- DL manuals
- Salus
- Controller
- TRV10RFM
- Instruction Manual
Salus TRV10RFM Instruction Manual
Summary of TRV10RFM
Page 1
Wireless radiator controller model: trv10rfm i n s t r u c t i o n m a n u a l.
Page 2: Icons Used In This Manual:
02 trv10rfm instruction manual contents of the box icons used in this manual: safety important info trv10rfm 2 aa batteries adapter manual contents: box contents introduction product compliance and safety information installation user interface status/led indication installers notes warranty box con...
Page 3: Introduction
Product compliance & safety information introduction the trv10rfm is a battery-powered, mini-size thermostatic radiator valve (trv) controller using zigbee wireless communication. Simply replace the existing, passive head on the standard radiator valve with the trv10rfm (referred to from now on as t...
Page 4
System overview to achieve the best control from the unit and thermostat, we recommend they are used with the salus system receiver configured to rx1. The system receiver will turn the boiler on or off when requested by the thermostat. See your boiler receiver manual for more information about the r...
Page 5
Trv10rfm instruction manual 05 valve 1 3 2 checking the compatibility of your heating system the salus trv10rfm is compatible with the majority of thermostatic radiator valves. Before fitting, please check your valve is suitable for use with the salus trv. Note: if all the measurements are as stated...
Page 6
06 trv10rfm instruction manual checking the compatibility of your heating system 4 our ra adapter also fits this valve. Once fitted the ra adapter should look like this. If you can not see any thread on the valve and it looks like this picture, you may be able to use the ra adapter supplied..
Page 7
Trv10rfm instruction manual 07 1 2 3 4 5 6 installing the unit remove the battery door on the side of the unit. Insert the batteries, ensuring correct orientation. The led on the unit flashes green then flashes red before changing to solid red. When it is solid red, place the unit over the radiator ...
Page 8
08 trv10rfm instruction manual preparing to pair the unit 1 press and hold the button on the co10rf coordinator for five seconds. This puts the coordinator in pairing mode. See your co10rf coordinator manual for more information. 2 ensure the wireless thermostat is powered up and ready for pairing. ...
Page 9
Trv10rfm instruction manual 09 1 2 3 pairing the unit press and hold the pairing button for 10 seconds. You can pair up to three units with one thermostat. Pair the units room by room. Read page 38 to 40 of your wireless thermostat manual when the red led on the unit starts to flash. You have paired...
Page 10
10 trv10rfm instruction manual led indication pairing button manual open/ status indication manual close/ status indication leaving the network using the unit once paired to a thermostat, press and hold the pairing button on the unit for 10 seconds. The red and green status leds come on together for...
Page 11: Auto Lock Function
Trv10rfm instruction manual 11 using the unit auto lock function auto lock function is disabled until you have gone through the pairing process. After pairing, the trv will auto lock after 5 minute if no buttons have been pressed. Unlocking the buttons to unlock the buttons, press the pairing and cl...
Page 12: Protecting Against Frost
12 trv10rfm instruction manual using the unit restoring factory default settings press the pairing, open, and close buttons together for 10 seconds. Protecting against frost when you have manually closed the valve, the unit automatically enables frost protection. Frost protection starts only when th...
Page 13: To Do This…
Trv10rfm instruction manual 13 button usage to do this… press the… leave the network pairing button for 10 seconds (when unit already in network) pair with thermostat pairing button for 10 seconds put unit in automatic mode short press pairing button fully open the valve open button for 3 seconds fu...
Page 14: When...
14 trv10rfm instruction manual led indications when... The leds... Valve power switched on or after reset unit adapting to valve unit has not joined network or has not paired to thermostat unit paired to thermostat and in auto mode leaving network identifying the network software version indication ...
Page 15: When...
Trv10rfm instruction manual 15 when... The leds... Valve wireless link to thermostat lost normal operation battery low error installing auto mode manual open manual close auto mode auto mode manual open manual close window open mode active green and red flash alternately after short press on open or...
Page 16
16 trv10rfm instruction manual long press to manually open led flashes green once and then goes out. To check status refer to previous page. Long press to manually close led flashes red once and then goes out. To check status refer to previous page. Short press to return to auto mode. Red led will f...
Page 17: Model
Trv10rfm instruction manual 17 technical detail model trv10rfm type hydraulic radiator valve dc motor m30 x 1.5 input three push buttons: led indicator bi-colour, red/green valve adaptation automatic power source 2x aa batteries battery life 14 months (low battery indication) control method modulati...
Page 18
Notes 18 trv10rfm instruction manual.
Page 19
Salus controls warrants that this product will be free from any defect in materials or workmanship, and shall perform in accordance with its specification, for a period of five years from the date of installation. Salus controls sole liability for breach of this warranty will be (at its option) to r...
Page 20: Salus North America
Www.Salusna.Com salus north america 850 main street redwood city ca 94063 t: +1-650-360-1725 e: sales@salusna.Com maintaining a policy of continuous product development, salus controls plc reserves the right to change specification, design and materials of products listed in this brochure without pr...