Salcom 12-88-7000 Product Manual - page 11
P a g e
| 10
12-88-7000 OUTPUT CONTROL RECEIVER
Product Manual
Sea Air and land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
July 2017
Technical Specification
Power Supply
+10 V to 17 V nom 12 V
If relay operation is not required 4-17V can be used
RF Frequency
VHF: 148-165MHz
(Model No. 12-88-7150)
UHF: 440-470MHz (Model No. 12-88-7450)
Receive Bandwidth
6.25KHz (minimum)
Frequency selection method
Synthesized, user selectable
Current Drain
Receive average 25mA plus 18mA when relay energised.
Receive Baud Rates
512 or 1200 baud
Paging Protocol
POCSAG
Receiver Sensitivity
Approx -124 dBm
Serial input/output
9600 baud no parity, 8 data bits, 1 stop bit
for changing unit parameters)
Outputs
One relay and two open collector
Relay Contacts
1Amp @24VDC (Not suitable for 240VAC connection)
Open Collector Max Current
Outputs 2 and 3 can sink up to 80mA each.
Aerial Connection
Internal PCB, or external SMA as required.
Operating Temperature
-10 to +50degC
Enclosure
Dimensions: 66mm x 50mm x 26mm (with mounting holes).
Material:
Plastic
Environmental Protection
Indoor use only