- DL manuals
- Sam
- Network Router
- Sirius 830
- Installation And Quick Start Manual
Sam Sirius 830 Installation And Quick Start Manual
Summary of Sirius 830
Page 1
Www.S-a-m.Com installation & quick start manual sirius 830 router a 288 x 288 non-expandable 3g compliant router, with up to 140 multiviewer outputs in a 15u chassis.
Page 2
Sirius 830 installation manual www.S-a-m.Com issue 2 rev 2 page 2 © 2016 sam.
Page 3
Sirius 830 installation manual www.S-a-m.Com contents issue 2 rev 2 page 3 © 2016 sam contents 1. About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 contact details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4
Sirius 830 installation manual www.S-a-m.Com contents issue 2 rev 2 page 4 © 2016 sam 8.1 power supply shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 8.2 power distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5
Sirius 830 installation manual www.S-a-m.Com about this manual issue 2 rev 2 page 5 © 2016 sam 1. About this manual this manual describes the installation of the sirius 830 router. Refer to the sirius 800 user manual and the workbench manual for details on configuring hardware and software. Refer to...
Page 6
Sirius 830 installation manual www.S-a-m.Com about this manual issue 2 rev 2 page 6 © 2016 sam.
Page 7
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 7 © 2016 sam 2. Warnings and precautions explicación de los símbolos de seguridad Éste símbolo refiere al usuario información importante contenida en la literatura incluida. Referirse al manual. Éste símbolo ind...
Page 8
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 8 © 2016 sam turvamerkkien selitys tämä merkki tarkoittaa, että laitteen mukana toimitettu kirjallinen materiaali sisältää tärkeitä tietoja. Lue käyttöohje. Tämä merkki ilmoittaa, että laitteen sisällä on vaaral...
Page 9: Caution
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 9 © 2016 sam 2.1 explanation of safety symbols 2.2 safety warnings servicing instructions, where given, are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any actions o...
Page 10: Laser Safety
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 10 © 2016 sam 2.4 fiber output modules warning 2.5 cable management it is important that the cabling to and from the router is correctly labelled and routed. This will simplify the work required if the installat...
Page 11
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 11 © 2016 sam 2.7 earth cables 2.7.1 important protective earth information due to the high leakage current, ensure that all of the power supply shelves are grounded to the protective earth. Earth studs are prov...
Page 12
Sirius 830 installation manual www.S-a-m.Com warnings and precautions issue 2 rev 2 page 12 © 2016 sam 2.8 safety standards this equipment complies with the following standards: en60950-1 2006 safety of information technology equipment including electrical business equipment. Ul1419 (3rd edition) - ...
Page 13
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 13 © 2016 sam 3. Prerequisites this chapter describes the electrical and space requirements for the sirius system. 3.1 size requirements make sure that sufficient space is available for the sirius 830. For ventilation purp...
Page 14
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 14 © 2016 sam 3.1.2 power supply shelf the power supply shelf is a separate 2u assembly. Power supply shelves are rack mountable and can be placed above, below or remote from the sirius frame. You must allow at least 250 m...
Page 15
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 15 © 2016 sam 3.2 weights 3.2.1 packed shipping crate shipping crate: between 153 kg (337 lbs) and 165 kg (364 lbs) when full (depending on modules fitted). 3.2.2 sirius 830 frame sirius 830: between 73 kg (161 lbs) and 85...
Page 16
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 16 © 2016 sam 3.3 ventilation a fully populated sirius 830 is ventilated by groups of fan modules mounted in the front and rear of the router. The vents in the front, sides and rear must not be obstructed and should be per...
Page 17
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 17 © 2016 sam 3.4 electrical requirements 3.4.1 important protective earth information see section 2.7.1 for full details of the protective earthing requirements. 3.4.2 cable management see section 2.5 for details on cable...
Page 18
Sirius 830 installation manual www.S-a-m.Com prerequisites issue 2 rev 2 page 18 © 2016 sam 3.4.5 power supply redundancy to ensure full dual redundancy, half of the power supplies should be powered from a separate power source to the other power supplies. Under normal operating conditions with dual...
