1. DL manuals
  2. Salter Brecknell
  3. Scale
  4. 7010SB
  5. User Manual

Salter Brecknell 7010SB User Manual

Summary of 7010SB

  • Page 1

    Salter brecknell weighing products 1000 armstrong dr fairmont, minnesota 56031 toll free 800-637-0529 · voice 507-238-8702 · fax 507-238-8271 email: sales@salterbrecknell.Com www.Salterbrecknell.Com june 2003 ©copyright 2001, 2002 salter brecknell weighing products models 7010sb pc interfaced postal...

  • Page 2

    Unpacking your scale carefully unpack and inspect the shipping container for evidence of shipping damage. If such evidence is discovered, stop unpacking and immediately notify the shipper to arrange to have the shipment inspected by an authorized representative. All damages must be promptly filed wi...

  • Page 3

    Technical support for technical support please contact us: via phone- 507-238-8702 or 1-800-637-0529 via fax – 507-238-8271 or 1-800-368-2042 e-mail- sales@salterbrecknell.Com 9 set-up instructions 1. Apply power to the scale by first plugging the round connector into the scale (see below), then plu...

  • Page 4

    Function keys the model 7010sb has three function keys to operate the scale. They are on/off (tare), wt hold, and lb-oz/ grams. On/off (tare) key: the on/off (tare) key performs three functions. First it applies power to the scale; second it tares the weight on the scale to zero; third it will turn ...

  • Page 5

    Scale calibration instructions periodically your scale may require calibration to ensure proper weighing. You will need a 10-pound weight to calibrate the scale. If calibration is performed with a weight other than 10 pounds, it will cause your scale to weigh inaccurately. Scale calibration is accom...

  • Page 6

    Trouble shooting symptom recommended action not weighing correctly or inaccurate weight. . . . . . . . . . . . Press “on/off (tare)” key, to zero the scale before placing an item on the scale. Or the scale may need re-calibration. See calibration instructions, page 5. Weight fluctuates . . . . . . ....