Instruction manual model no’s ph60/ph60-1/ph60-c pi control programmable thermostatic radiator valve control head salus ph60pi manual 014_89 17/05/2013 11:58 page 1.
Ph60 instruction manual 2 product compliance this product complies with the essential requirements of the following ec directives: • electro-magnetic compatibility directive 2004/108/ec • low voltage directive 2006/95/eec • ec marking directive 93/68/eec safety information these instructions are app...
Introduction a thermostatic radiator valve (trv) is a self-regulating valve fitted to hot water heating system radiators. The trv controls the temperature of a room by regulating the flow of hot water to the radiator. The ph60 from salus controls is a stylish and accurate trv programmable control he...
Installation please read the important safety information at the start of this manual before you begin to install the device.The ph60 is easily installed – whether fitted as part of a new installation, or in place of an existing trv control head. Battery installation and replacement after installati...
Ph60 instruction manual 5 display comments all the indicators on the display and the backlight will be turned on for two seconds. The internal firmware version will then be displayed for one second (the numbers displayed may be different to the one shown here, depending on the firmware revision of t...
At the start of the adaptation procedure, the controller will check the battery and gear assembly; if there are any problems, the following screens will be displayed: display error this example shows the battery voltage is low. This example shows the gear assembly is not installed. If there is a pro...
Ph60 instruction manual 7 an example of an error message is shown below: display error description error 2 (er2 – stroke too long) occurred during the adaptation process. Pressing any key will restart the adaptation process. It is also possible to enter adaptation mode manually if the ph60 is in nor...
User interface and controls the status and operation of the ph60 can be clearly seen on the backlit liquid crystal display (lcd) - this display allows the user to see at a glance the current status of the valve controller. The display consists of a combination of symbols and alphanumeric displays. T...
Ph60 instruction manual 9 indicator description function temperature in normal mode indicates the indicator room temperature. In programme mode indicates the set temperature. In temperature mode indicates the set temperature. Valve status a ‘water flow’ animation is indicator shown when the valve is...
Ph60 instruction manual 10 indicator description function econ in auto mode indicates the set temperature temperature is ‘econ’. Mode indicator in manual mode indicates the set temperature is ‘econ’. In programme setting mode indicates the set temperature selected for the hour is ‘econ’. Party in no...
Indicator description function ‘off’ mode indicates the ph60 is operating indicator in ‘off’ mode - a special manual control mode that closes the trv regardless of the room temperature or set temperature. Programme in normal mode indicates the profile indicator controller is running in auto (program...
User control function summary: key / operation functions + increases or changes the selected setting. - decreases or changes the selected setting. Set enters menu or confirms a menu selection select selects item when in set mode auto/manual in normal mode, press to choose the auto programme, or any ...
Ph60 instruction manual 13 normal mode normal mode is the default operating mode of the ph60. This is a typical normal operating mode display. • the time is midnight, and the day is 1 (monday) • the room temperature is 23 ºc • the valve animation shows that the trv is open • the profile indicator at...
Display operation in this example, the ph60 is set to operate in ‘comfort’ mode. The temperature mode indicator will flash if temporary override mode has been selected. In this example, the ph60 is set to operate in ‘econ’ mode. When operating in manual mode, programmes are not used – the profile in...
Display operation press the auto/manual key once and the ph60 will display ‘set’ and the current control mode. Press and hold the set key or wait for 8 seconds to return to normal mode without making any changes. Press the auto/manual key again (or the select key) to change the control mode. Use the...
Accessing the menus to access the mode screens, press the set key as indicated in the table below: display operation press and hold the set key for one second to enter the time setting mode. The display will change to show ‘cloc’. Press and hold the set key for four seconds to enter the programme se...
Ph60 instruction manual 17 time setting mode the time setting mode allows the setting of the day and time – these are the only items displayed on the screen. • initially, the hour will be flashing; press the + or – keys to change the setting. • press the select key to select the minutes; press the +...
Day of week factory preset programme monday tuesday wednesday thursday friday saturday sunday in the examples shown above, the time between 0600 to 2200 will represent a ‘comfort’ setting ( high set point temperature) the blank areas will represent an econ setting ( low set point temperature) please...
Ph60 instruction manual 19 all the set temperatures are adjustable in 0.5 ºc steps. ‘comfort’ and ‘econ’ are used in programmes. If these default programmes are not suitable for your particular situation, reprogramming the ph60 with your own settings is a very straightforward operation. After enteri...
