Salcom 11-08-0000 User manual

TM

11-08-0000

MULTI-STATUS

ALARM TRANSMITTER

User’s Manual

Sea Air and Land Communications Ltd, 120 St Asaph Street, Christchurch, New Zealand

SALCOM 11-08 MULTI-STATUS ALARM TRANSMITTER          USER'S HANDBOOK 

ISSUE 1108UA 07/94

Sea Air & Land Communications Ltd.

Page 2

SALCOM 11-08

MULTI-STATUS ALARM TRANSMITTER

DESCRIPTION The 11-08 eight input alarm transmitter operates as a one way alarm

control signalling system. It has an internal tone sequential encoder

interfaced to an on-board 160mHz FM 0.5 watt transmitter. The 11-08

is normally used with an associated Salcom SR160 receiver and  a

suitable decoder such as the Sigtec P1310NTC or T2160.

The encoder is field programmable and can be tailored to many

applications where one way signalling meets the system criteria.  Some

examples are:

! Remote control of pumps and indication of pump status.

! Water level alarming in association with pump control.

! Security alarm and monitoring.

Features

:  The features  provided in the 11-08  include:

! Low  Power consumption

- 7 milliamps (typ.)

! Multiple Address Codes 

- 4 available of 16 tones

! Multiple Signalling Fomats

- 5 tone, 5 tone+status and 11 tone.

! Supports 2 Tone Sets

- CCIR & EIA

! Individual Switch debounce  

- Fully field programmable 

! Two Individual Poll Timers

- Fully field programmable

! Four Substitute tones 

- Fully field programmable

! Able  to force read the current state of all input switches

! Fully field programmable

- EEROM (thru serial adpt)

! Random retry timer

- 0 to 6.4 seconds

! Enable random timer on any or all switches

! Switch Power-up mask

- Fully field programmable 

! Switch Input phase

- Fully field programmable 

! Disarm ALL inputs

- To allow maintenance

! On board CPU Cop

- Internal CPU watchdog

! Lead-in-Delay

- Fully field programmable 

! Retry Timer

- Fully field programmable 

! Input Designated to cancel Retry timer.

! Twin Internal Low Battery Detector.