Salter Brecknell SPC Series Operation Manual

Summary of SPC Series

  • Page 1

    1 digital scale revision 1.0 august 17, 2000 contents subject to change without notice. Salter brecknell weighing products 1000 armstrong drive fairmont, mn 56031 tel (800) 637-0529 tel (507) 238-8702 fax (507) 238-8271 e-mail: sales@salterbrecknell.Com web: www.Salterbrecknell.Com..

  • Page 2

    2 warning use only the ac adapter which comes with the scale. Other adapters may cause damage. Internal service to this product should be performed by a qualified person only. There are no user serviceable parts inside. Caution avoid installing the scale in areas of direct sunlight and high humidity...

  • Page 3: Spc

    3 getting started 1. Plug the ac adapter into the scale first, then into an ac outlet. For portable operation, install one 9v alkaline battery (not included) in the battery compartment located underneath the scale base. 2. Place the scale on a stable and firm table or floor. 3. If you are using the ...

  • Page 4

    4 operation / continued how to enable or disable the automatic turn off function: when the automatic turn off function is enabled, the scale will automatically shut itself off to pre- serve battery life after two minutes of inactivity. Note: when the scale is shipped from the fac- tory, the automati...

  • Page 5

    5 specifications construction: housing: abs sub-platform : metal platter : metal feet : non-skid hard rubber display: 4 digit, 7-segment lcd keypad: 4-key tactile keypad over capacity annunciation: 103% of full scale capacity serial port: full duplex, rs-232, female dsub9 operating temperature range...

  • Page 6

    6.