Salora LED1940DVX User Manual - Product Introduction

Product Introduction

4

Product Introduction

Front View

Rear View

MENU:

Display/exit the OSD menu.

TV/AV:

 Display the input source menu.

POWER:

Turn on/standby the TV set.

Remote Control window(keep clear)

LED indicator

(IR)

 Infrared Receiver: Receives IR signals from the remote control.

(Power on/Standby) 

LED indicator: Press 

POWER

 to turn on and off.

The effective receiving range for the signal is 5-8 metres from the front of the remote

control window, and 30

0

 to the left or right side and 20

0

 above or below the control 

window.

Indicator on(Red)                  Standby mode

Indicator on(Green)               Power on mode

Wall Mounting

The TV is provided with mounting holes for a VESA approved wallmounting bracket (NOT SUPPLIED). 

Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the 

basemounting bracket).Mount the VESA bracket using 4xM4x10mm ISO metric threaded screws (not 

supplied). Do not use screws longer than 10mm, it will occur damage to the internal parts. Fit the wall 

bracket securely following themanufacturers instructions.

EJECT:

 Eject the disc.

CH+/-:

 Scan through channels.

VOL+/-:

Adjust the volume.

 Play/pause the disc playing.

PLAY:

Connections

See next page