Salton Elite STF04E Instruction Manual - page 4
ASSEMBLING YOUR FAN
1. Lay the fan down, with the front grill and control panel facing up.
2. Assemble the base of the fan by interlocking the guides on base A with base B,
ensuring the power cord is threaded through the large hole in the centre of the bases.
See Figure 1.
3. Secure the four short screws supplied into the four holes in a row at the bottom of the
base. See Figure 2.
4. Align the base with the fan, and secure using the four long screws supplied. Ensure
that the power supply cord is tightly routed to the back of the base, and secure the
cord under the Wire locating trough at the back of the base next to the power supply
cord exit hole.
5. Check that all screws are secured tightly, and place the fan on its base. The Tower
Fan is now ready for use.
4