23: Questions About The Product

    Information about environment protection, packaging, cleaning questions about the product 23 example for use if you have any questions on the product and/or this instruction manual, please contact our technics centre at the fax number: 0049 (0) 40 – 73 41 93 58 resp. By email: technikcenter@louis.De...

  • Page 24: Delo®And Saito®

    • optimal starting power • very long life • incl. High-performance pole grease • producer certified according to iso 9001 • very cost-effective due to bulk purchase • oem quality for more than 25 years – proven millions of times • enormously high service life • very high cold start performance • abs...