Page 19
Sirius 830 installation manual www.S-a-m.Com unpacking the sirius 830 issue 2 rev 2 page 19 © 2016 sam 4. Unpacking the sirius 830 4.1 unpacking the sirius 830, power supply shelf/shelves and cables are supplied in a single wooden crate. The crate is delivered in the horizontal position with the cra...
Page 20
Sirius 830 installation manual www.S-a-m.Com unpacking the sirius 830 issue 2 rev 2 page 20 © 2016 sam • software dvd: workbench • software cd: pc touch-screen drivers 3. Carefully remove everything except the router from the crate and put them to one side for later use. 4. Carefully raise the crate...
Page 21
Sirius 830 installation manual www.S-a-m.Com installation issue 2 rev 2 page 21 © 2016 sam 5. Installation 5.1 installing into a 19" rack the sirius 830 has rack mount ears, for mounting into a 19" rack. Place the frame on a suitably specified and installed rack shelf for extra stability. 1. Move th...
Page 22
Sirius 830 installation manual www.S-a-m.Com installation issue 2 rev 2 page 22 © 2016 sam 5.1.3 securing the sirius 830 in a 19" rack 1. The rack mounting ears will be exposed once the sirius 830 door has been removed, see fig 9. 2. To secure the frame to the rack, use the correct rack mount screws...
Page 23
Sirius 830 installation manual www.S-a-m.Com installation issue 2 rev 2 page 23 © 2016 sam 5.2 mounting the power supply shelf into a 19" rack the power supply shelf can be placed above, below or remote from the sirius frame. The power supply shelf requires a 2ru space within a rack system. 1. Place...
Page 24
Sirius 830 installation manual www.S-a-m.Com installation issue 2 rev 2 page 24 © 2016 sam.
Page 25
Sirius 830 installation manual www.S-a-m.Com rear connectors issue 2 rev 2 page 25 © 2016 sam 6. Rear connectors this section shows the rear connectors on the sirius 830 router. 6.1 rear of sirius 830 frame fig 11. Shows a fully populated sirius 830 frame with bnc inputs and outputs. See section 2.5...
Page 26
Sirius 830 installation manual www.S-a-m.Com rear connectors issue 2 rev 2 page 26 © 2016 sam 6.2 control rear panel fig 13. Shows the control rear panel fig 13. Sirius 830 control rear panel connector function psu a psu b 25 way d-type socket x 2 - psu alarm inputs. Collects alarm signals from the ...
Page 27
Sirius 830 installation manual www.S-a-m.Com rear connectors issue 2 rev 2 page 27 © 2016 sam door ethernet rj45 ethernet - used to connect the door pc to an external network rs485 1 (com 3) to 4 (com 6) 9 pin d-type socket x 4 - serial control, these correspond to ports; com 3 to com 6 in workbench...
Page 28
Sirius 830 installation manual www.S-a-m.Com rear connectors issue 2 rev 2 page 28 © 2016 sam.
Page 29
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 29 © 2016 sam 7. Cabling 7.1 earthing for full details on the earthing requirements please see section 2.7. 7.2 cable management see section 2.5 for details on cable management. 7.3 mains power cables for full details on the mai...
Page 30
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 30 © 2016 sam fig 15. Cable connector assembly instructions (continued).
Page 31
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 31 © 2016 sam 7.4 ethernet cabling (optional) the router can be connected to a local network so that it can be monitored and configured from one or more remote workbench computers. Ethernet cables are used to connect the door pc...
Page 32
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 32 © 2016 sam 7.5 external panel cabling (optional) sam external panels can be connected to the router by using rs485 cables and the multidrop communications protocol (sw-p-06). The sirius 830 is supplied with a default database...
Page 33
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 33 © 2016 sam 7.5.2 example connecting a 6026776 2u control panel to the router this example assumes the following: • the default router database is loaded • a 6026776 (mimicking a 6276) control panel is available • only one con...
