Salamander D2/367A Assembly Instructions Manual

Summary of D2/367A

  • Page 1

    Salamander 6 bay av credenza 503-232 [5.17] page 1 of 8 6 bay av credenza d2/367a assembly instructions.

  • Page 2: Hardware

    Salamander 6 bay av credenza 503-232 [5.17] page 2 of 8 hardware c i g a h b j m e id part # description a 303-453 1/4-20” x 4” head socket screw b 300-518 1/4-20 x 3/8” button head socket screw c 300-485 1/4-20 x 1/2” button head socket screw d 300-455 1/4-20 x 1” head socket cap screw e 300-465 1/...

  • Page 3: Warnings

    Salamander 6 bay av credenza 503-232 [5.17] page 3 of 8 warnings important safety instructions read all instructions before using this furnishing warning! Failure to comply with these instructions may result in accident involving serious personal injury. Failing to follow these instructions can resu...

  • Page 4: 1.   Unify Cabinets

    Salamander 6 bay av credenza 503-232 [5.17] page 4 of 8 1. Unify cabinets align the top and bottom thru holes located on the front and back vertical cabinet extrusions. Bolttogetherasshownwithscrew(a),washers(g)andlocknut(h). G a g h warning! This step requires two people.

  • Page 5: 2.  Level Cabinet

    Salamander 6 bay av credenza 503-232 [5.17] page 5 of 8 warning! This step requires two people. 2. Level cabinet wood block foot lift cabinet and adjust leveler by hand. Leveler jam nut leveler foot loosen jam nut with supplied wrench and tighten to the locked position..

  • Page 6: 3.   Install Shelves

    Salamander 6 bay av credenza 503-232 [5.17] page 6 of 8 3. Install shelves insert into post channel and slide to desired height. Level shelf by adjusting shelf peg positions and tighten screw using hex key. Note: drop-in nut must make a 1/4 turn in post. Assemble loosely as shown. E m i drop-in nut ...

  • Page 7

    Salamander 6 bay av credenza 503-232 [5.17] page 7 of 8 plug in power supply plug in ac adaptor bottom center behind fan grill. Attach thermistor 4. Install rear cooling panel install rear cooling panel squeeze in the provided handled slots and pull outward until panel is free. Note: reverse step fo...

  • Page 8: Adjustment Tips

    Salamander 6 bay av credenza 503-232 [5.17] page 8 of 8 adjustment tips main adjustment (side to side and up/down) adjustment is made by turning screw (a) in and out. Dismount hinge from hinge plate with one hand holdingthedooropen,pull back on the hinge quick-release lever (b). Door front adjust th...