Salus VS30W Installation Manual
L
VS30
L N
SL
S1 S2
NSB
OUTPUT
N
M
T
AC 230V
Note: Use the rear plate of the VS30 thermostat only with this model.
Note: During the first start-up, thermostat will automatically start time and date
setting - in this case go to step 4.
Note: In the KL06 wiring centre, the SL terminal is marked with an arrow
icon .
Installation Manual
Programmable, wired thermostat with digital display
for the control of temperature in UFH & RAD systems
Model: VS30W (white), VS30B (black)
VII 2017
Introduction
The VS30 thermostat controls temperatures of individual heating zone
in underfloor heating systems. Thermostat allows for significant savings
thanks to the possibility of maximum reduction the set temperature.
The full version of the manual in PDF format is available on the website
www.salus-controls.eu
Product Compliance
This product complies with the following EU Directives: Electromagnetic
Compatibility 2014/30/EU, Low Voltage Directive 2014/35/EU and
RoHS 2011/65/EU. Full information is available on the website
www.saluslegal.com
Safety Information
Use in accordance with national and EU regulations. Use the device only as
intended, keeping it in a dry condition. The product is for indoor use only.
Installation must be carried out by a qualified person in accordance with
national and EU regulations.
Terminals description
Terminal
Description
L,N
Power Supply 230 V AC
NSB
Night SetBack (output 230 V AC)
SL
Switched output (230 V AC)
S1, S2
External temperature sensor
Proper thermostat placement
LCD Icon description
Wiring diagrams
Time and date setting
Installation
M
M
150 cm
min 20 cm
Button Function
Increasing / decreasing temperature or value
Selection of the operating mode, switching between values
Short press - selection confirmation
Long press - entry to or exit from the menu
Long press causes blocking or unlocking the thermostat
Long press enters the installer mode
+
+
+
Button Functions
2 3 4 5 6 7 8
9
10
11
12
13
14
16
19
20
1. Current active mode
2. Comfort mode
3. Standard mode
4. Economic mode
5. Automatic mode
6. PARTY mode
7. Holiday mode
8. Frost protection mode
9. Temperature unit
10. Manual mode / temp. override
11. Current / set temperature
12. Program number
13. AM/PM
14. Key lock
15. Day of the week
16. Settings
17. Time
18. Additional temp. sensor
19. Cooling
20. Heating
Importer:
SALUS Controls plc
Salus House, Dodworth Business Park
Whinby Road, Barnsley S75 3SP,
United Kingdom
DISTRIBUTOR OF SALUS CONTROLS:
QL CONTROLS Sp. z o.o., Sp. k.
Rolna 4,
43-262 Kobielice,
Poland
www.salus-controls.eu
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc reserve the right to
change specification, design and materials of products listed in this brochure without prior notice.
VS30 thermostat in connection with actuator or pump
OR
VS30 thermostat in connection with a boiler with a “NO” voltage free
terminal through the RM-16A relay
VS30 thermostat in connection with wiring centre
VS35
L
L
N
N
L N
SL
SL
S1 S2
NSB
INPUT
T
L N SL
KL08NSB
KL06
VS30
L N
SL
S1 S2
NSB
OUTPUT
T
L
N
AC 230V
In this diagram, the VS30 thermostat manages the NSB function,
more details about NSB function can be found on the next page.
NSB function is not active.
The VS30 thermostat has been designed for flush mounting in
a standard electrical box with a diameter of 60 mm.
L
AC 230V
VS30
RM
-16A
L
NO
COM
INPUT 230 V AC
OUTPUT
POWER SUPPLY
230 V AC / 50 Hz
NC
SL
N
L
N
SL
S1 S2
NSB
OUTPUT
N
T
1
2
3
1
15
17
18
1
5
4
3 sek.
Press any button to highlight the screen, then follow the steps below:
2
6
7
3
Select the time format
with or buttons.
Press to confirm the changes.
Press to confirm the changes.
Similarly to steps 5 and 6, set the minutes, year, month and day.
Use or buttons
to set the hour.
An additional temperature sensor is optional.
T