Page 34
Sirius 830 installation manual www.S-a-m.Com cabling issue 2 rev 2 page 34 © 2016 sam 7.5.2.1 6276 control panel rear panel if you are connecting the router to an older 6276 control panel the procedure is similar to the 6026776. The 6276 rear panel is different to the 6026776 control panel (for the ...
Page 35
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 35 © 2016 sam 8. Power supplies 8.1 power supply shelf a sirius 800 power supply shelf is a separate 2ru assembly which contains up to four sealed power supply units (psu’s), see fig 20. The power supply shelf is rack-mou...
Page 36
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 36 © 2016 sam in all router configurations, a non-redundant sirius 800 router uses one or more power supply shelves fitted with multiple psu’s. A failure of any one of these psu’s is considered a failure of the power feed...
Page 37
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 37 © 2016 sam 8.2 power distribution the power supply shelves provide 48 v dc for distribution to the entire frame. All router modules (inside the frame) have on-board dc to dc converters to locally supply the required vo...
Page 38
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 38 © 2016 sam 8.3.1 48 v dc power out cables see sections 8.3.2 to 8.3.4 (depending on the number of power supply shelves used) for the 48 v dc connection details. The 48 v dc cables are supplied by sam and can be ordered...
Page 39
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 39 © 2016 sam 8.3.3 dual power shelf connections this connection method is suitable for systems with two power shelves and allows an individual power supply shelf to be isolated if required (see the sirius 800 maintenance...
Page 40
Sirius 830 installation manual www.S-a-m.Com power supplies issue 2 rev 2 page 40 © 2016 sam 8.3.4 alternative dual power shelf connections this connection method is suitable for systems with two power shelves and is often used when a system is expanded from one power supply shelf to two power suppl...
Page 41
Sirius 830 installation manual www.S-a-m.Com powering the sirius 830 issue 2 rev 2 page 41 © 2016 sam 9. Powering the sirius 830 if you have installed the sirius 830 as described in the preceding sections, you can apply power to the sirius 830. 9.1 powering up the sirius 830 when power is connected ...
Page 42
Sirius 830 installation manual www.S-a-m.Com powering the sirius 830 issue 2 rev 2 page 42 © 2016 sam 9.1.2.1 configuration errors the router controller generates an error if one or more of the configured modules in the router fails to power up. Errors are displayed on the door screen and the router...
Page 43
Sirius 830 installation manual www.S-a-m.Com powering the sirius 830 issue 2 rev 2 page 43 © 2016 sam 9.2 powering down the sirius 830 before powering down the sirius 830 router switch the door pc off using one of the following methods: method 1 1. Navigate to the door pc main menu and touch the exi...
Page 44
Sirius 830 installation manual www.S-a-m.Com powering the sirius 830 issue 2 rev 2 page 44 © 2016 sam.
Page 45
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 45 © 2016 sam 10. Testing the sirius 830 this chapter describes how to test the router to ensure that it can route signals. You will need at least one video source and a video analyzer to check that the video sign...
Page 46
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 46 © 2016 sam 10.2 setting a route using the router door pc this example uses video input 1 routed to video output 2. If you have different input and output numbers simply substitute the correct numbers when worki...
Page 47
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 47 © 2016 sam 7. Route input 1 to output 2 using the door pc dial-up routing panel (fig 31.) or other control mechanism. 8. Touch the dial-up routing (video) button from the main menu screen and then touch the con...
Page 48
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 48 © 2016 sam 10.3 signal status catsii led signal status is driven directly from the input and output modules, and changes quickly when a fiber or bnc cable is connected to the sirius 830. 10.3.1 video signal cat...
Page 49
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 49 © 2016 sam 10.3.2 madi audio catsii colors 10.4 external control input and output port mapping the sirius 830 routers are supplied with workbench, liverunner and a sample/default database installed on the door ...
Page 50
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 50 © 2016 sam 10.5 default serial port configuration when the sample/default database is loaded on the router control module(s) the four rs485 serial communications ports on the rear of the router (see section 6.2...
Page 51
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 51 © 2016 sam 10.6 external control panels the sirius 830 is supplied with a sample/default database. The default database configures port 3 to use the multidrop communications protocol (sw-p-06). Port 3 supports ...
