Salton Elite STF-02E Instructions And Warranty - page 3
3
2
.
MODEL AND SPECIFICATIONS
Model:
STF- 02E
Rated Voltage:
230V
Rated Frequency:
50HZ
Input Power:
45W
3.
PARTS NAME AND LOCATION
NO. Name of Part
1
Front base
2
Near base
3
Front upright column
4
Near upright column
5
Wind Wheel
6
Top Panel
7
Piano Switch
8
Oscillation Switch
9
Time button
10
Transparence Cover
11
Near Shell
12
Power cord
4. INSTALLATION
Refer Fig 1:
1. Thread the electric wire through the slot of near column(4), then tightly clip column(3)
and near column(4) mutually;
2. Then aim the locating pin of column(3)(4) at the locating hole of the micro motor
stand(5), fix the micro motor stand and the column with 4 pieces of M5X12 cross-head
screws by a screwdriver;
3.
Thread the electric wire(12) through the middle gate of the rear base frame and the wire
clipping slot, fasten the front base frame(1) and the rear base frame (2)mutually, then
match column(3) (4)with the base frame and fix it with 4 pieces of M5X12 cross-head
screws by a screwdriver.
Figure 1