Salamander Stoves Hobbit 0901 Installation And Operating Instructions Manual - page 3
5
3 – Assembly of the Hobbit Stove
The stove is supplied with the flue collar fitted to the top. If the installation requires the flue
to exit from the rear of the stove, swap the collar for the blanking plate on the back before
assembling the firebox as described below.
3.1
Lay the stove carefully on its side
and attach one leg to each corner of
the base using the bolts and
washers. Carefully lift the stove
back upright to rest on its feet.
3.2
Check that the grate and grate
centre is located correctly and
sitting horizontal in the stove. Check
the riddling mechanism operates
and moves freely.
3.3
Picture shows how the back and
side air boxes and baffle locate
together when installed in the
firebox.
3.4
Build the firebox inside the stove by locating first the rear air box. then the baffle.
then the left air box, followed by the right air box. The weight of the baffle holds
the assembly together.
6
4 – Components of the Hobbit Stove
The Hobbit
GRATE RIDDLING
SECONDARY
FIREBOX DOOR
ASHPAN DOOR
PRIMARY
LEVER
AIR CONTROL
AIR CONTROL