Page 52
Sirius 830 installation manual www.S-a-m.Com testing the sirius 830 issue 2 rev 2 page 52 © 2016 sam.
Page 53
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 53 © 2016 sam 11. Workbench the workbench software uses a database to store router and system configuration details. The workbench database is written (pushed) to the router controllers to configure them. Once the router contr...
Page 54
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 54 © 2016 sam 3. Follow the prompts to install workbench. 4. The choose components screen is displayed (fig 33.) • the greyed out components are mandatory but other components can be ticked or unticked as required. • the compo...
Page 55
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 55 © 2016 sam 5. Click next > once the installation components have been selected. 6. Follow the prompts to continue with the installation. Component description installation type: client client/ server server msi 4.5 microsof...
Page 56
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 56 © 2016 sam 7. When the installation is nearing completion the configuration helper will be displayed in a new window. The configuration helper indicates the status of each of the workbench components. The components can be ...
Page 57
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 57 © 2016 sam 10. The installation will be completed and the following screen is displayed to indicate that the installation has finished. 11. To stop workbench starting immediately after installation, uncheck the launch workb...
Page 58
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 58 © 2016 sam 11.2 associating workbench with the workbench database workbench requires a working connection to the workbench database. Until connected to the database, the install helper displays the connection as red (requir...
Page 59
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 59 © 2016 sam 11.2.1 create a new blank workbench database to create a new workbench database: 1. Expand the workbench database section. 2. Click on the words: click here to create databases and permissions. A command window d...
Page 60
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 60 © 2016 sam 11.2.3 move the existing workbench database from the router door pc 1. Ensure workbench is installed on the server or client server computer that the workbench database is to be hosted on, see section 11.1. 2. Ba...
Page 61
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 61 © 2016 sam 4. Click ok. The login screen displays, see fig 39. When workbench is first installed, there is only are two users, see table 10. 5. Type the username. As this is the first login the admin username is recommended...
Page 62
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 62 © 2016 sam 11.4 adding router control module(s) this step is only required if workbench is associated with a workbench database that doesn’t contain details of the controllers such as when connecting to a new blank database...
Page 63
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 63 © 2016 sam 5. When the controller type and setup type have been selected click the next button. 6. Enter the name, ip address and ip port for the main controller and, if the router contains two router control modules, tick ...
Page 64
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 64 © 2016 sam 7. Click the next button. 8. Select the use a factory or user default radio button. 9. Select the correct router type from the router type drop down list, s800 for the sirius 830 router. 10. Select the router con...
Page 65
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 65 © 2016 sam 13. A summary screen is displayed (fig 45.). If any of the parameters on this screen are incorrect, click the previous button to return to the screen that requires amendment. Edit the details, and continue throug...
Page 66
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 66 © 2016 sam 11.5 controller configuration there are three methods of configuring the router control module and an example of each is described in the following sections. 1. Select the inactive controller and click on the edi...
Page 67
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 67 © 2016 sam 11.5.1 configuration using the workbench configuration screens the workbench configuration screens are used to view and edit the router control module configuration settings (see fig 48.) to configure the router ...
Page 68
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 68 © 2016 sam example setting a switch point reference for a video input the following examples describe how to select the switch point reference for one or more of the video inputs in the matrix. For information on references...
Page 69
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 69 © 2016 sam 11.5.2 configuration using the generic configuration editor the generic configuration editor is used to edit a router control module in a logical tree structure format, see fig 50. It can be used to edit or view ...
Page 70
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 70 © 2016 sam 3. Select the parameter to be configured and make the change(s) required. There are three types of controls used to build the configuration. Depending on the selection, the appropriate control displays at the bot...
Page 71
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 71 © 2016 sam 11.5.4 pushing the configuration to the controller(s) any configuration changes must be pushed from the workbench computer to the router control module(s) so that the controller(s) can use the new configuration. ...
Page 72
Sirius 830 installation manual www.S-a-m.Com workbench issue 2 rev 2 page 72 © 2016 sam.