Display operation initially, day 1 (monday) will be displayed. The clock hour will be flashing, along with a flashing cursor on the profile indicator at the bottom of the display. Press select to change the programme time. In this example, the time has changed to 11:00, and the set temperature is us...
Ph60 instruction manual 21 programme copy mode the ph60 programme copy mode allows the user to copy one day’s programme settings to another day. If no keys are pressed for 30 seconds, the copy will be cancelled andthe ph60 will automatically return to normal mode. Display operation on entering progr...
Ph60 instruction manual 22 option setting mode there are 5 user option modes available: language, stroke position, open window detection sensitivity, temperature offset and limescale protection: display operation the first option is language. "lang" for english. "spra" for german. The current langua...
Display operation the fourth option is the temperature offset. ‘ofs’ and the current offset temperature setting is displayed. Pressing the + or – keys will allow you to change the setting between – 3.5 to + 3.5 ºc in 0.5 ºc steps. Pressing the set key will confirm the choice and move to the next scr...
Ph60 instruction manual 24 adaptation mode it is possible to enter adaptation mode manually if the ph60 is in normal mode. This is done by pressing the set key until ‘adap’ is shown on the display. Releasing the set key will start the adaptation process. If an error is displayed during the manually ...
Ph60 instruction manual 25 other functions and controls valve status indication the status of the trv is displayed on the ph60 is shown by the valve status indicator: display status when the trv is closed, the ph60 will display a ‘closed valve’ indicator. When the trv is open, the ph60 will display ...
Ph60 instruction manual 26 backlight the backlight of the ph60 is switched on automatically whenever any of the keys are pressed. The backlight will remain illuminated for 10 seconds after the last key press. The backlight does not operate if the ph60 is in adaptation mode, or if the battery is low....
Open window detection if a door or window is opened, this may cause a sudden drop in the room temperature and cause the trv to be opened by the controller. This drop in room temperature is usually temporary, and in this situation it is usually better to turn off the heating. When open window detecti...
Ph60 instruction manual 28 reset button the reset button is provided as a way to restore the ph60 to its default factory settings. Pressing this button will delete any previously entered settings. The default factory settings for the ph60 are: function default setting operating mode adaptation mode ...
Keylock the ph60 keypad can be locked to prevent any accidental changing of the controller settings. The keylock mode can be turned on when the ph60 is in normal mode by pressing and holding the select key for three seconds. Once active, pressing any key will show ‘loc’ on the display, as shown belo...
Ph60 instruction manual 30 low battery detection the ph60 constantly monitors battery voltage. When battery voltage falls below a preset point, the low battery indicator will be shown on the display as shown below: the low battery indicator will continue to be displayed until the battery voltage ret...
Off mode the ph60 has a special manual control mode (‘off’ mode) that will close the trv regardless of the room temperature or set temperature. Off mode is generally used when heating is not needed, for example in the summer. When off mode is operating, it will be indicated on the display as shown b...
Ph60 instruction manual 32 energy tip one way to set and use your heating system is to find the lowest temperature setting that you are comfortable with in each room, and then leave it set at this temperature. You can do this by setting the ph60 to a low temperature, (for example 17 °c) and then inc...
Product specification model: ph60 type: electronic programmable thermostat for radiator valve control. Clock display modes: 24 hour clock with day of week display. Tolerance: ±60 seconds per month programming programming modes: user selectable for 7 day individual, 5/2 or 7 day options hourly progra...
Control modes operating modes: auto (program) or manual (in manual mode, user can select one of 6 preset temperature modes) programme range step off n/a n/a comfort 7 – 30 ºc 0.5 ºc econ 7 – 30 ºc 0.5 ºc party 15 – 30 ºc 0.5 ºc holiday 7 – 15 ºc 0.5 ºc frost 4 – 7 ºc 0.5 ºc power supply power source...
Salus controls warrants that this product will be free from any defect in materials or workmanship, and shall perform in accordance with its specification, for a period of two years from the date of purchase. Salus controls sole liability for breach of this warranty will be (at its option) to repair...
Email: sales@salus-tech.Com tel: 01226 323961 email: tech@salus-tech.Com tel: 01226 323961 sales : technical : salus controls plc, salus house, dodworth business park south, whinby road, dodworth, barnsley s75 3sp salus-tech. 15/05/2013 ver013 salus ph60pi manual 014_89 17/05/2013 11:59 page 36.
