Salcom 11-22-0000 Operator's Manual - page 3
11-22-0000 SYNTHESIZED VHF TRANSMITTER OPERATOR’S MANUAL
Issue 0198
11-22-0000 SYNTHESIZED VHF TRANSMITTER OPERATOR’S MANUAL
Issue 0198
Sea Air and Land Communications Ltd
Page 3
Sea Air and Land Communications Ltd
Page 4
10.0 WARRANTY: Our Products are warranted for a period of 12 months from date of purchase
against faulty materials and workmanship. Should any fault occur the unit should be returned
to the Vendor, freight pre-paid. Please include a brief description of the fault to assist with
prompt return. Any unauthorized alterations or repairs will invalidate the warranty.
10.0 DISCLAIMER: All information provided in this document is carefully prepared and offered
in good faith as a guide in the installation, use and servicing of our products. Installers must
ensure that the final installation operates satisfactorily within the relevant regulatory
requirements. We accept no responsibility for incorrect installation. We reserve the right to
change products, specifications, and installation data at any time, without notice.
SPECIFICATIONS
Frequency Bands
138-156MHz , 148-165MHz,
Type of Emission
FM ±5kHz (* ± 2.5kHz) deviation
1
25kHz (* 12.5kHz)
channel spacing
1
Power Output
50mW to 4W variable
Power Requirements
13.5V nominal, operates 10V to 15.5V
Transmit: 750mA typ @ 4W Output Power
900mA max, 13.5V
Standby: 3mA (LED current)
Modulation
Deviation: ±5kHz (* ± 2.5kHz) max.
1
Sensitivity:
TX1 30mV/10K
TX2 5mV/10K
CTCSS 300mV/2MO
Passband:
TX1,2 0.3-3kHz
CTCSS 67-250Hz
Optional:
600O bal. TX1,TX2
Oscillator Crystal
9.6MHz
Stability
±5ppm -10
EC to 60EC
Synthesizer Lockup
50mSec
No of Channels
100 pre-programmable within 6MHz B/W
Spurious Outputs
-26dBm max.
Overtemp Protection
70
EC Transmitter Output
Transmit Enable
Ground ‘PTT’, 5mA source
Type Acceptances
Case Dimensions
140 x 106 x 32mm
Table 1:Switch settings table 00 to 49