Salton SJM40 Instructions And Warranty - page 7
7
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable. Do not open or change
any parts by yourself. Please refer to a qualified electrical service department or return to the
supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the speed control is set to “0”.
The motor should be wiped with a damp cloth only. Do not let water enter the motor.
All parts except the motor are dishwasher suitable.
Do not use bleach or other abrasive substances or solvents to clean your appliance as it can
damage the finish.
Do not immerse the motor in water or any other liquid, or hold it under a running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.
STORING THE APPLIANCE
Ensure that the unit is switched to the OFF position. Unplug the appliance from the power
outlet.
Clean all the parts as instructed above. Ensure that all parts are dry before storing.
Store the appliance in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly, please
check the following:
You have followed the instructions correctly
That the unit has been wired correctly and that the wall socket is switched on.
That the mains power supply is ON.
That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem
and you need to return the appliance, make sure that:
The unit is packed carefully back into its original packaging.