SAJ Suntrio-TL Series User Manual - page 35
User Manual
32
User Manual
6.2 Startup the Inverter
Suntrio inverter can be configured for various countries, if it is the first time the inverter starts
up after installation, LCD will quickly switch to and stay at the country setting interface. Only
the inverter is set to comply with a certain country, it will work and display normally. Otherwise,
LCD will always stay at the “Please Set The country First” interface.
There are 28 countries for choosing
1
Australia
15
Italy
2
Austria
16
Portugal
3
Belgium
17
China
4
Brazil
18
Thailand
5
Denmark
19
Default
6
Finland
20
Hungary
7
France
21
Croatia
8
Luxembourg
22
Czech Republic
9
Netherland
23
Germany
10
Norway
24
Israel
11
Poland
25
Greece
12
Sweden
26
Malaysia
13
Switzerland
27
New Zealand
14
UK
28
Spain
Note: if you can’t find the country you want, please directly select ‘Default’.Default mode
represent the VDE 0126-1-1.
After Country configuration, Inverter will have a self-check when starting up. If no malfunction
is found and grid connection requirement is met, inverter LCD will go to the countdown screen,
as shown in Figure 6.2.