Salton SFH 804 Instructions And Warranty - page 5
5
= “Cool air”. Only the fan is switched on.
In this position you can use the cool air ventilating of the fan for
summer use.
= “Warm air” (1000 W) for gradual heating-up.
= “Hot air” (2000 W) for quick heating-up.
Switching off the heater:
To switch off the heater turn the selector switch C to the position ( . Remove the mains
plug from the wall-socket.
Always unplug the heater from the wall-socket when not in use.
Revolving
The heater cans 90 degree revolving by hand.
Fig.1
Wall mounting
This heater can also be wall mounted to save space.
For mounting the heater see fig. 2 to 4:
Pay attention to the above mentioned safety instructions and following notes to location
and mounting:
If you attach the heater to the wall, you must keep a minimum distance of 120 cm of
the lower heater housing up to the floor, a minimum distance of 50 cm from the
ceiling to the upper heating house and to keep a safety distance of the least 120 cm
to combustible subjects, such as shelves, furniture, pieces of furniture, walls, curtains
or buildings or similar. There is a fire risk! The heater’s openings must be not
obstructed in any way.
The device may not be fastened to walls made from synthetic material, or other
flammable materials, for example wood, panels, paper or similar. By disregard it can
come to the fire risk!