Salton Elite SFF 18 User Manual - page 3
3
FAN INSTALLATION INSTRUCTIONS
Your Salton Elite Floor Fan has been boxed unassembled to minimize packaging
waste. Each part fits together easily and can be later removed for cleaning, and
storage. Assemble the SFF18 as follows:
OPERATING INSTRUCTIONS
Your Salton Elite Floor Fan control has three speed settings. The various speed
settings assist in regulating the airflow from the fan and can be turned to the right or
left hand side of the ‘0’. :
1. Number One – For low speed and air circulation
2. Number Two – For medium speed and air circulation
3. Number Three – For high speed and air circulation
In the number three position the SFF18 can be turned 45
to generate air flow to the
entire room and not just in the direction aimed at.
CLEANING
1. Before cleaning, always ensure the fan is switched off and disconnected from
the electrical socket.
2. Wipe off dust and dirt with a warm moist cloth and then buff with dry cloth.
3. Do not immerse the fan in water or other fluids.
SERVICE
Hints before returning the fan:
Problem
Possible Cause
The fan does not work
Check that the unit is plugged in, and that the power is turned on.
Are all required switches in the on position?
Is the cord, or plugged damaged?
DUE TO ONGOING IMPROVEMENTS, PRODUCTS MAY CHANGE SLIGHTLY
FROM THOSE SHOWN ON THE PACKAGING.
If service should become necessary within the warranty period, the appliance should
be returned to an approved
TEDELEX TRADING (PTY) LTD
service centre. Servicing
outside the warranty period is still available, however this will be chargeable. If the
power supply cord becomes damaged the manufacturer or an approved service agent
must replace it.